Mahle FluidPRO ATX-3 and Boost Transmission Fluid Exchange System
$4,989.00
Mahle FluidPRO ATX-3 and Boost Transmission Fluid Exchange System FluidPRO equipment from MAHLE Service Solutions offers a range of choices in fluid exchange equipment. The ATX+Boost offers technicians fully-automatic operation with precise fluid measurement to maximize efficiency. The added feature
The Mahle FluidPRO ATX-3 + Boost is a transmission fluid exchange system that services through the cooler lines or the dipstick tube. Digital weight scale technology, a diagnostic pressure gauge, and automatic fluid level adjustment make the ATX-3 an accurate, dependable machine for professional shops.
Mahle FluidPRO ATX-3 and Boost Transmission Fluid Exchange System
Features of the ATX+Boost:
Dipstick or Cooler mode selector, start engine indicator (on ATX-3 only)
Electronic diode illuminated keypad – fluid flow direction indicator verifies correct hook-up
Transmission diagnostic pressure gauge
New and used fluid sight glasses
Automatic fluid level adjustment +/- ½ quarts
Digital weight scale technology for accurate fluid exchange
Patented bypass circuit for vehicle protection
Product Specifications
Adapters Cooler line connection. Valved couplers for minimum spill. Standard adapters for Ford, GM, Chrysler, & Universal (most Asian).
Controls Microprocessor with digital keypad & light emitting diodes
Dimensions (H x W x D) 45 in x 28 in x 26.5 in (112 cm x 70 cm x 67 cm)
Fluid Tanks / Types 26 quarts (24.6 liters) each for both new & used fluids / Multiple fluid capability
Hoses 10 ft. (3 m) black & red (exchange); 8 ft. (2.5 m) black (empty used tank) ATX-3+Boost also includes 5 ft. (1.5 m) clear, attached to 8 ft. (2.5 m) lack hose for dipstick mode.
New Fluid Pump Positive displacement gear pump, 4 quarts (3.8 liters) per minute/includes diaphragm pump, 7.2 quarts (6.84 liters) per min. Diaphragm pump increases fluid suction rate in low-flow/temperature controlled transmission in both ATX-2+Boost & ATX-3+Boost units.
Operating Range Cooler Mode: 32° to 122°F (0° to 50°C) Dipstick Mode: 42° to 122°F (5.5° to 50°C)
Power Source 12 VDC – 10 Amp
Process Time 3 to 6 minutes average full exchange. Dipstick Mode is available on the ATX-3+Boost with 8 to 14 minutes* average full exchange.
Scale Accuracy ±0.03% over usable range
Warranty 1 Year–parts & labor
Weight ATX-2+Boost: 242 lbs. (110 kg) / ATX-3+Boost: 244 lbs. (111 kg)
Based on 12 quart exchange
ATX-3 + Boost Specifications
- Modes: cooler line and dipstick (dipstick mode on ATX-3+Boost)
- Average full exchange: about 3–6 minutes in cooler mode; about 8–14 minutes in dipstick mode (based on a 12-quart exchange)
- Fluid tanks: 26 quarts each for new and used fluid, with multiple fluid capability
- Scale accuracy: ±0.03% over the usable range
- Automatic fluid level adjustment: ±1/2 quart
- Power: 12 VDC, 10 amp
- Operating range: 32–122°F in cooler mode; 42–122°F in dipstick mode
- Hoses: 10 ft. black and red exchange hoses; 8 ft. black hose to empty the used tank
- Dimensions (H x W x D): 45 x 28 x 26.5 inches
- Weight: about 244 lbs.
- Warranty: 1 year parts and labor
ATX-3 Features
- Dipstick or cooler mode selector with start-engine indicator
- Illuminated keypad with fluid flow direction indicator to verify hookup
- Transmission diagnostic pressure gauge
- New and used fluid sight glasses
- Digital weight scale technology for accurate exchange
- Patented bypass circuit for vehicle protection
- Valved couplers for minimum spill
- Standard adapters for Ford, GM, Chrysler, and universal (most Asian) applications
Accuracy Through Digital Weight Scales
Many exchangers measure fluid by volume, which can drift with temperature and foaming. The ATX-3 uses digital weight scale technology, with scale accuracy of ±0.03% over its usable range. That precision helps ensure the amount of new fluid going in matches the old fluid coming out, and automatic level adjustment keeps the final level within about half a quart.
