Challenger CL10AV3 10,000 lb ALI Certified Versymmetric Two-Post Adjustable Lift
$7,147.00
Challenger’s CL10V3 model features our exclusive Versymmetric ® technology to allow you to service the widest range of vehicles and maximize your bottom line. 3-stage front and 3-stage rear arms with our industry-first directSPOT™ design eliminate the need to shuffle a vehicle back and forth to swin
Looking for a reliable two post lift? The Challenger CL10AV3 delivers the durability, safety and ease of use that busy service bays demand. This page covers the Challenger CL10AV3 features, specifications, installation planning and care so you can buy with confidence.
Challenger CL10AV3 Features and Specifications
- 10,000 lbs. lift capacity
- Versymmetric® offset front arms provide directSPOT™ to vehicle lift points and safely lifts both symmetrically and asymmetrically within the same service bay maximizing service capabilities and revenue potential
- Oversized 5 in. diameter pulley and heavy duty 5/16 in. cable reduces stress on equalization system and increases cable life
- 48 in. elongated carriage design increases lift life
- Three settings for width adjustment, from 11′ 6.5″ to 12′ 6.5″
- Standard model fits 12 foot ceiling height. Additional 2 foot or 3 foot extensions available
- Padded overhead shut off system prevents vehicle damage
- Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
- Fully gusseted base plate design increases column rigidity
- Pulley-less jacketed single-point lock release system makes for smoother, easier operation and longer life
- Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage
- Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
- Premium powder coat finish provides long-lasting durability
- ALI® Certified
| Model Number | CL10AV3 |
|---|---|
| Lifting Capacity | 10,000 lbs. |
| Lift Configuration | Standard |
| Arms | 3-stage front/3-stage rear |
| Rise Height | 74.125” |
| Overall Height | 11′ 2″ or 11′ 8″ |
| Overall Height (Cylinder Extended) | 11′ 11″ |
| 2’ Height Extension Available | Yes |
| 3’ Height Extension Available | Yes |
| Overall Width | 11′ 6.5″ / 12′ .5″ / 12′ 6.5″ |
| Drive-Thru Clearance | 100″ / 106″ / 112″ |
| Floor to Overhead Switch | 10′ 8.5″ – 11′ 2.5″ |
| Front Arm Reach | 20” – 42” |
| Rear Arm Reach | 37.625” – 60” |
| Screw Pad Height | 3.875” – 6.125” |
| Inside Columns | 110″ / 116″ / 122″ |
| Motor / Voltage | 2HP, 208v-230v, 60Hz, 1Ph |
| Speed of Rise | 38 s |
| Ceiling Height Required | 12′ |
| ALI/ETL Certified | Yes |
| Colors Available | Red, Blue, Black |
Challenger CL10AV3 Photos




Key Highlights of the Challenger CL10AV3
Here is a quick summary of what stands out on this two post lift:
- 10,000 lbs. lift capacity
- 48 in. elongated carriage design increases lift life
- Three settings for width adjustment, from 11′ 6.5″ to 12′ 6.5″
- Standard model fits 12 foot ceiling height. Additional 2 foot or 3 foot extensions available
- Padded overhead shut off system prevents vehicle damage
Why Shops Choose the Challenger CL10AV3
c => `The ${c.kw} is designed around the things that matter in a working bay: a stable lifting platform, dependable locks, and controls that are simple for every technician to learn. Whether you run a busy repair shop, a dealership service lane or a serious home garage, a quality ${c.noun} pays for itself in speed and comfort.`
Benefits of a Quality Two Post Lift
The best two post lift is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.
Common Uses for the Challenger CL10AV3
c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`
Installation and Setup
c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`
Safety and Maintenance Tips for the Challenger CL10AV3
c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`
Buy the Challenger CL10AV3 from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.
For product manuals, technical documentation and manufacturer details, visit the official Challenger website.
Challenger CL10AV3 FAQs
Do I need special concrete for the Challenger CL10AV3?
Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Challenger CL10AV3 or contact us and we will confirm the requirements for your floor.
Is professional installation recommended?
Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.
How is the Challenger CL10AV3 shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the Challenger CL10AV3 come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Choosing the Right Two Post Lift
When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Challenger CL10AV3 is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.
It also pays to think about the future. Choosing a two post lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.
What to Expect After You Order
After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.
Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.
Related products
Atlas FM9SL In Ground Full Rise 9000 lbs Capacity Scissor Lift
BendPak MDS-6LPF Car Lift
BendPak P-9000LT Car Lift
BendPak SP-7XEF Car Lift
BendPak SP-7XEF Car Lift The SP-7XLF is the flush-mount version of BendPak’s full-rise scissor lift that can lift up to 7,000 lbs. This lift is perfect for a garage with a recessed area of concrete. The lift will practically be invisible. A collapsed SP-7XLF is extremely low-profile, but it can take
Challenger DX77 7700 lb ALI Certified Scissor Lift
Challenger DX77 7700 lb ALI Certified Scissor Lift Looking for a scissor lift that can easily handle many makes and models while ensuring maximum productivity and safety? Look no further than the DX77. With a robust 7,700 lbs. capacity and a synchronized hydraulic system, this lift can handle many v

Reviews
There are no reviews yet.