16AP

$25,495.00

Experience unparalleled direct-drive lifting performance with the 16AP two-post lift. Engineered with cutting-edge technology and constructed from top-grade materials, the 16AP sets a new standard in lifting solutions. Designed for vehicles weighing up to 16,000 lbs., it offers exceptional lifting p

SKU: IRG0191 Categories: ,
Description

The 16AP Two Post Lift is a professional-grade two post lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the 16AP Two Post Lift, along with setup tips, maintenance advice and answers to common questions.

16AP Two Post Lift Features and Specifications

BendPak’s 16AP Series, renowned for its heavy-duty fleet service, airport maintenance, and emergency vehicle management capabilities, stands out with its impressive 16,000-pound lifting capacity. Equipped with long-reaching telescoping arms and a diverse array of lifting adapters, this Super-Duty AP Series seamlessly accommodates virtually every chassis configuration, making it an invaluable addition to any fleet operation.

The 16AP Series offers oversize dimensions and enhanced capabilities that surpass traditional two-post lifts. These lifts can handle more weight, reach higher, extend farther, and provide unmatched vehicle-supporting stability. Featuring fewer moving parts, they are less prone to wear and tear, easier to maintain, and more cost-effective to operate, translating to significant cost savings. Increased uptime ensures more efficiency and free time.

Designed to safely accommodate large commercial trucks and effortlessly lift long, awkward vehicles, the Super-Duty AP Series excels in handling heavy fleet tasks. Key features include generously spaced columns for easier entry and exit and rugged, far-reaching arms that enhance lifting point coverage for greater stability. Ergonomic operator controls ensure simple and safe operation, boosting productivity and profitability.

Setting New Standards with ASARS

BendPak’s patented Automatic Swing Arm Restraint System revolutionizes safety by eliminating unplanned movement. With over 2000 pounds of load-holding force and a full 360-degree grip, ASARS ensures secure arm positioning during vehicle service. Its quick-release lever further enhances operation, providing unmatched stability and control.

Enhanced Accessibility with Low-Proâ„¢ Swing Arms

Navigate low-profile vehicles effortlessly with BendPak’s exclusive Low-Pro swing arms. Featuring telescoping channels and dropped-end pad receivers, these arms provide improved access to hard-to-reach lift points while minimizing the risk of damage. Combined with stackable adapters and two-stagespin-up screw pads, they deliver precise and safe vehicle support for any task.

Revolutionary and patented swing arms are specifically tailored for varying vehicle lifting points. Unlike traditional two-post lift arms, AP arms retract shorter and extend farther; offering lift operators a myriad of lift arm positioning options ― it’s like having the best of all worlds.

The Future is Triple-Telescoping

The innovative three-stage arms achieve more telescoping movement due to their patented nesting feature that results in greater retraction and farther reach. Inner sliding arm movement is no longer impeded by arm end plates, tube closeouts, or even the arm pivot pin itself. The inner tubes retract fully through the back of the arm assembly end even beyond the arm pin, resulting in more achievable retraction and extension.

Industry-Leading Safety Features

Experience peace of mind with BendPak’s automatic safety lock system, engaging seamlessly during lift rising operations and offering a single-point release for effortless descent. Prioritize safety with BendPak’s commitment to industry-leading safety features, ensuring a streamlined workflow and optimal protection for both operators and vehicles.

Unmatched Versatility with Bi-Metricâ„¢ Swing Arms

BendPak’s exclusive Bi-Metric swing arms offer unparalleled flexibility, allowing for customized lift configurations without the need for arm switching. Whether loading vehicles symmetrically or asymmetrically, this 2-in-1 design streamlines vehicle servicing, making it faster and safer than ever before with the 16AP in your shop.

Features

  • Durable powder coat finish
  • Expandable top beam accommodates wide or narrow drive-thru configurations
  • Double-telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Exclusive Bi-Metricâ„¢ arm design for more versatile arm positioning
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Electric / hydraulic HVLP power system
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Automatic arm restraints withstand over 2000-pounds of side force
  • Oversized cable sheave diameter reduces cable fatigue

Specs

Max. Lifting capacity 16,000 lbs. / 7,257 kg
A – Underlock Clearance 76 in. / 1,930 mm
B1 – Max. Lifting Height (Top Lock) 82.25 in. / 2,089 mm
B2 – Max Rise 82.75 in. / 2,102 mm
C – Max. Lifting Height
w/ Adapters
89.75 in. / 2,280 mm
D – Min. Height w/ Pad 7.75 in. / 195 mm
E – Overall Height 169 in. / 4,294 mm
F – Overall Width 168 in. / 4,267 mm
G – Width, Outside Posts 149 in. / 3,785 mm
H – Width, Inside Posts 126 in. / 3,199 mm
I – Width, Drive-Thru 107.75 in. / 2,740 mm
J – Floor to Top Switch 163 in. / 4,128 mm
K – Lift Arm Reach 36 in. / 931 mm (min)
65 in. / 1,651 mm (max)
L – Base Plate Width 28 in. / 710 mm
M – Post to Base Plate 9.5 in. / 241 mm
Max. load per Lift Arm 4,000 lbs. / 2,268 kg
Motor 220 VAC, 60 Hz, 1 Phase
Sound <70 dB

1) Lifting Height w/Pad is maximum lifting height with Pads adjusted to the lowest setting and no adapter(s). Maximum Lifting Height is maximum lifting height with Pads adjusted to high setting and with both tall and medium Adapters installed. 2) Special voltages available upon request. 3) Lift Arms measured from the pivot center to the end of the Lift Arm. Specifications subject to change without notice.

16AP Two Post Lift Photos

16AP Two Post Lift two post lift16AP Two Post Lift two post lift view 216AP Two Post Lift two post lift view 316AP Two Post Lift two post lift view 4

16AP Two Post Lift at a Glance

  • The 16AP Two Post Lift is built for daily professional use.
  • The 16AP Two Post Lift is backed by manufacturer support and documentation.

Key Highlights of the 16AP Two Post Lift

Here is a quick summary of what stands out on this two post lift:

  • Setting New Standards with ASARS
  • Enhanced Accessibility with Low-Proâ„¢ Swing Arms
  • The Future is Triple-Telescoping
  • Industry-Leading Safety Features
  • Unmatched Versatility with Bi-Metricâ„¢ Swing Arms

Why Shops Choose the 16AP Two Post Lift

c => `Shop owners pick the ${c.kw} because it turns floor space into productive bay time. A well-built ${c.noun} lets technicians stand upright under the vehicle, reach suspension, exhaust and drivetrain components without creepers, and move from one job to the next faster. Less time on the floor means more billable hours and less fatigue at the end of the day.`

Benefits of a Quality Two Post Lift

Investing in the right two post lift improves productivity, technician comfort and shop safety. Quality equipment also holds its value, keeps maintenance costs predictable and gives customers confidence in the work your team delivers.

Common Uses for the 16AP Two Post Lift

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the 16AP Two Post Lift

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the 16AP Two Post Lift from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the Automotive Lift Institute (ALI).

16AP Two Post Lift FAQs

Do I need special concrete for the 16AP Two Post Lift?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the 16AP Two Post Lift or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.

How is the 16AP Two Post Lift shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the 16AP Two Post Lift come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “16AP”

Your email address will not be published. Required fields are marked *

Shipping & Delivery