Cooler or Dipstick Service
A simple mode selector lets technicians choose cooler line or dipstick service. Cooler mode completes an average full exchange in about 3–6 minutes. Dipstick mode, available on the ATX-3+Boost, takes about 8–14 minutes and is useful when cooler line access is difficult. A start-engine indicator tells technicians exactly when to start the vehicle.
Built-In Vehicle Protection
A patented bypass circuit helps protect the vehicle during service. The flow direction indicator on the illuminated keypad confirms correct hookup, and a transmission diagnostic pressure gauge gives technicians extra insight into the system during the exchange.
Who Should Buy the ATX-3
- Dealership service departments
- Independent repair shops
- Quick lube and express service centers
- Fleet maintenance operations
- Shops that want both cooler and dipstick capability
Explore more service equipment in our shop equipment section.
How a Service Works
- Fill the new-fluid tank with the fluid specified for the vehicle.
- Select cooler or dipstick mode.
- Connect with the correct adapter using the valved couplers, or insert the dipstick probe.
- Confirm correct hookup with the flow direction indicator.
- Start the engine when the start-engine indicator signals.
- Let the machine complete the exchange, watching the sight glasses and pressure gauge.
- Allow automatic level adjustment, then verify the level per the manufacturer’s procedure.
Sight Glasses for Visual Confirmation
New and used fluid sight glasses let technicians and customers see the difference between old and new fluid during the exchange. It’s a simple, effective way to show the value of the service and confirm that the exchange is progressing as expected.

Diagnostic Pressure Gauge
The ATX-3’s transmission diagnostic pressure gauge provides useful information during service. Technicians can watch pressure behavior as fluid circulates, adding a diagnostic element to a routine maintenance service.
12-Volt Power
The ATX-3 runs on 12 VDC at 10 amps, so it can be powered from the vehicle without a wall outlet. That makes it easy to use in any bay.
Maintenance Tips
- Keep adapters and valved couplers clean and organized.
- Inspect the exchange hoses for wear or leaks.
- Empty the used tank using the 8 ft. drain hose.
- Clean tanks when switching fluid types.
- Follow Mahle’s maintenance and calibration guidance.
Operating Temperature Range
The ATX-3 operates from 32 to 122°F in cooler mode and from 42 to 122°F in dipstick mode. Keep the machine in a suitable environment, especially in cold climates, to ensure accurate, reliable operation.
Why Weight-Based Measurement Matters
Transmission fluid expands as it warms and can foam as it circulates. Volume-based measurement can be thrown off by those changes. Weight is more consistent. By measuring fluid with digital weight scales, the ATX-3 delivers a more accurate exchange and a more reliable final level. For shops, that means fewer comebacks for overfilled or underfilled transmissions and more confidence in every service.
Minimal Spills With Valved Couplers
Spills waste fluid, create slip hazards, and make a shop look less professional. The ATX-3’s valved couplers minimize spills when connecting and disconnecting. Combined with standard adapters for common applications, setup is clean and quick.
Protecting the Vehicle
A patented bypass circuit is designed to protect the vehicle during the exchange. The flow direction indicator prevents mistakes caused by reversed hoses. These safeguards give technicians and customers peace of mind that the service is being performed safely.
Growing Service Revenue
Transmission fluid exchanges are a valuable addition to any service menu. With cooler exchanges averaging about 3–6 minutes, the ATX-3 lets shops perform the service without tying up a bay for long. The sight glasses help advisors and customers see the results, which can support higher approval rates.
Explaining the Service to Customers
Tell customers that transmission fluid breaks down with heat and use, and that a machine exchange replaces a large share of the old fluid. Show them the sight glasses so they can compare old and new fluid. Mention the precise weight-based measurement that leaves their transmission at the correct level. Clear explanations build trust and help customers value the service.


Training Technicians
The ATX-3’s mode selector, indicators, and keypad make it intuitive. Train technicians on adapter selection, hookup verification, the start-engine signal, and final level checks. A short hands-on session is usually enough to build confidence.
