BendPak HD-9SWX 9,000-lb. Capacity Super Wide 82″ Rise Car Stacker Parking Lift

$12,995.00

The Ultimate Extended-Length, High-Rise, Double-Wide Car Lift If you’re looking for a little more lifting height, extended-length runways and a lot less column interference, then our HD-9SWX four-post lift is the answer. This super-wide, extended-length model is designed to transform your garage int

SKU: IRG0333 Categories: ,
Description

The BendPak HD-9SWX is a 9,000 lb. capacity super-wide car stacker with an 82-inch rise. Built as a freestanding four-post parking lift with extra-long ramps and adjustable runways, the BendPak HD-9SWX is made for owners who need tall clearance underneath and room for wide vehicles.

Features & Specs

  • 9,000-lb. maximum lifting capacity
  • Freestanding design
  • Perfect for parking, storage and service
  • Double-wide configuration for quad-vehicle storage
  • Four runways
  • Super-tall rise
  • Extra-long ramp
  • Runways accommodate wide or narrow vehicles
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Oversized sheave diameter reduces cable fatigue
  • High-speed lifting
  • Features heavy-duty 3/8″ aircraft cable
  • Rugged 1.25″ roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Runways feature non-skid surface
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Inside runways adjust for different tread widths
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air / hydraulic rolling jacks available

Capacity

Lifting Capacity*
9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle
4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle
4,500 lbs. (2,041 kg)

Rise

A – Min. Runway Height:
7″ (178 mm)
B – Max. Rise:
82″ (2,083 mm)
C – Max. Lifting Height:
89″ (2,261 mm)
Time to Full Rise:
65 seconds

Outside Dimensions

D – Overall Width:
202″ (5,131 mm)
E – Outside Length:
198″ (5,029 mm)
F – Overall Length:
224″ (5,690 mm)
G – Height of Columns:
102″ (2,591 mm)

Inside Dimensions

H – Width Between Columns:
192″ (4,877 mm)
I – Drive-Thru Clearance:
178″ (4,521 mm)

Runways

J – Runway Width:
19″ (483 mm)
K – Length of Runways:
188″ (4,775 mm)
L – Width Between Runways:
37″ (940 mm) or 42″ (1,067 mm)
M – Runway Centerline:
56″ (1,422 mm) or 61″ (1,549 mm)
N – Outside Edge of Runways:
75″ (1,905 mm) or 80″ (2,032 mm)

Minimum Wheelbase

Rated Capacity:
135″ (3,429 mm)
75% Capacity:
115″ (2,921 mm)
50% Capacity:
95″ (2,413 mm)
25% Capacity:
80″ (2,032 mm)

Locking

Locking Positions:
16
Lock Spacing:
Every 4″ (102 mm)

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB

Shipping

Weight:
2,987-lbs. (1354.9 kg)
Dimensions:
206” x 22” x 40” (5,232 mm x 559 mm x 1,016 mm)

 

BendPak HD-9SWX Features

  • 9,000 lb. maximum lifting capacity
  • 82-inch super-tall rise
  • Freestanding design
  • Extra-long approach ramp for low vehicles
  • Super-wide runways for wide or narrow vehicles; inside runway adjusts for tread width
  • Non-skid runway surface and rail kit for accessories
  • Four heavy-duty 3/8-inch aircraft cables, fully enclosed
  • Multi-position safety locks with adjustable lock ladders
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Electric/hydraulic power with a single cylinder under the runway
  • Oversized rollers and sheaves, 1.25-inch roller axles, anti-sway slider blocks

82 Inches of Clearance Underneath

Tall vehicles need tall clearance. With an 82-inch rise, the BendPak HD-9SWX lets you park SUVs, pickups, and vans underneath a stored vehicle, not just low cars. That makes it one of the most versatile stackers for households and businesses with a mix of vehicle types. It also gives you more headroom when working under the lift for oil changes and inspections.

Super-Wide for Comfortable Parking

The wide stance of the BendPak HD-9SWX leaves more room between the columns, so wide trucks and SUVs fit without tight squeezes. Getting in and out of the top vehicle is easier, and the risk of door dings on the columns drops. The adjustable inside runway lets you match narrower cars too.

Extra-Long Ramp for Low Cars

Sports cars and lowered vehicles benefit from the extra-long approach ramp, which creates a gentler angle onto the runways. That helps protect front lips and undertrays. Removable ramps also give you extra drive-under clearance when the lift is raised.

Parking, Storage, and Service

BendPak lists the BendPak HD-9SWX as perfect for parking, storage, and service. Stack two vehicles in one bay, store a classic or seasonal vehicle long-term, or raise a vehicle to work underneath. Add a rolling jack to lift wheels off the runways for brakes and suspension work.

BendPak HD-9SWX

Freestanding Flexibility

The freestanding design gives you more freedom in placement and future changes. Choose where to mount the power unit to suit your garage layout. Always follow BendPak’s installation instructions and local requirements.

