6000TLX Portable Car Lift Bundle
$2,225.00
The QuickJack 6000TLX Bundle gives you everything you need for extended-length lifting, secure vehicle support, and smart storage. This complete package includes: 6000TLX Portable Car Lift – 6,000-lb. capacity, 24″ lift height, 76″ frame length Wall Hanger Set – mount your frames vertically for easy
The 6000TLX Bundle is built for longer cars, SUVs, and light trucks. It pairs QuickJack’s extended-length 6000TLX portable lift with a wall hanger set and urethane pinch-weld blocks, so you can lift safely, store neatly, and protect your vehicle’s underbody.
6000TLX Extended-Length Portable Car Lift Bundle
The QuickJack 6000TLX Bundle is the ultimate package for lifting longer vehicles safely, saving garage space, and protecting delicate lift points—all with bundled savings. This kit includes the 6000TLX extended-length portable lift, a wall hanger set for vertical storage, and pinch-weld blocks for maximum unibody protection.
6000TLX Portable Car Lift
QuickJack developed the 6000TLX to solve the problem of vehicles with wide lift points that standard lifts can’t reach. With a 66-inch lift point spread and 76-inch frame length, it’s ideal for long-wheelbase sedans, SUVs, and light-duty trucks. Plus, the upgraded structural reinforcements and redesigned hydraulic system deliver even more reliable, synchronized lifting performance—all at a 6,000-lb. capacity.
Despite the extra reach and strength, the 6000TLX still collapses to just 3 inches tall, allowing for easy use and compact storage. Setup takes minutes, and lifting to full height happens in about 30 seconds.
Wall Hanger Set
Organize your garage the smart way with the included wall hanger set. Designed to hold any QuickJack model securely, these durable steel hangers mount directly into wall studs and allow you to hang your lift frames vertically when not in use. Installation is simple, and they help you keep your garage floor clear without heavy lifting or complicated storage racks.
Pinch-Weld Blocks Set
Protect your investment and your vehicle with the included pinch-weld blocks. These specially designed urethane blocks cradle and protect factory pinch-weld rails, preventing gouging, tearing, and potential body damage. Their cross-cut slot design allows for either lengthwise or crosswise positioning for the best possible fit under unibody vehicles. Weatherproof and oil-resistant, they’re built to last for years of safe, stable lifting.
Why Bundle?
The 6000TLX Bundle saves you money compared to buying components separately, giving you a complete lifting solution ready to use right out of the box. Whether you’re detailing, repairing, or upgrading your vehicle, you’ll be lifting safer, storing smarter, and protecting your ride like a pro from day one.
- Bundled savings vs. purchasing individually
- Complete lifting, storage, and protection solution
- Engineered for home garages, shops, and detailing bays
- Backed by QuickJack quality and innovation
Features
6000TLX Portable Car Lift
- 6,000-lb. lifting capacity with 24″ lift height
- Extended 76″ frame for long-wheelbase vehicles
- Automatic safety locks engage at mid-rise and full-rise positions
- Upgraded hydraulic system ensures synchronized lifting
- One-handed pendant control for easy operation
- 3″ lowered height for compact storage and easy vehicle access
- Reinforced cross members and frame geometry for superior durability
- Compatible with QuickJack’s full line of accessories
Wall Hangers
- Sold in sets of two
- Powder-coated black finish
- Universal fit for all QuickJack models
- Over-engineered to 150% of rated capacity for added safety
- Solid-steel construction with sleek laser-cut QuickJack logo
- Mounts directly into wall studs for stable, vertical storage
Pinch-Weld Blocks
- Cross-slotted urethane blocks for safe pinch-weld lifting
- Protects delicate unibody jack points from damage
- Oil-resistant, weatherproof, and chemical resistant
- Position blocks lengthwise or crosswise as needed
- Single-piece construction for maximum durability
- Sold in sets of 4
Bundle Benefits
- Save compared to buying items separately
- Complete lifting, storage, and support solution in one package
- Perfect for home garages, detailing shops, and light repair bays
- Protects your lift, your vehicle, and your workspace
Specs

