QuickJack 5000TLX 5,000 Lb. Capacity Extended Portable Car Lift
$1,950.00
Why did we develop the 5000TLX? Simple: the 5000TL has a limiting lift point reach of 60″. That works for most vehicles, but there are vehicles whose manufacturer-recommended lift points are just an inch or two out of reach. That sounds like a small difference, but professional shops and smart DIY’e
The QuickJack 5000TLX is the extended-length version of QuickJack’s 5,000 lb. portable car lift. Its 76-inch frames and 43 to 66 inch lift point spread make the 5000TLX a great match for longer-wheelbase cars that standard frames can’t reach, while still lifting to 24 inches in about 30 seconds.
EXTENDED-LENGTH car lift design
The 5000TLX portable car lift has been redesigned to accommodate vehicles with longer wheelbases. We’ve increased the overall frame length and lift point spread by 6″. As a result, the minimum lift point spread is now 6″ longer, as well. Our new portable car lift design better accommodates longer wheelbases and/or extended lift point spreads.
TL minimum lift point spread: 37″
TLX minimum lift point spread: 43″
TL maximum lift point spread: 60″
TLX maximum lift point spread: 66″
TL overall frame length: 70″
TLX overall frame length: 76″
Features
Automatic safety locks
Features dual-position automatic safety locks on each TL frame. As the frames rise, these locks glide securely into place at mid-rise and full-rise. Disengage with a simple flip of the lock bar and your car lift is ready for a smooth descent.
Increased lifting height
QuickJack TL models are capable of lifting an extra 3-inches making it easier to perform vehicle maintenance tasks that are both routine and more involved. The extra room gives you more ability and versatility under the vehicle, while doing so in added comfort.
One-handed operation
By holding the pendant control in one hand, your other hand is totally free. No cranking or bending during lifting.
Accessories to increase versatility
Most QuickJack accessories were developed from customer suggestion and need. We offer many different lifting options and configurations to customize your QuickJack experience to fit your needs and specifications.
Tech specs

Lifting capacity
Lowered height
Lifting height
Lift point spread
Frame dimensions (ea.)
Other specs
79.5″ (L) x 15.25″ (W) x 5″ (H)
(2,015 mm x 385 mm x 129 mm)
What’s inside?
5000TLX Left Frame Assembly
5000TLX Right Frame Assembly
1x Hydraulic power unit with control
4x Medium rubber lift blocks (2″)
4x Tall rubber lift blocks (3″)
2x Short hydraulic hoses
2x Long hydraulic hoses
2x Frame-positioning handles
Fittings and thread tape for setup
Instruction manual
Requirements:
Up to 3 liters of Automatic Transmission Fluid
Air source to inflate air cylinders up to 50 PSI
Assembly tools
Note: QuickJack is shipped in three boxes
5000TLX Specifications
- Capacity: 5,000 lbs.
- Lowered height: 3 inches (frame only)
- Lift height: 21 inches with 2-inch blocks, 22 inches with 3-inch blocks, 24 inches max
- With adapters and pin: up to 26.75 inches
- Lift point spread: 43 to 66 inches
- Frame size (each): 76 inches long, 11 inches wide
- Frame weight: 81.5 lbs. each
- Power: 110V, 60Hz, single phase; power unit weighs 15 lbs.
- Time to full rise: about 30 seconds
Extended Length: Why It Matters
QuickJack redesigned the 5000TLX for vehicles with longer wheelbases. Compared with the standard 5000TL, the overall frame length and the lift point spread both grow by 6 inches. The standard model covers 37 to 60 inches; the 5000TLX covers 43 to 66 inches.
That shift matters if your car’s front and rear lift points are far apart. With frames that are too short, you either can’t reach both points or you end up lifting in the wrong spots. The 5000TLX lets you place the blocks where your manufacturer recommends, which keeps the lift stable and protects the body.
TL vs. TLX at a Glance
- Minimum lift point spread: 37 inches (TL) vs. 43 inches (TLX)
- Maximum lift point spread: 60 inches (TL) vs. 66 inches (TLX)
- Frame length: 70 inches (TL) vs. 76 inches (TLX)
If your vehicle’s lift points are closer together than 43 inches, the standard 5000TL may be the better fit. If they’re farther apart than 60 inches, the 5000TLX is the one to choose.
Automatic Safety Locks
Each 5000TLX frame has dual-position automatic safety locks that engage at mid-rise and full-rise as the frames go up. A simple flip of the lock bar releases them for lowering. Always rest the car on these locks before working underneath.
More Lift Height
Like all TL-series lifts, the 5000TLX lifts about 3 inches higher than older QuickJack models. That extra room makes routine work more comfortable and gives you more space for bigger jobs. With adapters and the pin, you can reach 26.75 inches.

