BendPak HD-9SW 9,000-lb. Capacity Super Wide Car Lift
$11,995.00
Double-Wide Four-Post Lift to Park Four Vehicles If you need to park up to four vehicles in a space that previously could only fit two, 192” post-to-post clearance is perfect for two of whatever you drive. No more sacrificing the indoor protection of your daily drivers. You know what we mean. You’ve
The BendPak HD-9SW is a 9,000 lb. super-wide four-post parking lift designed to stack trucks, SUVs, and cars safely in a standard-height garage. The BendPak HD-9SW combines a shorter runway for smaller spaces with wide runways, a pneumatic safety release, and backup slack-cable latches.
Dual-hub cable sheaves
We’re prepared for you to park anything up to 9,000 lbs. on this lift. With all that weight onboard, why take chances on the cable sheaves? We only use dual-hub sheaves to reduce friction on the cables and keep your trucks and SUVs safely parked up top for as long as necessary.
Multi-level locking positions
The most important asset of a parking lift is how easily it lets you stack vehicles. With a lock position every few inches, we make it easier to park vehicles, no matter the size of your garage. All locks automatically engage at the same time as the lift rises.
Heavy-duty aircraft cable
This may be a four-post lift, but these cables really were made for large, heavy aircraft. Imagine how safe that makes them for use on cars and trucks. An individual cable has a tensile strength of 14,400 lbs., making the lift capacity of the four cables combined 640% more than the 9,000-lb. certified rating.
Electric-hydraulic power system
The HD-9SW parking lift is easy to lift and lower. The power system never requires maintenance, keeps the runways lifting and lowering evenly and only moves if the locks engage and release simultaneously. The parts and components of your BendPak four-post lift work as one, tied together by one of our world-famous power units.
Large base plates
10” x 12” base plates strike a balance between compactness and stability. They’re so stable, in fact, that some people don’t even bolt them down. That’s when the caster kit comes in handy.
Integrated design
All moving parts and components are tucked away neatly in the lift structure. Anytime you need to perform inspections, just peep around to the inward-facing side of the pillar, and you’ll see everything in there (most likely lubricated and working fine). Internal-running cables and parts are kept safe from adverse weather and environmental hazards.
Low-deck runways
The runways of this parking lift feature a low-profile rise of only 4.5″. That’s essential for getting low-stance vehicles safely up on the lift.
Longer approach ramps
To get your low ground-clearance vehicles on top, we provide extended approach ramps. This makes it safe and quick to load them up, while your bottom-level vehicle can glide effortlessly underneath.
Automatic safety locks
Auto-locking safety locks are spring-activated, so they don’t rely on electrical or hydraulic wiring to work. They simply click into place when the parking lift runway passes the lock position. You can hear all four engage simultaneously as the lift climbs. As the lift descends, the locks will release together, ensuring safe, level operation at all times.
Cable slack detection
A secondary slack-cable detection system cuts operations when slack is detected. Most likely, a cable is not rolling over the hub properly, which makes one or both of the ramps uneven. The four-post lift will shut down before the situation gets out of control. More than likely, this will never happen for as long as you own and properly maintain your BendPak.
Choose tall and wide
For many of our customers, garage space isn’t an issue, and the need to park big, heavy vehicles is all that matters. That’s why we offer a super-sized version of this parking lift series, the HD-9SWX. This lift has an 82” rise (12” higher than the standard version) and 188″ runways, (two feet longer than the standard). It generously accommodates large trucks and SUVs side-by-side. The HD-9SWX is ideal for homeowners and shops that require ample headroom and enough runway clearance for long-wheelbase vehicles.
Features & Specs
- Standard rise
- Shorter runway for smaller spaces
- Runways accommodate wide or narrow vehicles
- Runways include rail kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Oversized sheave diameter reduces cable fatigue
- High-speed lifting
- Features heavy-duty 3/8″ aircraft cable
- Rugged 1.25″ roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Runways feature non-skid surface
- Push-button pneumatic safety release
- Independent backup slack-cable safety latches
- Inside runways adjust for different tread widths
- Customizable power unit location
- Removable approach ramps for additional drive-under clearance
- Optional drive-thru ramps available
- Optional drip trays available
- Optional solid deck available to increase storage capacity
- Optional 4,500-lb. air / hydraulic rolling jacks available
Style
Capacity
Why the BendPak HD-9SW Suits Trucks and SUVs
Full-size trucks and SUVs are heavy and wide. Parking one on a standard four-post lift can feel tight, and many lifts aren’t rated for the weight. The BendPak HD-9SW handles up to 9,000 lbs. and gives wider vehicles more room between the columns. Dual-hub cable sheaves reduce friction on the cables, helping keep heavy vehicles safely parked up top for as long as you need.
Lock Positions Every Few Inches
A parking lift is only as useful as its ability to stack vehicles at the right height. The BendPak HD-9SW has a lock position every few inches in each column, with adjustable lock ladders. That makes it easier to fine-tune the height so the vehicle underneath fits comfortably and the vehicle on top stays well clear of the ceiling.
Pneumatic Safety Release and Backup Latches
Lowering the BendPak HD-9SW is simple: raise slightly, press the push-button pneumatic safety release, and lower. Independent backup slack-cable safety latches add another layer of protection, and the lifting cables, locks, and sheaves are fully enclosed.
Non-Skid, Adjustable Runways
The runways feature a non-skid surface for better traction when driving on and off. The inside runway adjusts for different tread widths, so you can match the lift to narrow cars or wide trucks. A rail kit on the runways lets you add accessories later.

