Challenger CLFP9 9,000 lb. Symmetric Two-Post Lift / Open-Top / Floor Plate

$7,051.00

With a 9,000 lb. capacity and 10’ 7/8” overall column height, Challenger’s CLFP9 2-post is ideal for low ceiling applications. 3-stage front and 3-stage rear arms provide maximum sweep, arm retraction and reach. A low-profile drive-over floor plate allows for easy vehicle positioning, which makes it

SKU: IRG0054 Categories: ,
Description

The Challenger CLFP9 brings proven design and solid construction to your shop. Read on for detailed specifications of the Challenger CLFP9, practical setup guidance and the answers to questions our customers ask most often.

Challenger CLFP9 Features and Specifications

  • 9,000 lb. lift capacity
  • 10’ 7/8” overall column height is ideal for servicing vehicles in a low ceiling height
  • Low profile drive-over floor plate for easy vehicle positioning
  • 3-stage front and 3-stage rear arms accommodate a wide range of common cars, trucks, vans as well as SUVs within the same service bay
  • Electric/hydraulic heavy-duty chain lifting operation with cable equalization to reduce ceiling height requirement
  • Dual-point mechanical pull-lock cable release system
  • Fully gusseted base plate design increases column rigidity
  • Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
  • Powder coat finish provides long-lasting durability
  • Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
  • Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage
Model Number CLFP9
Lifting Capacity 9,000 lbs.
Lifting Configuration Symmetric
Arms 3-stage front/3-stage rear
Rise Height 78.125”
Overall Height 120.875“
Overall Height (Cylinder Extended) 120.875“
Overall Width 137.5“
Drive-Thru Clearance 98.187“
Floor to Overhead Switch –
Front Arm Reach 24.5“ / 44.5“
Rear Arm Reach 24.5“ / 44.5“
Screw Pad Height 4” / 5.875“
Inside Columns 109”
Motor / Voltage 2HP, 208v-230v, 60Hz, 1Ph
Speed of Rise 50 s
Ceiling Height Required 10’ 2“
ALI/ETL Certified –
2’ Height Extension Available –
3’ Height Extension Available –
Colors Available Red, Blue

Challenger CLFP9 Photos

Challenger CLFP9 two post lift

Key Highlights of the Challenger CLFP9

Here is a quick summary of what stands out on this two post lift:

  • 9,000 lb. lift capacity
  • 10’ 7/8” overall column height is ideal for servicing vehicles in a low ceiling height
  • Low profile drive-over floor plate for easy vehicle positioning
  • Dual-point mechanical pull-lock cable release system
  • Fully gusseted base plate design increases column rigidity

Why Shops Choose the Challenger CLFP9

c => `The ${c.kw} is designed around the things that matter in a working bay: a stable lifting platform, dependable locks, and controls that are simple for every technician to learn. Whether you run a busy repair shop, a dealership service lane or a serious home garage, a quality ${c.noun} pays for itself in speed and comfort.`

Benefits of a Quality Two Post Lift

Reliable equipment is one of the best investments a shop can make. A dependable two post lift cuts down on wasted time, reduces repair costs over the life of the machine and helps your team produce consistent, professional results.

Common Uses for the Challenger CLFP9

c => `From quick oil changes to full undercarriage repairs, the ${c.kw} supports a wide range of service work. It is a smart choice for independent repair shops, fleet maintenance facilities, dealerships, restoration shops and enthusiasts who want professional-grade access at home.`

Installation and Setup

c => `Plan your bay layout before the ${c.kw} is delivered. Measure door openings, overhead clearance and the space needed to drive on and off safely. Check the electrical supply for the power unit and confirm your floor meets the anchoring specifications listed in the installation manual. Professional installation is strongly recommended for every lift.`

Safety and Maintenance Tips for the Challenger CLFP9

c => `Inspect the ${c.kw} daily before use: check cables, hoses, locks, arms and anchors for wear or damage. Always engage the mechanical safety locks before working under a vehicle and never exceed the rated capacity. Lubricate moving parts, check hydraulic fluid and have the lift inspected annually by a qualified inspector to keep it working safely for years.`

Buy the Challenger CLFP9 from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official Challenger website.

Challenger CLFP9 FAQs

Do I need special concrete for the Challenger CLFP9?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Challenger CLFP9 or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.

How is the Challenger CLFP9 shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the Challenger CLFP9 come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Choosing the Right Two Post Lift

When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Challenger CLFP9 is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.

It also pays to think about the future. Choosing a two post lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.

What to Expect After You Order

After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.

Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.

Getting the Most from Your Two Post Lift

A few simple habits make a big difference in how long equipment lasts. Keep the work area clean, store accessories where technicians can find them, and log maintenance so nothing gets missed. Shops that treat their two post lift as a long-term investment see better uptime and lower operating costs year after year.

Training matters too. Walk every new team member through safe operation of the Challenger CLFP9, review the manual together, and post key safety reminders near the equipment. A short refresher every few months keeps good habits in place.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Challenger CLFP9 9,000 lb. Symmetric Two-Post Lift / Open-Top / Floor Plate”

Your email address will not be published. Required fields are marked *

Shipping & Delivery