One-Handed Pendant Control
Hold the pendant in one hand while the other stays free. There’s no pumping a jack handle or bending over while the car goes up. Just press and hold, and the 5000TLX lifts in about 30 seconds.
What Comes With the 5000TLX
- Left and right frame assemblies
- Hydraulic power unit with control
- Four 2-inch and four 3-inch rubber lift blocks
- Two short and two long hydraulic hoses
- Frame-positioning handles, fittings, thread tape, and manual
Setup also requires automatic transmission fluid, an air source for the air cylinders, and basic tools, as listed in the manual.
Vehicles That Benefit From the 5000TLX
The 5000TLX is designed for passenger vehicles up to 5,000 lbs. with longer wheelbases or widely spaced lift points. That often includes full-size sedans, grand touring coupes, station wagons, some crossovers, and long-wheelbase sports cars. Check your owner’s manual for your lift point locations and measure the distance between them. If it falls between 43 and 66 inches, the 5000TLX is likely a strong fit.
Who Should Buy the 5000TLX
- Owners of long-wheelbase cars that standard frames can’t reach
- Home mechanics replacing jack stands with a safer setup
- Enthusiasts who take their cars to track days
- Detailers who need easy access to lower panels and wheels
- Garages without room for a permanent post lift
Compare more models in our portable car lifts category.
How to Set Up and Lift
- Assemble the frames and prepare the power unit as described in the manual.
- Park on a flat, level, hard surface and set the parking brake.
- Use the positioning handles to slide each frame under the car.
- Choose 2-inch or 3-inch blocks and place them under the lift points.
- Raise a few inches and check each block’s contact.
- Lift to full height so the automatic locks engage.

Safety Reminders
Never exceed the 5000TLX’s 5,000 lb. rating. Always rest the vehicle on the mechanical locks before working beneath it. Keep people and pets clear while the lift moves, chock the wheels when working on one end, and check hoses and blocks before every use. Follow the QuickJack manual at all times.
Common Jobs With the 5000TLX
- Brake pads, rotors, and calipers
- Tire rotations and seasonal swaps
- Oil and filter changes
- Suspension work and coilover installs
- Exhaust inspections and upgrades
- Underbody cleaning and rust prevention
Where to Use It
Use the 5000TLX on smooth, level concrete or firm asphalt. Avoid gravel, grass, dirt, and slopes. Give yourself room to open the doors and move around, and keep the area well lit.
Care and Maintenance
- Inspect hoses and fittings for leaks.
- Keep quick couplers clean and capped.
- Check the fluid level in the power unit.
- Replace worn rubber blocks.
- Store frames upright and dry, ideally on wall hangers.
5000TLX vs. Floor Jack and Stands
Lifting a long car corner by corner with a jack takes time, and placing four stands correctly can be tricky. The 5000TLX lifts a full side in one motion, reaches the right lift points thanks to its longer frames, and holds the car on built-in locks. It’s faster, more stable, and much more comfortable to work with.

5000TLX vs. a Post Lift
Post lifts need tall ceilings, deep concrete, and a dedicated bay. The 5000TLX needs only a level floor, stores against the wall, and goes wherever you go. For most routine maintenance, 24 inches of lift is plenty.
Picking the Right Block Height
The block you choose changes the final lift height. With the 2-inch blocks, the 5000TLX lifts to about 21 inches. With the 3-inch blocks, it reaches about 22 inches. The frame’s maximum height is 24 inches, and with adapters plus the pin you can reach 26.75 inches. Lower cars often do best with the 2-inch blocks for easy positioning, while cars with more ground clearance may need the taller blocks for solid contact.
Always check contact after the first few inches of lift and adjust if a block isn’t seated squarely on the lift point.
Protecting Pinch Welds
Many longer cars are unibody vehicles that use pinch-weld seams as lift points. Flat blocks can bend or crush those seams. QuickJack pinch-weld blocks, sold as an accessory, cradle the seam and spread the load to help protect the body. If your car uses pinch-weld lift points, they’re a smart add-on for the 5000TLX.
Track Day Ready
Each 5000TLX frame weighs 81.5 lbs., and the power unit weighs 15 lbs., so the whole system can travel to track days and car events. With access to a 110V outlet, you can lift the car between sessions, swap wheels, check brakes, and lower it again in minutes.
Smart Storage
When you’re done, the frames stand on end or hang on QuickJack wall hangers. The power unit and hoses fit on a shelf. Your garage floor stays open for parking and other projects, and the 5000TLX is always ready for the next job.

Owner Tips
- Measure your lift point spacing before your first lift.
- Mark frame positions on the floor with tape for quick setup.
- Keep blocks, hoses, and the pendant in one labeled bin.
- Use wheel chocks when working on one end of the car.
- Wipe down the frames after outdoor or track use.
Saving Time and Money
With the 5000TLX, routine jobs like tire rotations, brakes, and oil changes become quick and comfortable. You’ll save on shop labor and gain the satisfaction of doing the work yourself. The faster setup also makes it easier to keep up with regular maintenance.
Measuring Your Car Before You Buy
The single most useful step before ordering is to measure your car’s lift point spacing. Find the front and rear lift points on one side of the car using your owner’s manual. Measure the distance between them, center to center. If the number falls between 43 and 66 inches, the 5000TLX should reach both points comfortably. If it’s shorter than 43 inches, the standard 5000TL may be a better fit. If your car is heavier than 5,000 lbs., look at a higher-capacity QuickJack model.
It also helps to check the ground clearance at each lift point. This tells you whether the 2-inch or 3-inch blocks will work best, or whether you’ll want adapters for extra reach.
Why Choose a Portable Lift?
Portable lifts like the 5000TLX have become popular because they solve real problems for home mechanics. Many garages have low ceilings, thin slabs, or limited space, which rules out permanent lifts. Renters can’t install a post lift at all. A portable lift avoids all of those issues. It needs only a level floor, works in almost any garage, and can move with you if you relocate. For most routine maintenance, it provides all the height and access you need.
Built for Repeated Use
The 5000TLX uses sturdy steel frames, a dependable hydraulic system, and durable rubber blocks, all designed for regular use. Keep the system clean, check fluid and hoses periodically, and replace blocks as they wear. With that simple care, your lift will be ready for countless tire swaps, brake jobs, and oil changes for years to come.

