BendPak HD-973P 9,000 and 7,000 Lb. Capacity / Tri-Level Parking Lift / SPECIAL ORDER
$25,295.00
The Easy Triple The HD-973P by BendPak is a four-post parking lift that offers a cost-effective way to triple the capacity of typical parking areas. Our patent-pending design can be used indoors or outdoors, and this lift allows the storage of three vehicles in a single parking space. The upper plat
The BendPak HD-973P is a tri-level, four-post parking lift that stores three vehicles in a single parking space. Its lower deck handles up to 9,000 lbs. and its upper platform up to 7,000 lbs. Shortened columns let the HD-973P fit in lower-ceiling spaces where most triple stackers can’t.
Proprietary design
Shortened height columns allow this car lift to fit in low ceiling spaces where others systems can’t. Although shorter in stature than most tri-level systems, the lower space still yields a full 70 inches of rise.
Independent platforms
Typical multi-level car stackers include a bottom platform that is suspended from the upper platform via chains or cables—both platforms move simultaneously. This tethered operation results in limited spacing options between platforms, as the distance between platforms is fixed.
The HD-973P features independently operated lifting platforms, permitting varied vehicle heights and spacing in either upper or lower parking spaces. Because the platforms do not have to move in unison with one another, you can now lower the bottom platform without disrupting the overhead vehicle being stored. This allows operators to control one platform at a time. Practically speaking, if you only want to swap out the second-level vehicle, you don’t have to lower the top-level vehicle.
Unmatched protection
The patent-pending design of the HD-973P features multi-position safety locks that are spaced just four inches apart. This allows almost unlimited parking height arrangements on either the upper or lower decks. Redundant, anti-fall, spring-loaded safety catches immediately halt downward movement of either platform in the unlikely event of cable failure.
Hydraulic power
A powerful hydraulic cylinder is enclosed underside each platform set and is matched with high-strength lifting cables for simplicity and dependability. The lift can be configured for drive-thru operation, allowing as many as three deep for maximum efficiency and better use of space.
Smarter construction means less cost to you
High-rise parking lifts that can fit three vehicles will inevitably cost more than other lifts. There’s simply more steel involved, and larger lifts require additional engineering, all of which gets incorporated in the cost. The HD-973P offsets much of that extra cost because its smart design requires less steel. The end result is an incredibly efficient parking lift that actually saves buyers thousands of dollars while upholding the industry’s most rigid safety standards.
Weight-displacing base
Specially designed base frames distribute the load, which makes this unique lifting system suitable for installation on virtually any residential or commercial concrete floor. It can even be installed on asphalt when equipped with concrete footers. The HD-973P may be configured as a stand-alone lift or combined into rows of multiple units.
Who should get this parking lift?
Explore the HD-973P if you need to stack three vehicles in a tight space, or if you want the versatility to vary the parking heights of your second and third-level vehicles. The lift’s small footprint and exemplary design makes for an ideal lifting solution in both professional shops and home garages.
Patent Pending – Applied for in the U.S. and Abroad
Features & Specs
- Perfect for parking, storage and service
- 7,000 lb. capacity upper deck
- 9,000 lb. capacity lower deck
- Superstructure features durable powder coat finish
- Perfect for cars, trucks, and SUVs
- Platforms feature full-length aluminum decking
- Rugged welded-steel construction
- Powerful hydraulic cylinders
- Heavy-duty 3/8” lifting cable
- Heavy-duty steel construction
- Wide base-plate for maximum stability
- Heavy-duty steel construction
- Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze
- Integrated hydraulic flow restrictor provides controlled descent in event of hose rupture
- Reliable electric-hydraulic power system
- Runways feature non-skid surface
- Multi-position safety locks in each column
- Automatic safety locks combined with redundant anti-fall devices
- Adjustable lock ladders
- Independent backup slack-cable safety latches
- Push-button pneumatic safety release.