Who the BendPak HD-9SWX Is For

  • Owners stacking a tall SUV or truck underneath another vehicle
  • Collectors with high-ceiling garages or shop buildings
  • Families with a mix of tall and low vehicles
  • Small businesses storing customer or inventory vehicles
  • Home mechanics who want more headroom for service

Compare more options in our four-post lifts category.

How to Use the BendPak HD-9SWX

  1. Lower the runways and position the approach ramps.
  2. Adjust the inside runway for your vehicle’s track width.
  3. Drive on slowly, center the vehicle, set the brake, and chock the wheels.
  4. Raise past the desired lock, then lower onto it.
  5. Check that all four locks are engaged at the same height.
  6. Remove the ramps if needed and park the second vehicle underneath.
  7. To lower, raise slightly, press the pneumatic release, and lower slowly.

Safety Reminders

Never exceed 9,000 lbs. Always lower onto the locks before parking or working underneath. Keep people clear while the lift moves. Inspect cables, sheaves, locks, and slack-cable latches regularly, and follow BendPak’s manual.

Ceiling Height Planning

An 82-inch rise needs a tall space. Add the rise, the runway structure, and the height of the vehicle on top, then compare with your ceiling, beams, lights, garage door, and opener. If you’re installing in a standard-height garage, a standard-rise model may be the better match. Our team can help you run the numbers before you order.

BendPak HD-9SWX front view

Maintenance Checklist

  • Inspect the aircraft cables for fraying or kinks.
  • Check sheaves, rollers, and axles for smooth movement.
  • Test the pneumatic release and backup latches.
  • Confirm the locks engage evenly in all four columns.
  • Check hydraulic fluid and look for leaks.
  • Keep runways clean so the non-skid surface stays effective.

Accessories Worth Adding

  • Drip trays to protect the lower vehicle
  • A solid deck for storage between runways
  • A rolling air/hydraulic jack for wheel-free service
  • Drive-thru ramps for drive-on, drive-off use

Making Use of a Tall Garage

If you have a tall garage, pole barn, or shop, much of the vertical space often goes unused. The BendPak HD-9SWX turns that space into an extra parking spot. With its 82-inch rise, even a full-size SUV can park underneath, which isn’t possible on many standard-rise lifts. For owners with the height to spare, it’s one of the most effective ways to add parking.

BendPak HD-9SWX vs. Standard-Rise Lifts

A standard-rise four-post lift works well when the vehicle below is a low car. But if you want to park an SUV, a pickup, or a van underneath, you need more height. The BendPak HD-9SWX offers an 82-inch rise, which opens up many more combinations of vehicles. The trade-off is that you’ll need a taller ceiling. If your garage has the height, the extra clearance makes the lift much more useful day to day.

Standard-rise models make more sense in lower garages or where the vehicle underneath is always a small car. Our team can help you decide which approach fits your space best.

BendPak HD-9SWX vs. Standard-Width Lifts

Standard-width lifts can feel tight with wide trucks and SUVs, especially when opening doors near the columns. The super-wide layout of the BendPak HD-9SWX gives more breathing room. Combined with the adjustable inside runway, it handles both wide and narrow vehicles comfortably.

BendPak HD-9SWX side view

A Day With the BendPak HD-9SWX

In the morning, the family SUV backs out from under the lift and heads to school or work. Up top, a weekend sports car stays protected from weather, dust, and dings. In the evening, the SUV parks underneath again, with a drip tray catching anything from above. On Saturday, when it’s time for a drive, the SUV moves aside, the lift is lowered with the push-button release, and the sports car rolls down the long ramp. The whole routine takes only a few minutes.

Using the BendPak HD-9SWX for Service Work

The tall rise isn’t just for parking. When you need to work under a vehicle, the BendPak HD-9SWX gives you generous headroom for oil changes, exhaust repairs, and inspections. Add a rolling jack to lift the wheels off the runways, and you can handle brakes, tires, and suspension too. Good lighting under the runways makes every job easier.

Long-Term Vehicle Storage

For long-term storage, a four-post lift is ideal because it supports the vehicle on its tires, just as it sits on the ground. Classics, collector cars, and seasonal vehicles can rest on the BendPak HD-9SWX for months. Keep the battery on a maintainer, check tire pressure occasionally, and use a drip tray to protect the vehicle below.

Business Uses

Small dealerships, detail shops, and storage businesses can use the BendPak HD-9SWX to stack vehicles and increase capacity without expanding their building. The tall rise means taller vehicles can be parked below, giving operators more flexibility in how they arrange inventory or customer vehicles.

Built for Reliability

Enclosed 3/8-inch aircraft cables, oversized self-lubricating rollers, oversized sheaves, rugged 1.25-inch roller axles, anti-sway slider blocks, and backup slack-cable latches all add up to a lift built for years of dependable use. With routine maintenance, the BendPak HD-9SWX will keep stacking vehicles safely for a long time.