Lifting capacity
Lowered height
Lifting height
Lift point spread
Frame dimensions (ea.)
Other specs
79.5″ (L) x 15.25″ (W) x 5″ (H)
(2,015 mm x 385 mm x 129 mm)
Pinch-Weld Blocks
| A – Length: | 4″ (102 mm) |
|---|---|
| B – Width: | 3″ (76 mm) |
| C – Height of block: | 3″ (76 mm) |
| D – Pinch-weld width: | 0.4″ (10 mm) |
| E – Pinch-weld depth: | 0.5″ (13 mm) |
Wall Hangers
| A – Width: | 4.75″ (121 mm) |
|---|---|
| B – Height: | 6.75″ (172 mm) |
| C – Depth: | 2.25″ (57 mm) |
| Weight (ea.): | 1 lbs. (0.5 kg) |
| Shipping weight: | 3 lbs. (1.4 kg) |
What’s Included in the 6000TLX Bundle
- 6000TLX portable car lift – 6,000 lb. capacity, 76-inch frames, 66-inch lift point spread, 3-inch collapsed height
- Wall hanger set – steel hangers that mount into studs and hold the frames upright
- Pinch-weld blocks set – urethane blocks that cradle factory pinch-weld rails
Buying the 6000TLX Bundle costs less than buying each piece on its own, and every part is made to work together.
Why Extended Frames Matter
Standard-length portable lifts work well on compact and mid-size cars. But many sedans, wagons, SUVs, and light trucks have lift points spaced too far apart for short frames. The 6000TLX in the 6000TLX Bundle solves that with 76-inch frames and a 66-inch lift point spread.
That extra reach means you can place the blocks right where your manufacturer recommends, instead of compromising on position. Proper placement makes lifting more stable and protects the body from stress.
Fast, Synchronized Lifting
The 6000TLX features structural reinforcements and a redesigned hydraulic system that lifts both frames together. The vehicle rises evenly and reaches full height in about 30 seconds. Setup only takes a few minutes once the lift is assembled, so you spend your time working, not preparing.
When lowered, the frames are only 3 inches tall. That slim profile slides under most vehicles easily and makes the 6000TLX Bundle simple to store.

Protect Your Pinch Welds
Unibody vehicles often use thin pinch-weld seams as lift points. A hard pad can bend, gouge, or tear them. The pinch-weld blocks in the 6000TLX Bundle have a cross-cut slot that cradles the seam, spreading the load and preventing damage.
You can position the blocks lengthwise or crosswise to fit your vehicle. They’re weatherproof and oil resistant, so they hold up in a working garage for years.
Store It on the Wall
The wall hanger set holds any QuickJack model securely. Mount the hangers into wall studs, then hang each frame vertically when the job is done. Your floor stays open for parking and walking, and the lift is always within reach.
Is the 6000TLX Bundle Right for You?
The 6000TLX Bundle is a strong match if you:
- Own a long-wheelbase sedan, wagon, SUV, or light-duty truck
- Drive a unibody vehicle with pinch-weld lift points
- Have a garage that can’t fit a two-post or four-post lift
- Want a lift you can take to a friend’s house or the track
- Prefer a complete kit instead of buying accessories later
Compare capacities and frame lengths across our portable car lifts to find the best fit for every vehicle you own.

Step-by-Step: Lifting With the 6000TLX Bundle
- Mount the wall hangers into solid studs.
- Assemble the lift and connect the hoses and power unit as described in the manual.
- Park on a flat, level, hard surface and set the parking brake.
- Slide a frame under each side of the vehicle.
- Fit the pinch-weld blocks and line them up with your lift points.
- Lift a few inches, check the blocks, then raise fully and lower onto the safety locks.
Working Safely
Always rest the vehicle on the mechanical safety locks before working underneath. Never exceed the 6,000 lb. rating of the 6000TLX Bundle. Keep children, pets, and bystanders clear while the lift moves. Inspect hoses, fittings, and blocks before every use, and follow the QuickJack operating manual at all times.
Jobs Made Easy by the 6000TLX Bundle
- Seasonal tire swaps and rotations
- Brake pad, rotor, and caliper service
- Oil changes and fluid checks
- Suspension and steering inspections
- Exhaust repairs and upgrades
- Detailing wheel wells and lower panels