- Padded trip bar with limit switch prevents lower vehicle from making contact with upper platform.
- Simple controls
- Optional drive-thru ramps available
- Optional 4,500-lb. air-hydraulic rolling jacks available
Style
Style: Multi-Level Parking Lift
Top Platform
Lifting Capacity* 7,000 lbs. (3,175 kg)
*Max Capacity / Front Axle 3,500 lbs. (1,588 kg)
*Max Capacity / Rear Axle 3,500 lbs. (1,588 kg)
A – Overall Width 112″ (2,833 mm)
B – Overall Length 242″ (6,141 mm)
C – Height of Columns 161″ (4,093 mm)
D – Drive-thru Clearance 86.5″ (2,201 mm)
E – Maximum Rise 139″ (3,531 mm)
F – Maximum Lifting Height 145″ (3,683 mm)
G – Distance Between Columns 100″ (2,546 mm)
H – Runway Width 19″ (482 mm)
I – Width Between Runways 44.5″ (1,130 mm)
J – Runway Length 188″ (4,788 mm)
Min. Wheelbase @ rated Capacity1 135″ (3,429 mm)
Min.
Wheelbase @ 75% Capacity1 115″ (2,921 mm)
Min. Wheelbase @ 50% Capacity1 95″ (2,413 mm)
Min. Wheelbase @ 25% Capacity1 80″ (2,032 mm)
Locking Positions 31
Locking Spacing Every 4″ (102 mm)
Lifting Time to Max. Rise 90 seconds
Motor 220 VAC / 60 Hz / 1 Ph
Bottom Platform
Lifting Capacity* 9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle 4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle 4,500 lbs. (2,041 kg)
A – Overall Width 112″ (2,833 mm)
B – Overall Length 200″ (5,080 mm)
C – Height of Columns 161″ (4,093 mm)
D – Drive-thru Clearance 86.5″ (2,201 mm)
E – Maximum Rise 69.5″ (1,765 mm)
F – Maximum Lifting Height 74.5″ (1,892 mm)
G – Distance Between Columns 100″ (2,546 mm)
H – Runway Width 19″ (482 mm)
I – Width Between Runways 44.5″ (1,130 mm)
J – Runway Length 176″ (4,470 mm)
Min. Wheelbase @ rated Capacity1 125″ (3,175 mm)
Min. Wheelbase @ 75% Capacity1 105″ (2,667 mm)
Min.
Wheelbase @ 50% Capacity1 85″ (2,159 mm)
Min. Wheelbase @ 25% Capacity1 70″ (1,778 mm)
Locking Positions 13
Locking Spacing Every 4″ (102 mm)
Lifting Time to Max. Rise 50 seconds
Motor 220 VAC / 60 Hz / 1 Ph
1The Lift supports less weight than its rated capacity when the vehicle’s wheelbase is shorter; this is because the wheels of such a vehicle are closer to the middle of the Runways, where there is less strength. For example, the maximum weight allowed on the Lift for a vehicle with a wheelbase of 95″ is 50 percent of the Lift’s rated capacity (or 3,500 lbs. when the rated capacity is 7,000 lbs.).
HD-973P at a Glance
- Stores three vehicles in one parking space
- Lower deck capacity: 9,000 lbs.
- Upper platform capacity: 7,000 lbs.
- Independently operated platforms
- Shortened-height columns for lower ceilings
- Full 70 inches of rise in the lower space
- Four-post design for indoor or outdoor use
- Suits sedans, SUVs, and full-size trucks
- Special-order item
Triple Your Parking Capacity
Most parking lifts double capacity by stacking two vehicles. The HD-973P goes further, stacking three. One vehicle parks on the ground, one on the lower deck, and one on the upper platform. For buildings, dealerships, collectors, and parking operators, that’s a dramatic increase in capacity without adding a single square foot of floor space.