Shorter Runway, Standard Rise
The BendPak HD-9SW uses a shorter runway and standard rise, designed for smaller spaces where an extended, high-rise lift won’t fit. If you have a typical residential garage, this layout can make stacked parking possible without major changes.
Flexible Setup
Choose where the power unit goes to suit your garage layout. Removable approach ramps give you more drive-under clearance when the lift is raised, and optional drive-thru ramps let you drive on from one end and off the other.
Popular Accessories for the BendPak HD-9SW
- Drip trays – protect the vehicle parked below from fluid drips
- Solid deck – turns the space between runways into storage
- Rolling air/hydraulic jack – lifts wheels off the runways for brake and suspension work
- Drive-thru ramps – allow drive-on, drive-off use
Ask our team which accessories fit your needs.
Who the BendPak HD-9SW Is For
- Truck and SUV owners who want stacked parking
- Families with one wide vehicle and one daily driver
- Collectors with limited garage length
- Home mechanics who want occasional service access
- Small businesses storing customer vehicles
Compare more options in our four-post lifts category.

Using the BendPak HD-9SW Day to Day
- Lower the runways and set the approach ramps.
- Adjust the inside runway for your vehicle’s track width if needed.
- Drive on slowly, center the vehicle, set the parking brake, and chock the wheels.
- Raise past your chosen lock and lower onto it.
- Confirm all four locks are engaged evenly, then remove the ramps if you need extra clearance.
- Park your second vehicle underneath, using a drip tray if desired.
Safety Reminders
Never exceed 9,000 lbs. Always lower onto the locks before parking or working underneath. Keep people clear while the lift moves. Inspect cables, sheaves, locks, and latches regularly, and follow BendPak’s operating manual.
Planning Your Garage
Measure ceiling height, bay length, and width. Add the height of the vehicle on top to the lock height you’ll use and compare it with your ceiling, garage door, and opener. Plan power for the electric/hydraulic unit and an air supply for the pneumatic release. Our team can help you check the numbers.
Maintenance
- Inspect the 3/8-inch aircraft cables for wear.
- Check sheaves, rollers, and 1.25-inch axles.
- Test the pneumatic release and backup latches.
- Check hydraulic fluid and look for leaks.
- Keep runways clean so the non-skid surface works well.

Turning One Bay Into Two
For many owners, the BendPak HD-9SW is the simplest way to fit two vehicles into one garage bay. Put the vehicle you drive least on top, and keep your daily driver underneath. A drip tray keeps the lower vehicle clean. When you want the top vehicle, back out the lower one, lower the lift, and drive away.
Light Service on a Parking Lift
While the BendPak HD-9SW is built mainly for parking, it’s also handy for oil changes, exhaust checks, and underbody inspections. Add a rolling jack to lift the wheels off the runways and you can handle brakes and suspension too.
BendPak HD-9SW vs. Standard-Width Four-Post Lifts
Standard-width four-post lifts are designed around typical cars. When you drive a wide pickup or a large SUV onto one, the mirrors and doors can come close to the columns, making it harder to get in and out. The BendPak HD-9SW widens the space between columns so those vehicles fit more comfortably. It still handles narrow cars too, thanks to the adjustable inside runway. If your household includes at least one wide vehicle, the extra width can make daily use far less stressful.
BendPak HD-9SW vs. Extended High-Rise Models
BendPak also offers extended, taller versions of its super-wide lifts. Those models suit long-wheelbase vehicles and tall ceilings. The BendPak HD-9SW is the better fit when your garage is shorter or has a standard ceiling, since its shorter runway and standard rise take up less room. Choosing the right version depends on your bay length, ceiling height, and the vehicles you plan to stack.

