BendPak HD-9 9,000-lb. Capacity ALI Certified Standard Width Car Lift

$5,995.00

Meet One of Our Most Popular and Versatile Lifts A four-post lift requires a serious level of engineering. To reduce strain on the columns and provide ample lifting security at all times, BendPak uses the most durable stainless steel lifting cables, as well as the single hydraulic cylinder, to provi

SKU: IRG0114 Categories: ,
Description

Looking for a reliable four post lift? The BendPak HD-9 delivers the durability, safety and ease of use that busy service bays demand. This page covers the BendPak HD-9 features, specifications, installation planning and care so you can buy with confidence.

BendPak HD-9 Features and Specifications

Dual-hub cable sheaves

 

Dual-hub cable sheaves are more expensive to manufacture, but we’d rather send you home with a quality product than a cheap one. They’re necessary to prevent axles, sheaves and cables from burning out before they should. Our philosophy is that your lift should be the last thing you worry about first thing in the morning.

 

Multi-level locking positions

 

Unique service technicians require unique servicing positions; with the HD-9, you can safely lock your four-post lift at varied heights, so you’re never crouching or reaching uncomfortably to perform auto maintenance. If you’re raising the lift for parking purposes, that variation is going to come in handy, depending on how you stack your vehicles.

 

Heavy-duty aircraft cable

 

Each four-post lift comes with four lifting cables made from superior-grade stainless steel. Each individual cable is rated to handle 14,400 lbs. This makes their combined rating over 640% of the total capacity. These cables are hidden within the post columns for both the safety and overall streamlined look of the lift. No one wants to see a cable dangling on the outside of a lift. Tuck that thing away!

 

Electric-hydraulic power system

 

No need to worry about maintenance on your electric-hydraulic power systems! The controls are all within reach, so you can stop, start and reverse your four-post lift on a dime.

 

Large base plates

 

10″ x 12″ base plates keep your car lift rooted in place for as long as you own it. Make sure the ground is level and you’re good to go!

 

Caster kit

 

Ask us about the 4-piece caster kit that fits all our 9K four-post lifts. They turn your stationary lift into a mobile parking and service station. You can even leave a car on top while you move it!

 

Integrated design

 

All lifting cables, airlines, safety latches and sheaves are routed internally throughout the car lift. This is a crucial safety feature that also adds significantly to your lift’s curb appeal! (That is, if you have it visible from the curb.)

 

Low-deck runways

 

We keep our four-post runways to a low 4.5″, so low-stance chassis can be comfortably driven onto the lift.

 

Longer approach ramps

 

Not only are our runways low, we extend them farther than others in the industry. This better suits the lifting of sports cars and other low-standing vehicles.

 

Automatic safety locks

 

Every BendPak four-post lift is designed with a safety-first mentality. To this end, four locks engage simultaneously as the lift is raised, and a backup locking system catches cable slack in the unlikely event of cable failure.

Features & Specs

 

  • 9,000-lb. maximum lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Freestanding design
  • Perfect for parking, storage and service
  • Runways accommodate narrow and standard vehicles
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Features heavy-duty 3/8″ aircraft cable
  • Rugged 1.25″ roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Runways feature non-skid surface
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Longer approach ramps for low-ground clearance vehicles
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
  • ETL Approved

 

Capacity

Lifting Capacity* 9,000 lbs. (4,082 kg)

  • Max Capacity / Front Axle 4,500 lbs. (2,041 kg)
  • Max Capacity / Rear Axle 4,500 lbs. (2,041 kg)

Rise

A – Min. Runway Height: 4.5″ (114 mm)

B – Max. Rise: 70″ (1,778 mm)

C – Max. Lifting Height: 74.5″ (1,892 mm)

Time to Full Rise: 45 seconds

Outside Dimensions

D – Overall Width: 110.25″ (2,800 mm)

E – Outside Length: 174″ (4,420 mm)

F – Overall Length: 200″ (5,080 mm)

G – Height of Columns: 88″ (2,235 mm)

Inside Dimensions

H – Width Between Columns: 100.25″ (2,546 mm)

I – Drive-Thru Clearance: 86.5″ (2,197 mm)

Runways

J – Runway Width: 19″ (483 mm)

K – Length of Runways: 164″ (4,166 mm)

L – Width Between Runways: 37.5″ (953 mm) or 44.375″ (1,127 mm)

M – Runway Centerline: 56.5″ (1,435 mm) or 63.375″ (1,610 mm)

N – Outside Edge of Runways: 75.5″ (1,918 mm) or 82.375″ (2,092 mm)

Minimum Wheelbase

Rated Capacity: 115″ (2,921 mm)

75% Capacity: 100″ (2,540 mm)

50% Capacity: 85″ (2,159 mm)

25% Capacity: 70″ (1,778 mm)

Locking

Locking Positions: 12

Lock Spacing: Every 4″ (102 mm)

Power Unit

Motor: 220 VAC / 60 Hz / 1 Ph

Noise: 45 dB

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

BendPak HD-9 Photos

BendPak HD-9 four post liftBendPak HD-9 four post lift view 2BendPak HD-9 four post lift view 3BendPak HD-9 four post lift view 4

BendPak HD-9 at a Glance

  • The BendPak HD-9 is built for daily professional use.
  • The BendPak HD-9 is backed by manufacturer support and documentation.

Key Highlights of the BendPak HD-9

Here is a quick summary of what stands out on this four post lift:

  • We keep our four-post runways to a low 4.5″, so low-stance chassis can be comfortably driven onto the lift.
  • 9,000-lb. maximum lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Freestanding design
  • Perfect for parking, storage and service

Why Shops Choose the BendPak HD-9

c => `Shop owners pick the ${c.kw} because it turns floor space into productive bay time. A well-built ${c.noun} lets technicians stand upright under the vehicle, reach suspension, exhaust and drivetrain components without creepers, and move from one job to the next faster. Less time on the floor means more billable hours and less fatigue at the end of the day.`

Benefits of a Quality Four Post Lift

Reliable equipment is one of the best investments a shop can make. A dependable four post lift cuts down on wasted time, reduces repair costs over the life of the machine and helps your team produce consistent, professional results.

Common Uses for the BendPak HD-9

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the BendPak HD-9

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the BendPak HD-9 from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Four Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right four post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official BendPak website.

BendPak HD-9 FAQs

Do I need special concrete for the BendPak HD-9?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the BendPak HD-9 or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the four post lift correctly, which protects your investment and your technicians.

How is the BendPak HD-9 shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the BendPak HD-9 come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BendPak HD-9 9,000-lb. Capacity ALI Certified Standard Width Car Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery