Mahle CSP-75 75 Ton Shop Press
$14,549.00
Mahle CSP-75 75 Ton Shop Press The CSP-75 features full capacity side-to-side adjustment, a four way mountable air/hydraulic pump, precision control, quick exhaust, a winch cable for raising and lowering the bolster and an adjustable bolster with six positions and a wide throat.
The Mahle CSP-75 is a 75-ton air/hydraulic shop press built for heavy pressing jobs in truck, fleet, agricultural, and industrial shops. A 50-inch throat, a six-position adjustable bolster with winch, and a ram that travels 32 inches side to side make the CSP-75 a versatile, powerful press for demanding work.
Mahle CSP-75 75 Ton Shop Press
Adjustable bolster with six positions
Four-way mountable pump
Winch cable for raising and lowering the bolster
Gray engineered and built power units
Product Specifications
Capacity 75 Tons (68,039 kg)
Power Source Air/Hydraulic
Stroke 8.8 in (22.2 cm)
Horizontal Ram Travel 32 in (81 cm)
Throat Width 50 in (127 cm)
Inside Throat Depth 8 in (20 cm)
Outside Throat Depth 14 in (25 cm)
Required Air Pressure 120 to 200 psi (8.3 to 13.8 bar)
Adjustment Increments 6 in (15 cm)
Vertical Throat Minimum 9.5 in (24.1 cm)
Vertical Throat Maximum 39.5 in (100.3 cm)
Dimensions (H x W x D) 85 in x 78 in x 44 in (216 cm x 198 cm x 112 cm)
CSP-75 Specifications
- Capacity: 75 tons
- Power source: air/hydraulic
- Stroke: 8.8 inches
- Horizontal ram travel: 32 inches
- Throat width: 50 inches
- Inside throat depth: 8 inches; outside throat depth: 14 inches
- Vertical throat: 9.5 to 39.5 inches
- Bolster adjustment increments: 6 inches (six positions)
- Required air pressure: 120 to 200 psi
- Dimensions (H x W x D): 85 x 78 x 44 inches
CSP-75 Features
- Adjustable bolster with six positions
- Winch cable for raising and lowering the bolster
- Four-way mountable pump
- Gray-engineered and built power units
75 Tons for Heavy Work
Some jobs need serious force. Pressing large bearings, bushings, and gears from heavy-duty truck and equipment components takes more than a light-duty press can deliver. The CSP-75 provides 75 tons of pressing power with air/hydraulic operation, letting technicians handle big jobs efficiently and with control.
Wide Throat and Side-to-Side Ram Travel
A 50-inch throat accommodates large workpieces, and the ram travels 32 inches horizontally. That lets you position the ram over the exact spot you need to press without constantly repositioning heavy parts. It’s a big time saver when working on axles, hubs, and other bulky components.
Six-Position Bolster With Winch
The bolster adjusts in 6-inch increments across six positions, giving a vertical throat range from 9.5 to 39.5 inches. A winch cable raises and lowers the bolster, so one technician can make height changes safely without manhandling a heavy bed.
Flexible Pump Mounting
The four-way mountable pump lets you set up the press to suit your workspace. Mount the pump where it’s most convenient for the operator, keeping controls within easy reach while maintaining a safe position during pressing.
Air/Hydraulic Efficiency
Air/hydraulic operation reduces operator fatigue compared with manual pumping. With shop air between 120 and 200 psi, the CSP-75 builds pressure quickly and consistently, helping technicians complete jobs faster.
Who Should Buy the CSP-75
- Heavy-duty truck and trailer repair shops
- Fleet maintenance facilities
- Agricultural equipment dealers and repair shops
- Construction equipment service centers
- Industrial maintenance departments
- Fabrication and machine shops
Explore more tools in our shop equipment section.
