Atlas 5HP 80 Gallon Commercial Air Compressor
$3,149.00
Atlas 5HP 80 Gallon Commercial Air Compressor The Atlas® Air Force AF8 is the perfect compressor for the 3-4 man auto shop…or for the one man shop that wants to be prepared for future growth. The AF8 is what we recommend for a small business that depends on their air compressor to deliver flawlessly
The Atlas Air Force AF8 is a 5 HP, 80-gallon commercial air compressor built for steady, quiet air in professional shops. Its 2-cylinder, 2-stage pump delivers 20 CFM at 90 PSI and 19 CFM at 175 PSI, with a pressure setting of 145 to 175 PSI. The AF8 comes with a magnetic starter, vibro-isolation pads, a hands-free tank drain extension, a compressor oil drain extension tube, a finned tank inlet tube to reduce water in the tank, and a heavy-duty metal belt guard. The 80-gallon vertical tank is made in the USA.
This guide covers the AF8 specifications, how it works, sizing, installation, maintenance, and common questions. If you are choosing an air supply for your shop equipment, the Atlas AF8 is a dependable choice.
Atlas 5HP 80 Gallon Commercial Air Compressor
Features and Benefits:
2-Stage Pump
5hp, Low RPM Motor
80 Gallon Vertical Tank (Made in the USA)
Air Output 145-175 PSI
Extremely Quiet Operation
Magnetic Starter Included
Set of Vibro-Isolation Pads Included
Hands free tank drain extension
Compressor oil drain extension tube
Finned tank inlet tube for reduced tank water accumulation
Heavy Duty Metal Belt Guard
Electric: 220volt/1phase
Atlas Air Force AF8 Specifications
Motor Running: 5 Horsepower
Pressure Setting: 145-175 PSI
Delivered CFM at 90 PSI: 20
Delivered CFM at 175 PSI: 19
Tank Capacity: 80 Gallons
Compressor Pump: 2 Cylinder, 2-Stage
Air Outlet Size: 1/2″ NPT
Overall Dimensions: L 40″ x W 24″ x H 71″
Motor/Electrical Requirement: 220volt Single Phase, 30 amp breaker required
Shipping Weight: 589 lbs
Atlas AF8 Specifications
- Motor: 5 HP, low RPM
- Pressure setting: 145 to 175 PSI
- Delivered CFM at 90 PSI: 20
- Delivered CFM at 175 PSI: 19
- Tank capacity: 80 gallons, vertical (tank made in the USA)
- Compressor pump: 2-cylinder, 2-stage
- Air outlet size: 1/2″ NPT
- Overall dimensions: 40″ L x 24″ W x 71″ H
- Electrical: 220V, single phase, 30-amp breaker required
- Magnetic starter: included
- Shipping weight: 589 lbs.
Atlas AF8 Features
- 2-stage pump
- 5 HP, low-RPM motor
- 80-gallon vertical tank, made in the USA
- Air output of 145 to 175 PSI
- Extremely quiet operation
- Magnetic starter included
- Set of vibro-isolation pads included
- Hands-free tank drain extension
- Compressor oil drain extension tube
- Finned tank inlet tube for reduced tank water accumulation
- Heavy-duty metal belt guard
How a Two-Stage Compressor Works
A two-stage compressor squeezes air in two steps. In the first stage, a larger cylinder compresses outside air to a middle pressure. In the second stage, a smaller cylinder compresses that air to the final pressure, up to 175 PSI on the AF8. Compressing in two steps is more efficient than reaching high pressure in a single step, and it lets the pump run cooler and work less hard.
The AF8’s finned tank inlet tube helps cool the air before it enters the tank. Cooler air holds less moisture, which reduces the amount of water that collects in the tank and your air lines.
Key Features Explained
2-Cylinder, 2-Stage Pump
The AF8 uses a 2-cylinder, 2-stage pump that delivers 20 CFM at 90 PSI and 19 CFM at 175 PSI. Strong output at high pressure means plenty of air for impact wrenches, tire machines, and other shop tools.
