Atlas Platinum PVL14OF-EXT Alignment Lift + RJ7000 Rolling Jacks ALI Certified Combo

$20,249.00

The Atlas® Platinum PVL14OF-EXT is a four post commercial grade Open-Front Alignment lift designed with the professional shop in mind. This lift has extra long runways and can accommodate a variety of cars, vans, SUVs, trucks, and commercial vehicles. the Open-Front design allows better access to th

SKU: IRG0251 Categories: ,
Description

The Atlas PVL14OF-EXT is a professional-grade alignment combo kit built for shops that need dependable performance every day. Below you will find the full features and specifications of the Atlas PVL14OF-EXT, along with setup tips, maintenance advice and answers to common questions.

Atlas PVL14OF-EXT Features and Specifications

Features and Benefits:

  • ALI Certified Includes PVL14OF-EXT alignment lift & two RJ7000 rolling jacks
  • Heavy Duty, Commercial Grade
  • Open Front Design
  • Lift is Extra Tall, Extra Wide & Super Long
  • Lift has Air Operated Single Point Lock Release (External Air Supply Required – NOT INCLUDED)
  • Steel Approach Ramps Included
  • Built in Slip-Plates
  • Alignment Turntables Included
  • Mounting Hardware Included
  • Jacks are Air Over Hydraulic operated
  • Truck Adapter Set for each Jack Included
  • This part number FREIGHT PREPAID

Atlas® Platinum PVL14OF-EXT Specifications

  • Capacity 14,000 lb.
  • Lifting Height 73 1/4″ (6′ 1 1/4″)
  • Overall Width Of Columns (Without Motor) 140 1/8″ (11′ 8 1/8″)
  • Overall Width Of Columns (With Motor) 148 3/4″ (12′ 4 3/4″)
  • Overall Length With Approach Ramp 272 1/8″ (22′ 8 1/8″)
  • Length Between Columns 207″ (17′ 3″)
  • Runway Length 223 1/2″ (18′ 7 1/2″)
  • Runway Width 20″
  • Thickness Of Runway 7″
  • Width Between Runways 42 3/4″ (w/ Rail 39 1/4″)
  • Outside Runway To Outside Runway 83 1/8″ (6′ 11 1/8″)
  • Clearance Under Runways 66 1/4″ (5′ 6 1/4″)
  • Clearance Between Columns 116 3/8″ (9′ 8 3/8″)
  • Height Of Columns 92 1/2″ (7′ 8 1/2″) Rear/109 1/4″ (9′ 1 1/4″) Front
  • Maximum Wheel Base 203″ (16′ 11″)
  • Drive Thru 94 1/2″ (7′ 10 1/2″)
  • Air Requirement 85-115 PSI (EXTERNAL AIR SUPPLY REQUIRED)
  • Motor/Electrical Requirement 220 volt single (1) phase. (A 30 amp breaker is recommended)
  • Oil Requirement 3-5 Gallons AW32/AW46 (NOT INCLUDED)
  • Shipping Weight 4,462 LBS.
  • Requires a minimum of 6″ of concrete with a 3000 psi. rating

 

The Atlas® Platinum RJ7000 Specifications:

  • Minimum Width: 36″
  • Maximum Width: 45 1/2″
  • Distance Between Runway Capability: 36″ – 45″
  • Minimum Lifting Height: 12 1/2″
  • Maximum Lifting Height (w/ Adapters): 27 1/2″
  • Double Screw-Up Adapter Pad 1 1/2″ – 4″

Atlas PVL14OF-EXT Photos

Atlas PVL14OF-EXT alignment combo kitAtlas PVL14OF-EXT alignment combo kit view 2Atlas PVL14OF-EXT alignment combo kit view 3Atlas PVL14OF-EXT alignment combo kit view 4

Key Highlights of the Atlas PVL14OF-EXT

Here is a quick summary of what stands out on this alignment combo kit:

  • Features and Benefits:
  • ALI Certified Includes PVL14OF-EXT alignment lift & two RJ7000 rolling jacks
  • Heavy Duty, Commercial Grade
  • Lift is Extra Tall, Extra Wide & Super Long
  • Lift has Air Operated Single Point Lock Release (External Air Supply Required – NOT INCLUDED)

Why Shops Choose the Atlas PVL14OF-EXT

c => `The ${c.kw} is designed around the things that matter in a working bay: a stable lifting platform, dependable locks, and controls that are simple for every technician to learn. Whether you run a busy repair shop, a dealership service lane or a serious home garage, a quality ${c.noun} pays for itself in speed and comfort.`

Benefits of a Quality Alignment Combo Kit

Reliable equipment is one of the best investments a shop can make. A dependable alignment combo kit cuts down on wasted time, reduces repair costs over the life of the machine and helps your team produce consistent, professional results.

Common Uses for the Atlas PVL14OF-EXT

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the Atlas PVL14OF-EXT

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the Atlas PVL14OF-EXT from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Alignment Combo Kits to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right alignment combo kit for your shop.

For product manuals, technical documentation and manufacturer details, visit the official Atlas website.

Atlas PVL14OF-EXT FAQs

Do I need special concrete for the Atlas PVL14OF-EXT?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Atlas PVL14OF-EXT or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the alignment combo kit correctly, which protects your investment and your technicians.

How is the Atlas PVL14OF-EXT shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the Atlas PVL14OF-EXT come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Choosing the Right Alignment Combo Kit

When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Atlas PVL14OF-EXT is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.

It also pays to think about the future. Choosing a alignment combo kit with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.

What to Expect After You Order

After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.

Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Atlas Platinum PVL14OF-EXT Alignment Lift + RJ7000 Rolling Jacks ALI Certified Combo”

Your email address will not be published. Required fields are marked *

Shipping & Delivery