Common Jobs for the CSP-75
- Pressing wheel bearings and races in and out of hubs
- Removing and installing bushings
- Pressing gears and pulleys on and off shafts
- Kingpin and suspension component service
- Straightening bent parts
- Assembling and disassembling heavy components

How to Use the CSP-75 Safely
- Choose the bolster height that fits the workpiece and lock it in place.
- Support the workpiece securely with press plates or proper fixtures.
- Position the ram over the pressing point using the horizontal travel.
- Connect shop air between 120 and 200 psi.
- Apply pressure gradually, watching the workpiece closely.
- Release pressure fully before removing or adjusting the workpiece.
Safety Guidelines
Shop presses store a lot of energy under load. Always wear safety glasses or a face shield and protective gloves. Use proper support plates and adapters so parts can’t shift or slip. Never exceed the CSP-75’s 75-ton capacity, and stand to the side rather than in line with the workpiece when applying force. Keep hands clear of the ram and bolster, and follow Mahle’s operating instructions. Consider using a guard or shield when pressing parts that could fracture.
Maintenance Tips
- Check hydraulic fluid level and look for leaks.
- Inspect air fittings and hoses.
- Check the winch cable for fraying or damage.
- Keep bolster pins and holes clean.
- Inspect the frame for cracks or deformation.
- Keep the ram clean and protected from damage.
Why Bolster Adjustability Matters
Workpieces come in many sizes. A press with a fixed bed limits what you can work on, while the CSP-75’s six-position bolster lets you set the height to suit each job. That flexibility means you can press small bushings and large hubs with the same machine. The winch makes height changes fast and safe, which encourages technicians to use the right setting every time instead of making do with an awkward setup.
Horizontal Ram Travel Saves Time
Moving a heavy workpiece to line it up under the ram can be slow and awkward. With the CSP-75, the ram travels 32 inches across the frame, so you can position the ram over the workpiece instead. That makes it easier to press multiple points on a single component, such as several bushings on a suspension part, without lifting and repositioning it each time. It also reduces strain on technicians and lowers the risk of dropping heavy parts.
Choosing the Right Press Tonnage
Press capacity should match the work you do. Light-duty presses in the 10–20-ton range suit small automotive parts. Mid-range presses around 30–50 tons cover many automotive and light truck tasks. Heavy-duty work on trucks, buses, and equipment often calls for 75 tons or more. The CSP-75 gives heavy-duty shops ample capacity for tough jobs while still providing the control needed for delicate pressing. Choosing a press with headroom above your typical needs helps ensure you’re never under-equipped.
Air/Hydraulic vs. Manual Presses
Manual hydraulic presses rely on the operator to pump, which can be tiring and slow on long strokes or high-force jobs. Air/hydraulic presses like the CSP-75 use shop air to build hydraulic pressure, making pressing faster and less fatiguing. Technicians can focus on watching the workpiece rather than working a pump handle, which improves both safety and productivity.
Using Press Accessories
The right accessories make pressing safer and more effective. Press plates, arbor plates, bearing separators, and pushing adapters help support workpieces and direct force precisely. Choose accessories rated for the forces involved, and inspect them regularly for damage. Ask our team about accessories that pair well with the CSP-75.
Planning Your Shop Layout
The CSP-75 measures 85 inches tall, 78 inches wide, and 44 inches deep. Plan a location with enough room around the press to load large workpieces, operate the pump, and move safely. Make sure the floor is solid and level, and provide a nearby air supply. Good lighting over the work area helps operators see exactly what’s happening during pressing.
A Typical Wheel Bearing Job
A technician brings a heavy-duty hub to the CSP-75 for bearing race replacement. They winch the bolster to the right height, set the hub on press plates so it’s fully supported, and slide the ram over the race. With an appropriately sized driver in place, they apply air/hydraulic pressure gradually until the old race pushes out. After cleaning the bore, they press the new race in the same way, checking that it seats squarely. The wide throat and horizontal ram travel make positioning simple, and the steady pressure gives the technician precise control throughout.