5 HP Low-RPM Motor
The 5 HP motor runs at low RPM. Slower operation reduces wear and noise, contributing to the AF8’s extremely quiet operation.
Magnetic Starter Included
A magnetic starter comes with the AF8. Magnetic starters protect the motor and help manage start-up loads.
80-Gallon Vertical Tank
The 80-gallon vertical tank stores a large reserve of air and takes up less floor space than a horizontal tank. The tank is made in the USA.
Vibro-Isolation Pads
A set of vibro-isolation pads is included to reduce vibration and noise transferred to the floor.
Hands-Free Tank Drain Extension
The hands-free tank drain extension makes it easier to drain condensation from the tank without reaching under the compressor.
Oil Drain Extension Tube
A compressor oil drain extension tube makes oil changes cleaner and easier.
Finned Tank Inlet Tube
The finned tank inlet tube helps cool the air entering the tank, reducing tank water accumulation.
Heavy-Duty Metal Belt Guard
A heavy-duty metal belt guard covers the belt and pulleys for safety.
Sizing a Compressor for Your Shop
Choosing the right compressor comes down to how much air you use and how often. A small home garage may only need a little air for occasional tool use. A professional shop with several technicians running impact guns, tire machines, and sanders needs much more. The AF8’s 2-stage pump and 80-gallon tank make it suited for steady professional use.
Think about future growth too. If you plan to add bays, lifts, or tire equipment, choosing a compressor with extra capacity now can save you from upgrading later.
What Can the AF8 Power?
With 20 CFM at 90 PSI and an 80-gallon tank, the AF8 can run a wide range of shop tools, including:
- Impact wrenches and air ratchets
- Tire changers and wheel balancers
- Air-over-hydraulic jacks and lift locks
- Air sanders, grinders, and cut-off tools
- Paint guns and blow guns
- Air-powered fluid and coolant service equipment
Add up the CFM ratings of tools you expect to run at the same time, and leave some extra capacity so the compressor is not working at its limit all day.


Installation and Power Requirements
The AF8 runs on 220V, single phase power and requires a 30-amp breaker. Have a licensed electrician install the circuit and connect the magnetic starter to meet local electrical codes.
The compressor measures 40 inches long, 24 inches wide, and 71 inches high. Place it on a solid, level concrete floor in a clean, dry, ventilated area, and use the included vibro-isolation pads. Leave space around it for airflow and service. Route the hands-free tank drain extension to a spot where you can drain condensation easily.
Connect the 1/2-inch NPT air outlet to your shop air system with properly rated piping, a shutoff valve, and a filter or water separator. The shipping weight is 589 lbs., so plan for a forklift or pallet jack at delivery.
AF8 Maintenance Tips
- Drain the tank regularly using the hands-free drain extension.
- Check the oil and change it on schedule using the oil drain extension tube.
- Inspect the belt for wear and proper tension.
- Clean or replace the intake filter as needed.
- Keep the pump clean so it can cool properly.
- Check for air leaks in fittings and lines.
- Keep the belt guard in place.
Follow the Atlas owner’s manual for maintenance intervals and procedures.
Compressed Air Safety
- Never exceed the tool or hose pressure ratings.
- Wear eye protection when using air tools and blow guns.
- Do not point compressed air at people or use it to clean skin or clothing.
- Shut off and drain pressure before servicing the compressor or air lines.
- Keep the belt guard in place at all times.
- Have all electrical work done by a qualified electrician.
OSHA’s hand and power tools resources cover safe use of pneumatic tools and compressed air in the workplace.
Saving Energy With Compressed Air
Compressed air is one of the most expensive forms of energy in a shop. Leaks, oversized pressure settings, and running the compressor when no one is working all waste power. Fix leaks quickly, set pressure only as high as your tools need, and turn the compressor off at the end of the day. The U.S. Department of Energy’s compressed air resources offer more tips for efficient systems.