Choosing a Location
Set up the 6000TLX Bundle on smooth, level concrete or firm asphalt. Avoid soft ground, gravel, and slopes. Allow room around the vehicle to open doors and move tools, and keep your work area well lit and free of trip hazards.
Maintenance Checklist
- Inspect hydraulic hoses and couplers for wear or leaks.
- Cap the couplers when disconnected to keep dirt out.
- Check the power unit’s fluid level as directed in the manual.
- Wipe oil and grime off the urethane blocks.
- Hang the frames on the wall to keep them dry and protected.
Tips for Getting the Best Results
Find your vehicle’s lift points in the owner’s manual before the first lift and take a photo for reference. Mark the best frame position on the floor with paint or tape. Keep the pinch-weld blocks and any spare parts in one labeled bin near the wall hangers. These small habits make every lift with the 6000TLX Bundle quicker and more consistent.
Remove heavy cargo before lifting, and use wheel chocks when working on one end of the vehicle. Raise slowly the first few inches and look at each contact point before going higher.

6000TLX Bundle vs. Jack and Stands
Jack stands can do the job, but they require lifting each corner separately and placing stands by hand. The 6000TLX Bundle lifts one full side at a time in about 30 seconds and holds the vehicle on built-in safety locks. The center of the vehicle stays open for creepers and drain pans. For anyone who works on their own cars regularly, the upgrade saves time and adds peace of mind.
6000TLX Bundle vs. a Permanent Lift
A post lift needs high ceilings, a strong slab, and permanent floor space. The 6000TLX Bundle needs only a level floor. It lifts high enough for most routine maintenance, stores on the wall, and moves with you if you relocate. That flexibility is why so many home mechanics choose a portable lift.
Why Buy the 6000TLX Bundle as a Bundle?
Many buyers start with only the lift and later realize they need wall storage and pinch-weld protection. The 6000TLX Bundle includes both from the start at a lower combined price. You get a complete, compatible system and avoid extra shipping on separate orders.