Bushing Replacement
Suspension and frame components often use pressed-in bushings. Replacing them requires solid support and controlled force. The CSP-75 handles bushings of many sizes, and its horizontal travel lets you work on components with several bushings without moving the part repeatedly. Use receiving cups and drivers sized to the bushing, and press slowly to avoid damaging the bore.
Straightening and Fabrication
Beyond bearings and bushings, the CSP-75 is useful for straightening bent brackets, shafts, and other components, and for fabrication tasks that require controlled force. Its 75-ton capacity gives you plenty of power for heavy steel. Always support the workpiece properly and press in small increments, checking progress frequently.
Why Heavy-Duty Shops Choose the CSP-75
Heavy-duty work demands equipment that can keep up. The CSP-75 combines high tonnage with practical features that make daily use easier: a wide throat for large parts, horizontal ram travel for precise positioning, a winch-adjusted bolster for quick height changes, and air/hydraulic operation to reduce fatigue. For truck, fleet, agricultural, and industrial shops, those features translate into faster, safer pressing jobs and less downtime waiting on outside machine shops.
Bringing Work In-House
Many shops send heavy pressing jobs out to machine shops because they lack the equipment. That adds cost and delay. With the CSP-75, those jobs can stay in-house. Bearings, bushings, and other pressed components can be handled the same day, getting vehicles and equipment back in service faster and keeping the revenue in your shop.
Built to Last
A shop press is a long-term investment. The CSP-75’s heavy frame, durable power unit, and practical design are built for years of regular use. With basic maintenance, such as checking hydraulic fluid, inspecting air lines and the winch cable, and keeping the bolster clean, it will remain a reliable workhorse in your shop.
Training Operators
Make sure every operator understands the CSP-75’s controls, bolster adjustment, and safe pressing practices before use. Demonstrate how to support workpieces properly, how to use press plates and adapters, and where to stand during pressing. Post safety guidelines near the press so they’re always visible.
Protecting Workpieces
Controlled pressure helps protect expensive components. Apply force gradually, use drivers and adapters sized to the part, and check alignment often. Careful pressing reduces the risk of cracked housings, damaged bores, or bent shafts.
Agricultural and Construction Equipment
Tractors, combines, loaders, and other heavy machines use large bearings, pins, and bushings that wear out over time. Replacing them often requires more force than smaller presses can provide. The CSP-75’s 75-ton capacity and wide throat make it well suited to these jobs. Dealers and repair shops serving farmers and contractors can complete repairs in-house, reducing downtime during busy seasons when equipment needs to be working.
Fleet Maintenance
Fleet shops service many vehicles with similar components, which means repeated pressing tasks such as hub bearings and suspension bushings. The CSP-75 helps technicians handle that volume efficiently. Air/hydraulic operation reduces fatigue over a long shift, and the horizontal ram travel speeds up work on multi-bushing components.
Industrial Maintenance
Industrial facilities maintain pumps, motors, gearboxes, and conveyors that rely on pressed bearings and couplings. An in-house press like the CSP-75 lets maintenance teams handle these repairs quickly, keeping production lines running and reducing reliance on outside vendors.

Comparing to Smaller Presses
Smaller presses are lighter and cheaper but limited in force and throat size. When a job exceeds their capacity, technicians may be tempted to use unsafe methods. The CSP-75 removes that temptation by providing the capacity and space heavy jobs require. If your shop regularly handles large components, investing in a press of this class is a smart, safe choice.
Setting Up for Success
Before the CSP-75 arrives, choose a location with a solid, level floor and enough room around the press for loading large parts and operating safely. Run an air line that can deliver 120 to 200 psi, and add a quick coupler at a convenient height. Mount the pump on whichever side suits your workflow, using the four-way mounting option. Store press plates, adapters, and drivers on a nearby rack so they’re always within reach. Good lighting and a clear floor around the press help keep every job safe and efficient.
Press Safety Checklist
- Wear eye and face protection and gloves.