Your First Week With the 5000TLX
Start with a simple tire rotation to get used to the setup. Measure, position the frames, place the blocks, and lift slowly while checking each contact point. Once the car is resting on the locks, you’ll quickly see how much easier under-car work becomes. By the second or third lift, setup takes just a few minutes.
Planning Your Garage Around the 5000TLX
Choose a level parking spot with enough room to open the doors on both sides. Because the 5000TLX frames are 76 inches long, make sure there’s space to slide them in from the side without hitting cabinets, tool chests, or walls. Keep the power unit near a 110V outlet and route the hoses where they won’t be stepped on or pinched. Wall hangers mounted nearby keep the frames off the floor yet close at hand. Good overhead lighting will make every under-car job easier.
Once your space is set up, lifting becomes a quick routine: roll in, slide the frames under, place the blocks, and press the button. Many owners find they work on their cars more often simply because getting underneath is no longer a hassle.
What Owners Appreciate Most
Owners of longer cars often say the 5000TLX finally gave them a portable lift that actually fits. The extra frame length means no more compromising on block position. They also appreciate the automatic locks, the one-handed pendant, and how quickly the car goes up. Add in easy storage and track-day portability, and it’s easy to see why the 5000TLX is a favorite among enthusiasts with longer vehicles.
If you have been putting off brake jobs, tire swaps, or simple inspections because getting under a long car felt like too much work, the 5000TLX changes that. It gives you a safe, stable, and comfortable way to reach every part of the underside, then folds away so your garage stays just as useful as before. That combination of reach, safety, and convenience is hard to beat.
Frequently Asked Questions About the 5000TLX
How is the 5000TLX different from the 5000TL?
The 5000TLX has 6-inch longer frames and a 6-inch wider lift point range (43 to 66 inches) for longer vehicles.
What is the capacity?
The 5000TLX is rated for 5,000 lbs.
How high does it lift?
Up to 24 inches, or 26.75 inches with adapters and pin.
How long does it take to lift?
About 30 seconds to full rise.
What power does it use?
Standard 110V, 60Hz, single-phase power.
How much does each frame weigh?
Each frame weighs 81.5 lbs.
Support From Ironside Garage
Not sure whether you need the TL or the 5000TLX? Send us your vehicle details and our team will help you compare lift point spacing and capacity. We’re here before and after your order.
Order the 5000TLX Today
The 5000TLX is a proven, powerful, and portable lift for longer cars. Learn more on the official QuickJack website, or explore our full car lifts collection.
Related products
Atlas 6MR Portable Mid-Rise 6000 lb Capacity Scissor Lift
Atlas 6MR Portable Mid-Rise 6000 lb Capacity Scissor Lift The Atlas® 6MR is a free standing 6,000 lb. capacity portable scissor lift. The 6MR is the perfect lift for body shops and wheel service specialists that need extra lifting height. This portable lift easily raises a 6,000 LB. car or truck to
Atlas 6PL Open Center Low Rise 6000 lb Capacity Scissor Lift
Atlas 6PL Open Center Low Rise 6000 lb Capacity Scissor Lift The Atlas® 6PL 6,000 lb. capacity low rise lift is ideal for quick service work situations involving tire and brake work.The open center design of the 6PL low rise lift also allows easier access to the underside of any vehicle being lifted
BendPak LR-10000 10000 lb Capacity Low-Rise Lift
BendPak LR-10000 10000 lb Capacity Low-Rise Lift BendPak’s 10,000-lb. capacity LR-10000 low-rise lift is your solution for quick service and increased productivity when servicing today’s passenger cars and light trucks. From tire and brake service to vehicle detailing and body repair, a wide variety
BendPak SP-7XE Car Lift
BendPak SP-7XE Car Lift The SP-7XE is a space-saving, frame engaging lift from BendPak. This high-quality lift features no cross members at all, meaning installation is easier than ever. This lift can easily accommodate most passenger vehicles as well as light trucks, and it comes loaded with pneuma
BendPak SP-7XEF Car Lift
BendPak SP-7XEF Car Lift The SP-7XLF is the flush-mount version of BendPak’s full-rise scissor lift that can lift up to 7,000 lbs. This lift is perfect for a garage with a recessed area of concrete. The lift will practically be invisible. A collapsed SP-7XLF is extremely low-profile, but it can take

Reviews
There are no reviews yet.