Fits Where Other Triple Stackers Can’t
Triple-stacking lifts are useful, but most are too tall for many garages and shops. BendPak designed the HD-973P with shortened columns so it fits in more spaces than other triple stackers. Even with the shorter structure, the lower space still offers a full 70 inches of rise. Always measure your ceiling and vehicles before ordering to confirm fit.
Independent Platforms
Many multi-level stackers hang the lower platform from the upper one with chains or cables, so both move together and the spacing between them is fixed. The HD-973P works differently. Its platforms operate independently, allowing different vehicle heights and spacing on each level. You can lower the bottom platform without disturbing the vehicle on top, and control one platform at a time. If you only need to swap the second-level vehicle, you don’t have to move the top one.

Built for Heavy Vehicles
With 9,000 lbs. of capacity on the lower deck and 7,000 lbs. on the upper platform, the HD-973P handles much more than small cars. Sedans, SUVs, and full-size trucks can all be stored within the rated capacities. Put the heaviest vehicle on the lower deck and lighter vehicles above.
Indoor or Outdoor
The HD-973P can be installed indoors or outdoors, giving property owners flexibility. Outdoor installs work well for parking lots and dealership storage areas, while indoor installs suit garages, collector spaces, and parking structures.

Who Should Buy the HD-973P
- Parking operators who want to triple capacity
- Dealerships storing inventory on limited land
- Residential and mixed-use developers
- Collectors with large garages and many vehicles
- Businesses with shops too low for other triple stackers
Explore more options in our four-post lifts category.
Planning Your Installation
A triple stacker is a significant installation. Measure ceiling height at the exact location, including beams, lights, sprinklers, and garage door tracks. Consider the heights and weights of the vehicles you’ll store on each level. Check the floor or slab condition and any engineering or code requirements. Plan for power, drive aisles, and turning space. Because the HD-973P is a special-order item, allow extra lead time when planning your project.

Using the HD-973P
- Lower the platform you want to load.
- Drive the vehicle onto the platform slowly and center it.
- Set the parking brake and turn off the engine.
- Raise the platform to the desired height and lower onto the locks.
- Repeat for the other platform as needed.
- Park the ground-level vehicle beneath the lower deck.
Safety Guidelines
Never exceed 9,000 lbs. on the lower deck or 7,000 lbs. on the upper platform. Always lower each platform onto its locks before parking beneath it. Allow only trained operators to run the lift, keep people clear during movement, and follow BendPak’s operating manual. Inspect the lift regularly.
Maintenance Tips
- Inspect cables, chains, and sheaves as applicable.
- Check hydraulic components for leaks.
- Confirm locks engage properly on each platform.
- Keep platforms and ramps clean.
- Follow BendPak’s recommended service schedule.
Why Independent Platforms Matter Every Day
Imagine a tethered triple stacker where both platforms move together. To reach the middle vehicle, you might have to move the top vehicle too, or accept a fixed gap between levels that doesn’t suit your vehicles. The HD-973P avoids that. Because each platform is independent, you can set different heights for each level based on the vehicles you store. A tall SUV can go on one level and a low sports car on another, each with the spacing it needs. Retrieving a vehicle on one level doesn’t disturb the others.
That independence saves time for operators and frustration for owners, and it gives you more flexibility in how you use every inch of vertical space.

Dealership Inventory Storage
Dealerships often run short on lot space, especially during busy seasons. The HD-973P lets a dealership store three vehicles where it once stored one. Heavy trucks and SUVs can go on the 9,000 lb. lower deck, with lighter vehicles above. Independent platforms make it easier for staff to pull a specific vehicle for a customer without moving the rest.
Collector Garages
For collectors, the HD-973P can turn one bay into a three-car display. Store the most valuable vehicles on the platforms where they’re out of reach of everyday traffic, and keep a daily driver on the ground. The four-post design supports each vehicle on its tires, which is comfortable for long-term storage.