- Inspect the press and accessories before each use.
- Lock the bolster at the correct height.
- Support the workpiece fully and squarely.
- Stand to the side, not in line with the workpiece.
- Apply pressure slowly and watch for shifting.
- Release pressure completely before adjusting anything.
What Technicians Appreciate
Technicians often point to the winch-adjusted bolster and the horizontal ram travel as the features that make the CSP-75 so practical. Changing heights and positioning the ram are quick, which keeps jobs moving. The air/hydraulic operation is a welcome relief compared with pumping a manual press, especially on big jobs. Many shops find the CSP-75 becomes one of their most relied-upon tools.
Getting Started
If your shop needs serious pressing power, the CSP-75 is a strong choice. Contact our team to confirm it fits your space and air supply, ask about accessories, and arrange freight delivery.
Getting the Most From Your Investment
A 75-ton press opens up a wide range of work for a shop. To make the most of it, let customers know you can handle heavy pressing jobs in-house. Truck owners, farmers, contractors, and industrial customers often look for shops that can complete bearing, bushing, and pin work quickly. Promoting that capability can bring new business and strengthen relationships with existing customers. Combined with proper training and accessories, the CSP-75 can become a steady contributor to your shop’s revenue and reputation for capable, efficient service.
Why Mahle
Mahle is a respected global name in automotive and heavy-duty components and service equipment. The CSP-75 reflects that heritage with a practical, heavy-duty design focused on the needs of working technicians. Its combination of capacity, adjustability, and air/hydraulic convenience makes it a valuable addition to any heavy-duty service environment, from small independent shops to large fleet facilities.
Whether you’re pressing bearings on a semi-truck hub, replacing bushings on a loader, or straightening a bent bracket, the CSP-75 gives your team the force, space, and control to work safely and efficiently. Its thoughtful design reduces strain, saves time on setup, and helps keep heavy repairs in your own shop. Reach out to our team at Ironside Garage with questions about air requirements, accessories, or delivery, and we will help you get your new press installed and working quickly.
Frequently Asked Questions About the CSP-75
What is the capacity?
75 tons.
How is it powered?
Air/hydraulic, requiring 120 to 200 psi of shop air.
How wide is the throat?
50 inches.
Does the ram move side to side?
Yes, with 32 inches of horizontal travel.
How does the bolster adjust?
Six positions in 6-inch increments, raised and lowered with a winch cable.
What is the stroke?
8.8 inches.
Support From Ironside Garage
Our team can help you choose the right press for your shop and coordinate freight delivery. Contact us with any questions about the CSP-75.
Order the CSP-75 Today
The Mahle CSP-75 is a proven, powerful 75-ton shop press. Learn more on the Mahle Aftermarket website, or explore our car lifts for your heavy-duty bays.
Related products
Atlas SBC990 Large Sandblast Cabinet with Vacuum
Atlas SBC990 Large Sandblast Cabinet with Vacuum The Atlas SBC990 sandblast cabinet has many of the same features of the entry level Atlas® SBC420 blasting cabinet with added interior space and an extra large front/top loading door. That extra work space and larger opening allow the user to blast ev
Flo-Dynamics TS410 ATF Inline Exchanger
Mahle FluidPRO ATX 280 Transmission Fluid Exchange System with Adapters
Mahle FluidPRO ATX 280 Transmission Fluid Exchange System with Adapters The ATX-280 is a new design for the FluidPRO® line, featuring a large Touch display and the adoption of a new graphical interface. This upgrade is easier for the operator and automatically supports any operation of the oil flow
Ranger RS-750DS
Ranger RS-750DS The incredible RS-750DS is made out of rust-free stainless-steel and has a 1,000 lb. weight capacity that can hold some of the biggest car, truck, and SUV parts on the market. This stainless steel 53-gallon capacity spray wash cabinet can rapidly degrease dirty parts, including large

Reviews
There are no reviews yet.