BendPak HD-7W 7,000-lb. Capacity ALI Certified Short Runways Extra-Wide, Extra-Tall

$6,295.00

Dependable, Light-Duty 7,000-lb. Capacity Four-Post Lift The 7,000-lb. capacity HD-7W is ideal for shops that want the versatility to park sports cars, sedans, light-duty trucks and SUVs in the same structure. There’s even enough side clearance to accommodate larger truck mirrors. Even so, this lift

SKU: IRG0119 Category:
Description

Looking for a reliable four post lift? The BendPak HD-7W delivers the durability, safety and ease of use that busy service bays demand. This page covers the BendPak HD-7W features, specifications, installation planning and care so you can buy with confidence.

BendPak HD-7W Features and Specifications

Dependable design

 

The HD-7W features four stainless steel wire ropes, as well as a lone hydraulic cylinder that remains tucked underneath the runway. This powerful cylinder ensures you get a super-durable design that requires minimal maintenance over time.

 

Dual-hub wire rope sheaves

 

Larger wire rope sheaves prevent undue wear-and-tear on the four-post lift’s axles, wire rope and even the sheaves themselves. Dual-hub and oversized sheaves provide a safer product that lasts longer and costs less to maintain. The larger the sheave, the less friction against the components, so we make every single sheave larger than necessary. Typically speaking, the bigger the lift, the bigger the sheave!

 

Multi-level locking positions

 

Parking and service height is totally up to you. Every few inches, the columns will automatically lock into place; simply lower the runways onto the lock as they move over it. Push-button controls will release all four locks together.

 

Secondary safety locks

 

A secondary lock system acts as a slack-cable device that catches the runways and keeps your vehicle level in case any dangerous cable slack develops. The lift will not be operational until you have a chance to resolve the issue.

 

Heavy-duty aircraft wire rope

 

Extremely powerful stainless steel wire ropes are rated at 14,400 lbs. each. They’re called “aircraft quality” for a reason! The combined rating of these cables is more than 822% of the entire lift’s maximum lifting capacity, and all wire rope is fully enclosed within the lift structure.

 

Electric-hydraulic power system

 

A zero-service power unit is incorporated into the four-post lift structure. Dependable, long-lasting and extremely safe, it’s always close at hand for your convenience.

 

Large base plates

 

10″ x 12″ base plates provide a stable yet minimal footprint for the HD-7W. Your four-post lift is as structurally sound as any car lift ever made.

 

Caster kit

 

A rugged, 4-piece caster kit makes your lift mobile, so you can get it out of the way for other service jobs or to simply park your vehicles in a different park of the garage. Foot-lock casters work with or without a vehicle raised on the runways.

 

Integrated design

 

For your safety and convenience, and to improve the aesthetics of your BendPak lift, the critical lifting components (e.g., airlines, safety latches and wire rope sheaves) are all fully enclosed within the columns of the lift.

 

Low-deck runways

 

Low-profile, 4.5″ high runways make it easy to load vehicles onto the lift. Lower runways mean less time driving up the approach ramps; the result is a safer, easier approach.

 

Longer approach ramps

 

The effectiveness of the lowered runways is bolstered by gentle approach ramps that won’t damage low-riding vehicles. Extended-length approach ramps permit drivers of all experience levels to load vehicles onto the runways without scratching the front ends of low-riding cars.

Features & Specs

  • 7,000-lb. maximum lifting capacity
  • Wide drive-thru with tall lifting height and short runways
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Features heavy-duty 3/8″ aircraft cable
  • Rugged 1.25″ roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Ramps feature non-skid surface
  • Push-button pneumatic safety release
  • Optional 4,500-lb. capacity rolling jack available (Model RJ-45)

Capacity

Lifting Capacity* 7,000 lbs. (3,175 kg)

  • Max Capacity / Front Axle 3,500 lbs. (1,588 kg)
  • Max Capacity / Rear Axle 3,500 lbs. (1,588 kg)

Rise

A – Min. Runway Height: 4.5″ (114 mm)

B – Max. Rise: 82″ (2,083 mm)

C – Max. Lifting Height: 86.5″ (2,197 mm)

Time to Full Rise: 35 seconds

Outside Dimensions

D – Overall Width: 110.25″ (2,800 mm)

E – Outside Length: 174″ (4,420 mm)

F – Overall Length: 200″ (5,080 mm)

G – Height of Columns: 100″ (2,540 mm)

Inside Dimensions

H – Width Between Columns: 100.25″ (2,546 mm)

I – Drive-Thru Clearance: 86.5″ (2,197 mm)

Runways

J – Runway Width: 19″ (483 mm)

K – Length of Runways: 164″ (4,166 mm)

L – Width Between Runways: 37.5″ (953 mm) or 44.375″ (1,127 mm)

M – Runway Centerline: 56.5″ (1,435 mm) or 63.375″ (1,610 mm)

N – Outside Edge of Runways: 75.5″ (1,918 mm) or 82.375″ (2,092 mm)

Minimum Wheelbase

Rated Capacity: 115″ (2,921 mm)

75% Capacity: 100″ (2,540 mm)

50% Capacity: 85″ (2,159 mm)

25% Capacity: 70″ (1,778 mm)

Locking

Locking Positions: 15

Lock Spacing: Every 4″ (102 mm)

Power Unit

Motor: 220 VAC / 60 Hz / 1 Ph

Noise: 45 dB

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

BendPak HD-7W Photos

BendPak HD-7W four post liftBendPak HD-7W four post lift view 2BendPak HD-7W four post lift view 3BendPak HD-7W four post lift view 4

BendPak HD-7W at a Glance

  • The BendPak HD-7W is built for daily professional use.

Key Highlights of the BendPak HD-7W

Here is a quick summary of what stands out on this four post lift:

  • 7,000-lb. maximum lifting capacity
  • Wide drive-thru with tall lifting height and short runways
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway

Why Shops Choose the BendPak HD-7W

c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`

Benefits of a Quality Four Post Lift

Reliable equipment is one of the best investments a shop can make. A dependable four post lift cuts down on wasted time, reduces repair costs over the life of the machine and helps your team produce consistent, professional results.

Common Uses for the BendPak HD-7W

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the BendPak HD-7W

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the BendPak HD-7W from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Four Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right four post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official BendPak website.

BendPak HD-7W FAQs

Do I need special concrete for the BendPak HD-7W?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the BendPak HD-7W or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the four post lift correctly, which protects your investment and your technicians.

How is the BendPak HD-7W shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the BendPak HD-7W come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BendPak HD-7W 7,000-lb. Capacity ALI Certified Short Runways Extra-Wide, Extra-Tall”

Your email address will not be published. Required fields are marked *

Shipping & Delivery