Frequently Asked Questions About the 6000TLX Bundle
How much can the 6000TLX Bundle lift?
The 6000TLX lift is rated for 6,000 lbs.
How long are the frames?
The frames are 76 inches long with a 66-inch lift point spread.
How low do the frames go?
They collapse to just 3 inches tall.
How fast does it lift?
The 6000TLX Bundle reaches full height in about 30 seconds.
Do the pinch-weld blocks fit my car?
They can be set lengthwise or crosswise to suit most unibody pinch-weld rails. Check your manual for exact lift points.
Long-Lasting Value
The reinforced frames, durable steel hangers, and weatherproof urethane blocks are made for years of regular use. Treat the 6000TLX Bundle with basic care and it will handle tire swaps, brake jobs, and oil changes for a long time to come.
Expert Help From Ironside Garage
Not sure if the 6000TLX Bundle fits your vehicle? Our team can review your vehicle’s weight and lift point spacing, explain delivery, and suggest accessories. We’re happy to help before and after you order.
Vehicles That Benefit Most From the 6000TLX Bundle
Because of its long frames and wide lift point spread, the 6000TLX Bundle is a natural match for full-size sedans, station wagons, crossovers, mid-size SUVs, minivans, and many light-duty pickups under 6,000 lbs. These vehicles often have lift points spread farther apart than compact cars, which is exactly the gap the extended 6000TLX was designed to close.
If you own several vehicles, the 6000TLX Bundle can often handle the whole household fleet, from a daily commuter to a weekend SUV. Always confirm each vehicle’s weight and lift point locations in its owner’s manual before lifting.
Making the Most of Your Garage Space
Many home garages are short on space. A permanent lift can take over a whole bay, but the 6000TLX Bundle lives on the wall when you’re not using it. Pick a wall near where you’ll park for lifting so you can move the frames quickly. Keep the power unit, hoses, and pinch-weld blocks on a nearby shelf so everything is in one place.
With a clean, organized setup, getting the car in the air takes just a few minutes. That convenience encourages you to stay on top of maintenance instead of putting it off.
Great for Enthusiasts and DIYers
Car enthusiasts love how the 6000TLX Bundle turns weekend projects into simple tasks. Swapping to winter wheels, installing new brake pads, or upgrading suspension parts all become easier when the vehicle is raised evenly and the center is clear. DIY owners also save money on shop labor for routine services they can now handle at home.
Portable When You Need It
Even with its longer frames, the 6000TLX is designed to be moved. You can carry it to a friend’s garage, a club meet, or a second property. The 6000TLX Bundle gives you the same safe, stable lift wherever you set it up on a hard, level surface.
Shop With Confidence
Ironside Garage serves home mechanics and professional shops across the country. When you order the 6000TLX Bundle from us, you get knowledgeable support, clear shipping information, and help choosing accessories. If you have questions at any point, just reach out to our team.
A Quick Recap of the 6000TLX Bundle
To sum up, the 6000TLX Bundle brings together an extended-length 6,000 lb. portable lift, a wall hanger set, and urethane pinch-weld blocks. The 76-inch frames and 66-inch lift point spread reach the lift points on longer vehicles. The 3-inch collapsed height slides under low cars. Full height comes in about 30 seconds. The hangers clear your floor, and the blocks protect your pinch welds.
It’s a complete, practical package for anyone who wants safe, fast access to the underside of a longer vehicle without installing a permanent lift. If you’ve been waiting for a portable lift that truly fits your SUV or long sedan, the 6000TLX Bundle is well worth a close look.
Have a question about fit, capacity, or delivery? Contact Ironside Garage and we’ll help you decide with confidence.
Order the 6000TLX Bundle Today
The 6000TLX Bundle is a proven, powerful, and complete lifting kit for longer vehicles. Learn more about QuickJack on the official QuickJack website, or browse our full car lifts collection for more options.
Related products
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift We’re not just talking a big game; we’re offering the first open-center mid-rise lift ever made. Decades of experience have taught us a thing or two about vehicle lift points. A car lift with longer platforms means you get to lift more vehicle t
BendPak P-9000LT Car Lift
BendPak P-9000LT Car Lift BendPak’s P-9000LT scissor lift can handle up to 9,000 lbs. Basically, it’s a heavier-duty version of their P-6B. They have increased the lift capacity by 30% and still have managed to maintain all the features BendPak fans love: a dual-approach design, open-center access,
BendPak SP-7XEF Car Lift
BendPak SP-7XEF Car Lift The SP-7XLF is the flush-mount version of BendPak’s full-rise scissor lift that can lift up to 7,000 lbs. This lift is perfect for a garage with a recessed area of concrete. The lift will practically be invisible. A collapsed SP-7XLF is extremely low-profile, but it can take
Challenger DX77 7700 lb ALI Certified Scissor Lift
Challenger DX77 7700 lb ALI Certified Scissor Lift Looking for a scissor lift that can easily handle many makes and models while ensuring maximum productivity and safety? Look no further than the DX77. With a robust 7,700 lbs. capacity and a synchronized hydraulic system, this lift can handle many v
Forward Lift 6000MRL 6000 lbs Capacity Mid-Rise Lift
Tuxedo LR-10K-TLPAD 10,000 lbs Commercial Low Rise Pad Lift
The iDEAL LR-10K-TLPAD is a 10,000 lb. low rise, high-performance commercial, vehicle frame contact lift designed for Cars, SUVs, Vans & Trucks. The LR-10K-TLPAD Pad Lift includes the latest in design & safety features including, twin hydraulic cylinders, three locking height positions with dual lat

Reviews
There are no reviews yet.