Cooler Mode vs. Dipstick Mode
Cooler mode connects the ATX-3 inline with the transmission cooler circuit. The transmission’s pump pushes old fluid out as the machine supplies new fluid, completing an average full exchange in about 3–6 minutes. Dipstick mode works through the dipstick tube and takes about 8–14 minutes. It’s helpful on vehicles where cooler lines are hard to reach, have corroded fittings, or where a less invasive approach is preferred. Having both modes in one machine lets technicians choose the best method for each vehicle, which means more completed services and fewer referrals elsewhere.
Multiple Fluid Capability
Today’s vehicles use many different transmission fluid specifications. The ATX-3 supports multiple fluid types. Always use the fluid specified by the vehicle manufacturer, label the tank with the fluid currently loaded, and clean the tank thoroughly when switching types. Careful fluid management protects transmissions and keeps your shop’s service quality high.
A Typical Cooler Mode Service
The technician fills the new-fluid tank, selects cooler mode, and connects the valved couplers with the correct adapter. The flow direction indicator confirms proper hookup. When the start-engine indicator lights, the technician starts the vehicle. The ATX-3 monitors the exchange using its weight scales while the technician watches the sight glasses and pressure gauge. When the exchange is complete, automatic level adjustment brings the fluid within about half a quart of target. The technician shuts off the engine, disconnects with minimal spill, and verifies the level per the manufacturer’s procedure.
Fleet Applications
Fleets benefit from fast, accurate, documented service. The ATX-3’s quick cooler-mode exchanges help minimize downtime, and its 12-volt power makes it easy to use at different locations. Accurate weight-based measurement supports consistent results across many vehicles.
Dealership and Independent Shop Use
Dealerships value equipment that supports consistent, documented service across many technicians. The ATX-3’s clear indicators and automatic functions help standardize the process. Independent shops value flexibility and accuracy, especially when servicing many makes and model years. With cooler and dipstick modes, standard adapters for major manufacturers, and weight-based accuracy, the ATX-3 fits both environments well.
Quick Lube Efficiency
Quick lube centers need services that fit into short visits. Cooler-mode exchanges averaging just a few minutes allow technicians to add transmission service without lengthening wait times significantly. The illuminated keypad and indicators make the process easy to follow, even for newer team members.
Handling Used Fluid
The 26-quart used-fluid tank holds old fluid until you’re ready to empty it through the 8-foot drain hose. Transfer used fluid to approved containers and arrange recycling through a licensed provider. Responsible handling protects the environment and keeps your shop compliant.
Investing in Accuracy
Accuracy is what separates a professional transmission service from a basic one. With digital weight scales, automatic level adjustment, and built-in safeguards, the ATX-3 delivers precise results service after service. That reliability helps shops build trust with customers and reduce comebacks, making it a solid investment for any service department.

What Technicians Appreciate
Technicians often point to the flow direction indicator and the start-engine signal as features that remove guesswork. The sight glasses make it easy to show customers the results, and the valved couplers keep the work area clean. Together, these details make the ATX-3 a pleasure to use in a busy shop.
Comparing the ATX-3 to Basic Exchangers
Basic fluid exchangers can get the job done, but they often rely on volume measurement and manual monitoring. That leaves more room for error, especially when technicians are busy. The ATX-3 automates the critical parts of the process: it confirms hookup direction, signals when to start the engine, measures fluid by weight, and adjusts the final level automatically. Those features reduce the chance of mistakes and help every technician deliver the same high-quality result, no matter their experience level.
Durable Shop Equipment
At 45 inches tall and about 244 lbs., the ATX-3 is a solid, substantial machine built for daily use in professional shops. Its microprocessor controls, digital keypad, and durable hoses are designed to hold up to the demands of a busy service department, and Mahle backs it with a one-year parts and labor warranty.
Getting Started
If your shop is ready to offer fast, accurate transmission fluid exchanges, the ATX-3 + Boost is a strong choice. Contact our team to confirm it fits your needs, discuss adapters for the vehicles you service most, and arrange delivery. We’ll help you get the machine set up and your technicians comfortable so you can start offering professional transmission services right away.