Protecting the Vehicle Below
When two vehicles share a bay, the one underneath deserves protection. Optional drip trays catch fluids and debris from the vehicle above. An optional solid deck can also provide a full surface between runways for storage. Combined with good lighting and floor markings, these accessories make stacked parking on the BendPak HD-9SW clean and organized.
Built to Last
Heavy-duty 3/8-inch aircraft cables, oversized self-lubricating rollers, oversized sheaves that reduce cable fatigue, internal anti-sway slider blocks, and a single cylinder mounted under the runway all contribute to a lift designed for years of service. With routine inspections, the BendPak HD-9SW is a long-term investment in your garage.
Choosing Your Parking Height
Start by measuring the roof height of the vehicle you’ll park underneath and add a few inches of clearance. That gives you the minimum lock height. Then add the height of the runway structure and the vehicle on top, and compare the total with your ceiling and garage door. Because the BendPak HD-9SW offers lock positions every few inches, you can usually find a setting that works well for both vehicles. Post the chosen lock height near the controls so everyone uses the same one.
Seasonal Storage Made Easy
Many owners use the BendPak HD-9SW to store a seasonal vehicle. A convertible or sports car can sit up top all winter while the daily driver parks below. In summer, a snow-plow truck or winter vehicle can take its place. Switching takes just a few minutes, and both vehicles stay indoors and protected.

Small Business Storage
Detail shops, small dealers, and repair shops often need to hold customer vehicles. The BendPak HD-9SW adds a second parking spot in each bay, keeping cars secure and organized while freeing space for work. Its 9,000 lb. rating means trucks and SUVs aren’t a problem.
Freestanding or Anchored
Follow BendPak’s installation instructions and local requirements for anchoring. Some owners prefer a freestanding setup with optional casters so the lift can be repositioned; others anchor for maximum stability. Our team can explain the options and what your space needs.
Getting Comfortable
Practice a few times with an empty lift, then with a familiar vehicle. Raise in small steps, listen for each lock, and watch how the pneumatic release works. Within a few uses, stacking vehicles on the BendPak HD-9SW becomes quick and routine, and your garage gains a whole extra parking space.
Why Owners Choose This Lift
Owners often pick the BendPak HD-9SW because it solves two problems at once: not enough parking and vehicles that are too wide for ordinary lifts. They appreciate the room between the columns, the fine lock adjustments, and the peace of mind from enclosed cables and backup latches. Many also say the lift made their garage feel bigger, since two vehicles now fit where one used to sit, leaving the rest of the space free for tools, bikes, and projects.
If you’ve been looking for a dependable way to stack a truck or SUV with another vehicle, the BendPak HD-9SW is well worth considering for your garage.
Contact our team with your garage measurements and vehicle sizes, and we will help you confirm that the BendPak HD-9SW is the right lift for your space and plans.
Frequently Asked Questions About the BendPak HD-9SW
What is the capacity?
The BendPak HD-9SW is rated for 9,000 lbs.
Is it good for trucks?
Yes. Its capacity and super-wide layout suit many full-size trucks and SUVs.
How do I release the locks?
Use the push-button pneumatic safety release after raising the lift slightly.
Can the runway width be adjusted?
Yes. The inside runway adjusts for different tread widths.
Can I store things between the runways?
Yes, with the optional solid deck.
Support From Ironside Garage
Our team can help you choose the right super-wide lift, confirm fit, and coordinate freight delivery. Contact us with any questions about the BendPak HD-9SW.
Order the BendPak HD-9SW Today
The BendPak HD-9SW is a proven, powerful four-post lift for stacking wide vehicles. Learn more on the official BendPak website, or browse our full car lifts collection.
Related products
Atlas 6PL Open Center Low Rise 6000 lb Capacity Scissor Lift
Atlas 6PL Open Center Low Rise 6000 lb Capacity Scissor Lift The Atlas® 6PL 6,000 lb. capacity low rise lift is ideal for quick service work situations involving tire and brake work.The open center design of the 6PL low rise lift also allows easier access to the underside of any vehicle being lifted
Atlas FM9SL In Ground Full Rise 9000 lbs Capacity Scissor Lift
BendPak MD-6XP Car Lift
BendPak MDS-6LP Car Lift
BendPak MDS-6LP Car Lift The MDS-6LP sports an open-center design which makes it one of the best options in terms of convenience and work productivity. This lift can handle vehicles weighing up to 6,000 lbs. BendPak has crafted this lift for home garages, full-service shops, quick-lube pits, and rea
BendPak SP-7XE Car Lift
BendPak SP-7XE Car Lift The SP-7XE is a space-saving, frame engaging lift from BendPak. This high-quality lift features no cross members at all, meaning installation is easier than ever. This lift can easily accommodate most passenger vehicles as well as light trucks, and it comes loaded with pneuma
BendPak SP-7XEF Car Lift
BendPak SP-7XEF Car Lift The SP-7XLF is the flush-mount version of BendPak’s full-rise scissor lift that can lift up to 7,000 lbs. This lift is perfect for a garage with a recessed area of concrete. The lift will practically be invisible. A collapsed SP-7XLF is extremely low-profile, but it can take
Dannmar DLR-6P Car Lift
Dannmar DLR-6P Car Lift The DLR-6P is a high-quality low-rise lift from Dannmar that helps you move along on wheels! Its high-density roller wheels are the secret to how the DLR-6P is such a convenient portable low-rise lift. With a mobile lift you’ll gain the ability to easily relocate your lift wi

Reviews
There are no reviews yet.