Understanding the Pressure Setting
The AF8 has a pressure setting of 145 to 175 PSI. The pressure switch starts the compressor when tank pressure drops to the lower setting and stops it when the tank reaches the upper setting. Running the tank up to 175 PSI stores more air in the 80-gallon tank, so the compressor cycles less often and tools have a bigger reserve. Use a regulator at each drop to set the pressure your tools need, usually around 90 PSI for most air tools.
Why CFM at 90 PSI Matters
Most air tools list their air use in CFM at 90 PSI. The AF8 delivers 20 CFM at 90 PSI, which is the number to compare with your tools. It still delivers 19 CFM at the full 175 PSI, showing that the 2-stage pump keeps strong output even at high pressure.


Setting Up a Shop Air System
A good compressor works best with a well-planned air system. Run main lines sized for the flow you need, slope them slightly so water drains toward drop legs, and add drains at low points. Install a filter, regulator, and lubricator where tools need them. A refrigerated air dryer can remove even more moisture for paint work. With the AF8’s finned tank inlet tube and easy tank drain extension doing their part, a clean, dry air system protects your tools and gives better results.
Understanding the Lifetime Cost
The purchase price is only part of what a compressor costs. Electricity, oil, belts, filters, and repairs add up over the years. A compressor that runs at low RPM and stays cool tends to last longer and cost less to maintain. The AF8’s 2-stage pump, low-RPM motor, and easy-service features like the oil drain extension tube and hands-free tank drain help keep ownership costs down.
Who Should Buy the Atlas AF8?
- Automotive repair shops
- Tire and wheel service centers
- Collision and body shops
- Fleet maintenance garages
- Fabrication and welding shops
- Serious hobbyists with large home garages
If you are building out new bays, our car lifts pair well with a reliable shop air supply.
Vertical vs. Horizontal Tanks
Air compressors come with vertical or horizontal tanks. A vertical tank like the AF8’s 80-gallon tank stands upright, so it takes up much less floor space. That makes vertical compressors popular in shops where every square foot matters. Horizontal tanks sit lower and can fit under shelves or mezzanines, but they need more floor area. For most automotive shops, a vertical 80-gallon tank offers a good balance of storage and footprint.
Two-Stage vs. Single-Stage Compressors
Single-stage compressors compress air in one step and are common on smaller units. They work well for light or occasional use but usually top out at lower pressures. Two-stage compressors like the AF8 compress air in two steps, reach higher pressures, and handle steady professional use better. The result is more air stored in the tank, cooler running, and longer pump life. If your shop runs air tools throughout the day, a two-stage compressor is usually the better choice.
Controlling Moisture in Your Air
Compressing air squeezes moisture out of it, and that water ends up in the tank and air lines. Too much water can rust the tank, damage tools, and ruin paint jobs. The AF8 helps in two ways. Its finned tank inlet tube cools the air before it enters the tank, reducing water buildup, and its hands-free tank drain extension makes it easy to drain condensation regularly. For the best results, drain the tank daily and add a water separator or air dryer to your air system.


Choosing the Right Location
Where you put the compressor affects how well it runs. Choose a clean, dry, well-ventilated spot away from dust, paint overspray, and heat sources. Cool, clean intake air helps the pump run cooler and deliver drier air. Many shops place the compressor in a separate room or corner to reduce noise in the work area, with a short main line feeding the shop. Make sure there is room to reach the oil fill, drain extensions, belt guard, and electrical connections for service.
Quiet Operation
Noise matters in a busy shop. A loud compressor makes it harder to talk with customers and coworkers and adds to fatigue over a long day. The AF8 is built for extremely quiet operation thanks to its low-RPM motor and 2-stage pump, and its vibro-isolation pads reduce vibration through the floor.