Building a Transmission Service Program
To get the most from the ATX-3, build a simple transmission service program. Start by reviewing manufacturer recommendations for the vehicles you see most often. Train service advisors to check mileage and service history at each visit, and to explain the benefits of fresh fluid clearly. Use the sight glasses to show customers the condition of their old fluid. Record each service with the fluid type, amount, and mileage so you can remind customers when the next service is due. With a consistent program and a reliable machine, transmission service can become a steady, valuable part of your business.
Protecting Customer Relationships
Customers trust shops that perform careful, accurate work. A transmission left overfilled or underfilled can cause problems and comebacks. The ATX-3’s weight-based accuracy and automatic level adjustment help avoid those issues. When customers drive away with smooth-shifting vehicles and correct fluid levels, they’re more likely to return and recommend your shop to friends and family.
From accurate measurement to built-in safeguards, the ATX-3 gives your shop the tools to deliver professional transmission services that customers can count on every time.
Whether you run a dealership service lane, an independent repair shop, or a busy fleet garage, the ATX-3 brings speed, accuracy, and flexibility to every transmission fluid service. Its dual service modes let you handle more vehicles, its weight-based scales keep levels precise, and its thoughtful safeguards protect both the vehicle and your reputation. Reach out to our team at Ironside Garage with any questions about adapters, fluids, or setup, and we will help you put the ATX-3 to work quickly so your technicians can start delivering better transmission services right away.
It is a dependable, accurate machine that helps your whole team work faster and with more confidence on every transmission service.
Frequently Asked Questions About the ATX-3
Does it support dipstick service?
Yes, dipstick mode is available on the ATX-3+Boost.
How long does an exchange take?
About 3–6 minutes in cooler mode and about 8–14 minutes in dipstick mode, based on a 12-quart exchange.
How accurate is it?
The scale is accurate to ±0.03% over its usable range, with automatic level adjustment of ±1/2 quart.
How big are the tanks?
26 quarts each for new and used fluid.
What adapters are included?
Standard adapters for Ford, GM, Chrysler, and universal (most Asian) applications.
What is the warranty?
1 year parts and labor.
Support From Ironside Garage
Our team can help you choose the right fluid exchange equipment and answer questions about the ATX-3. Contact us any time.
Order the ATX-3 Today
The Mahle FluidPRO ATX-3 + Boost is a proven, powerful transmission fluid exchanger. Learn more on the Mahle Aftermarket website, or equip your bay with a lift from our car lifts collection.
Related products
Atlas SBC1200 X-Large Sandblast Cabinet
Atlas SBC1200 X-Large Sandblast Cabinet with Dual Doors & Vacuum The Atlas SBC1200 sandblast cabinet takes many of the already great features of the Atlas® SBC990 blasting cabinet and doubles them. The SBC1200 sandblast cabinet has two, front and rear, extra large top open loading doors and features
Atlas SBC420 Standard Sandblast Cabinet with Vacuum
Atlas SBC420 Standard Sandblast Cabinet with Vacuum The Atlas® SBC420 sandblast cabinet features dual side doors and a large front door for easy loading and unloading. The lower hopper stores the abrasive material for reuse or easy removal. The SBC420 cabinet is always ready when you are. The cabine
BendPak Bender
BendPak Bender heavy-duty “Blue-Bullet” exhaust pipe bender. This high-quality bender takes off like a shot and helps you reach your production target every time. Your purchase of the BB-2 comes complete with a die package and a dual-function end-finishing unit for precision OE expansions and flares
Cool Boss CB-28L Portable Evaporative Air Cooler
Cool Boss CB-28L Portable Evaporative Air Cooler The CB-28 is a medium-duty commercial-grade cooler that is well-suited for large industrial space cooling. When temperatures rise and you’re looking for a cost-effective cooling solution, look no further than Cool Boss. The CB-28 evaporative cooler pu
Ranger RP 20FC oil filter crusher
Ranger RP 20FC oil filter crusher is capable of applying 10 tons of force to virtually any used oil filter or can. With it you can easily reduce filters to 20% – 25% of their original size, as well as remove up to 95% of the oil. The RP-20FC includes an integrated collection chamber, collector downs

Reviews
There are no reviews yet.