Parking Operators and Developers
For parking operators and developers, triple stacking can significantly increase revenue or reduce the land needed for parking. The HD-973P brings that capability to spaces with lower ceilings than most triple stackers require, making it a more flexible option for existing structures and new projects alike.
Choosing Platform Heights
Set the lower deck high enough that the ground-level vehicle has comfortable clearance, and the upper platform high enough to clear the vehicle on the lower deck. The 70 inches of rise in the lower space gives room for many vehicles below. Because platforms are independent, you can fine-tune each one. Write down the best settings for your vehicles and post them near the controls.

Lighting and Signage
Good lighting helps drivers line up their vehicles accurately on each level. Clear signs showing the capacity of each platform, height limits, and operating rules help prevent mistakes. In commercial settings, a short training program for operators keeps the system running safely and efficiently.
Long-Term Storage Tips
For vehicles stored on the HD-973P for long periods, keep batteries on maintainers, check tire pressures from time to time, and use drip trays to protect the vehicles below. Periodic checks keep all three vehicles in great condition.
Special-Order Lead Time
The HD-973P is a special-order product. Plan ahead and contact our team early in your project so we can confirm availability, lead time, and freight arrangements. Having your site measured and prepared before delivery helps installation go smoothly.
An Efficient Investment
Compared with building more parking, a triple stacker is a fast and efficient way to add capacity. The HD-973P brings that benefit to a wider range of buildings thanks to its shorter columns and independent platforms. For property owners, dealers, and collectors, it can unlock value from space you already have.
A Typical Day With a Triple Stacker
In a busy facility using the HD-973P, the ground-level space usually holds the vehicle that moves most often. The lower deck holds a vehicle used occasionally, and the upper platform holds long-term storage. When someone needs the middle vehicle, the operator moves the ground-level car, lowers the lower deck, and the vehicle drives off. The top vehicle never moves. At the end of the day, vehicles return to their assigned levels and platforms go back onto their locks. With independent platforms, the whole process is efficient and predictable.
Comparing to Double Stackers
A two-level parking lift doubles capacity, which is often enough for homes. For facilities where every space counts, the HD-973P adds a third level and increases capacity by another 50 percent compared with a double stacker in the same footprint. If your ceiling height allows it, that extra level can make a big difference in how many vehicles you can hold.
Whether you’re managing inventory, running a parking facility, or housing a growing collection, the HD-973P offers a clever way to store more vehicles without building more space.
Contact us to start planning your HD-973P project today.
Frequently Asked Questions About the HD-973P
How many vehicles can the HD-973P store?
Three vehicles in a single parking space.
What are the capacities?
The lower deck holds up to 9,000 lbs. and the upper platform up to 7,000 lbs.
Do the platforms move independently?
Yes. Each platform operates on its own.
Will it fit in a low ceiling?
Its shortened columns fit more spaces than typical triple stackers. Measure your space to confirm.
Can it go outdoors?
Yes. It’s designed for indoor or outdoor installation.
Support From Ironside Garage
Our team can help you check dimensions, plan your project, and coordinate the special order and freight delivery of the HD-973P. Contact us with any questions.
Order the HD-973P Today
The BendPak HD-973P is a proven, powerful way to triple your parking. Learn more on the official BendPak website.
Related products
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable When it’s time to add some much needed versatility and productivity to your professional shop or home garage, your first stop should always be a BendPak car lift. Our 6,000-lb. capacity mid-rise scissor lift is designed to fit nicely into
BendPak MDS-6LPF Car Lift
BendPak P-9000LT Car Lift
BendPak P-9000LTF Car Lift
BendPak SP-7XEF Car Lift
BendPak SP-7XEF Car Lift The SP-7XLF is the flush-mount version of BendPak’s full-rise scissor lift that can lift up to 7,000 lbs. This lift is perfect for a garage with a recessed area of concrete. The lift will practically be invisible. A collapsed SP-7XLF is extremely low-profile, but it can take

Reviews
There are no reviews yet.