Planning for Future Growth
Many shops buy a compressor for today’s needs and then outgrow it as they add bays, technicians, and air-powered equipment. Before you order, think about where your shop is headed. List the tools you use now and the equipment you may add, such as another tire machine, a second lift with air locks, or a paint area. If your future demand fits within the AF8’s 20 CFM at 90 PSI, it can serve you for years. If you expect much higher demand, plan your air system so a second compressor can be added later.
Getting the Most From Your AF8
Small habits make a big difference in compressor life. Drain the tank at the end of every day. Check the oil level each week and change it on schedule. Look over the belt and belt guard regularly. Listen for air leaks after hours, when the shop is quiet, and fix them right away. Keep the area around the compressor clean so it can breathe. With simple, steady care, the AF8 will keep delivering quiet, dependable air to your shop.
Before you order, confirm that you have 220V single phase power and room for a 30-amp breaker, and choose a clean, ventilated location. A little planning makes installation quick.
Oil Changes Made Easy
Oil-lubricated compressors last longer when their oil is kept clean and at the right level. The AF8’s compressor oil drain extension tube routes old oil away from the pump so it can drain neatly into a pan. That makes oil changes faster and cleaner, which means they are more likely to be done on time. Use the oil type and change interval listed in the Atlas owner’s manual, and dispose of used oil properly.
Frequently Asked Questions About the AF8
How much air does the AF8 deliver?
It delivers 20 CFM at 90 PSI and 19 CFM at 175 PSI.
What is the pressure setting?
The pressure setting is 145 to 175 PSI.
How big is the tank?
It has an 80-gallon vertical tank made in the USA.
What power does it need?
It requires 220V single phase power and a 30-amp breaker.
Is a magnetic starter included?
Yes. A magnetic starter is included.
What kind of pump does it have?
It has a 2-cylinder, 2-stage pump.
What size is the air outlet?
The air outlet is 1/2″ NPT.
How big is the AF8?
It measures 40 inches long, 24 inches wide, and 71 inches high.
What is the shipping weight?
The shipping weight is 589 lbs.
Is it quiet?
Yes. The low-RPM motor and 2-stage pump provide extremely quiet operation.
Order the Atlas AF8 Today
The Atlas Air Force AF8 5 HP, 80-gallon commercial air compressor gives your shop 20 CFM at 90 PSI, a 2-stage pump, a magnetic starter, and helpful extras like vibro-isolation pads and a hands-free tank drain. It is built for quiet, dependable air every day. Contact Ironside Garage with questions about power or installation, and browse our full range of shop equipment.
Related products
Cool Boss CB-28L Portable Evaporative Air Cooler
Cool Boss CB-28L Portable Evaporative Air Cooler The CB-28 is a medium-duty commercial-grade cooler that is well-suited for large industrial space cooling. When temperatures rise and you’re looking for a cost-effective cooling solution, look no further than Cool Boss. The CB-28 evaporative cooler pu
Flo Dynamics TSD650LCD ATF Inline and Dipstick Exchanger
Mahle FluidPRO ATX-3 and Boost Transmission Fluid Exchange System
Mahle FluidPRO ATX-3 and Boost Transmission Fluid Exchange System FluidPRO equipment from MAHLE Service Solutions offers a range of choices in fluid exchange equipment. The ATX+Boost offers technicians fully-automatic operation with precise fluid measurement to maximize efficiency. The added feature
Portacool Apex 1200 Wi-Fi Enabled High Velocity Portable Evaporative Cooler for 1200 sq ft
Portacool Apex 1200 Wi-Fi Enabled High Velocity Portable Evaporative Cooler for 1200 sq ft Meet the Portacool APEX™ 1200—a game-changer for mid-sized spaces demanding serious cooling. Delivering a powerful 4,000 CFMs of airflow that spans up to 40 ft., this unit ensures consistent comfort across 1,2

Reviews
There are no reviews yet.