BendPak HD-9SWX detail

Choosing the Right Lock Height

Measure the roof height of the vehicle that will park underneath and add a comfortable margin. That’s your minimum lock height. Then add the runway structure and the height of the top vehicle, and make sure the total clears your ceiling, beams, lights, and garage door. With multi-position locks and adjustable lock ladders, the BendPak HD-9SWX lets you fine-tune the setting. Post the chosen height near the controls so every driver uses the same one.

Tips for Smooth Daily Use

  • Mark the floor to help center the lower vehicle.
  • Use a tennis ball or parking aid for the top vehicle’s stopping point.
  • Keep the approach ramps stored neatly when removed.
  • Add LED lighting under the runways.
  • Keep a short inspection checklist near the lift.

Delivery and Installation

The BendPak HD-9SWX ships by freight and is large and heavy. Plan for a clear delivery path, equipment or help to unload, and enough room to assemble the lift. Confirm floor condition, ceiling height, power for the electric/hydraulic unit, and an air supply for the pneumatic release. Our team can help coordinate delivery and answer setup questions.

Why Height and Width Matter Together

Many lifts offer either extra width or extra height, but not both. The BendPak HD-9SWX combines them. That pairing is what makes it so useful for real households, where vehicles come in all shapes and sizes. A wide pickup can sit on top while a tall SUV parks below, or a low sports car can glide up the long ramp while a minivan waits underneath. Few lifts handle that variety as comfortably.

For businesses, the same flexibility means fewer limits on which vehicles can be stacked where, making the most of every bay.

Protecting Your Investment

Vehicles stored on the BendPak HD-9SWX stay off the floor, away from foot traffic, bikes, and car doors. They’re protected from weather when indoors and kept in a stable position on their tires. For collectors and enthusiasts, that protection is one of the biggest reasons to choose a four-post stacker over other storage options. Using drip trays and good lighting keeps both vehicles clean and easy to manage.

BendPak HD-9SWX in use

Growing With Your Needs

Garages change over time. You might add a project car, trade a sedan for an SUV, or start a small business. The BendPak HD-9SWX adapts thanks to its adjustable runways, multi-position locks, tall rise, and freestanding design. Add accessories such as a solid deck or rolling jack later as your needs grow. It’s a lift that can serve you well through many changes in your garage and your life.

Getting Started

Start by measuring your ceiling height, bay length, and bay width, and noting the heights of the vehicles you’d like to stack. Then reach out to our team. We’ll help you confirm that the BendPak HD-9SWX fits, recommend accessories, and arrange freight delivery so you can start using your new parking space quickly.

Comparing Costs

When you compare the BendPak HD-9SWX with other ways to add parking, the value stands out. A garage addition can cost many times more and take months to plan and build. Off-site storage for a collector or seasonal car adds a monthly bill and keeps your vehicle far from home. Parking outside exposes vehicles to sun, rain, hail, and theft. A four-post stacker is a one-time investment that adds a protected parking space inside the garage you already have, with the vehicle always within reach.

For many owners, the lift pays for itself over time through avoided storage fees and reduced weather damage, and through the simple convenience of keeping every vehicle at home.

What Owners Appreciate

Owners of the BendPak HD-9SWX often point to the tall clearance as the feature they value most. Being able to park an SUV underneath changes how useful the lift is every day. They also like the generous width, the gentle ramp for low cars, and the quick push-button release. Together, these features make stacking vehicles feel easy rather than like a chore.

Whether you are stacking family vehicles, storing a collection, or adding service space, the BendPak HD-9SWX gives you the width, height, and strength to do it confidently. It is a dependable lift that makes a tall garage work harder for you every single day, and it is backed by the engineering BendPak is known for.

Send us your ceiling height and vehicle list, and our team will quickly help you confirm that the BendPak HD-9SWX fits your garage.

We are always glad to help.

Frequently Asked Questions About the BendPak HD-9SWX

What is the capacity?

The BendPak HD-9SWX is rated for 9,000 lbs.

How much rise does it have?

It offers an 82-inch rise.

Is it freestanding?

Yes. It has a freestanding design. Follow BendPak’s instructions and local codes.

Can I park an SUV underneath?

The 82-inch rise allows many taller vehicles underneath, depending on your ceiling and the vehicle on top.

How are the locks released?

With a push-button pneumatic safety release.

Can I use it for service work?

Yes. It’s designed for parking, storage, and service. Add a rolling jack for wheel-free work.

Support From Ironside Garage

Our team can help you measure your space, choose accessories, and plan delivery for the BendPak HD-9SWX. Contact us with any questions.

Order the BendPak HD-9SWX Today

The BendPak HD-9SWX is a proven, powerful super-wide car stacker with tall clearance. Learn more on the official BendPak website, or browse our full car lifts collection.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BendPak HD-9SWX 9,000-lb. Capacity Super Wide 82″ Rise Car Stacker Parking Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery