Bendpak PL-12000DP 12,000 Lb. Cap. Parking Lift / Tandem Independent Platforms / Ext. Rise – Long Platforms / SPECIAL ORDER

$23,695.00

PL-12000DP/DPS BendPak’s newest PL-12000DP and PL-12000DPS parking lifts are revolutionary vehicle storage solutions for those challenged with owning more cars and trucks than parking spaces to store them. They can greatly expand the number of cars in a facility without expanding building space. As

SKU: IRG0328 Categories: ,
Description

The BendPak PL-12000DP is a 12,000 lb. total capacity parking lift with two tandem independent platforms, long runways, and an extended 82-inch rise. This special-order BendPak PL-12000DP lets you park four vehicles in the space of two, with each platform lowering on its own.

Two Independent Platforms
Because each platform operates independently, one vehicle can be lowered while the other side remains still. This eliminates the need to “shuffle” vehicles from the half of the lift where vehicles are not being accessed.

Still the Best
For over 50-years, our experience as the world’s premier parking lift manufacturer enables us to deliver optimal solutions for our clients, from the initial problem, design consultation, then ultimately through fabrication, installation, and support. We’re the leading turnkey provider for all your parking lift needs, whether for commercial garages, or residential applications.
The cutting-edge PL-12000 series lifts reflect our continuing commitment to design and deliver innovative vehicle storage solutions that offer only the highest value to our customers. The space-saving design means you can now stack one vehicle above another in the same space typically required for a single parking stall.

With the strength to handle loads up to 6,000 lbs. and a footprint considerably smaller than other mechanical parking systems, they deliver more parking capability space per square inch than any other lift in its class.

Reliable and Safe
A dependable hydraulic drive system provides reliable power that requires very little service and maintenance over time. Tandem drive cylinders, combined with an intelligent hydraulic circuit, provide precise, equalized lifting of the platforms. Our promise to deliver a safe parking lift is the most important commitment we make in order to earn your trust and ensure lock systems and easy to understand operator controls, operators will be pleasantly surprised at how easy they are to safely operate.

Our commitment to quality is unsurpassed. Our dedication to taking your parking challenges to the next level extends well beyond the physical reach of our products. Our advanced yet simple design enables our lifts to perform effortlessly and tirelessly, year after year, with very little maintenance or service required. After all, we can’t expect you to be a parking lift expert – that’s our job. Featuring rugged, welded steel construction, very few moving parts, and a simple fluid power system, the hydro-mechanical PL-12000 series offers the most economical and dependable method of lifting to deliver you many years of trouble-free service.

Performance Guaranteed
We’re so sure that our lifts will out-perform all others; we’re backing that promise with a full five-year warranty. The best warranty is the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability, and reliability.

SPECIFICATIONS

• Dual hydraulic cylinders with heavy-duty galvanized lifting cables
• Multiple locks for multi-height parked settings
• Wide baseplates for maximum stability
• Dual electric-hydraulic power units
• Heavy-duty steel construction
• Front and rear wheel chocks
• 6,000 lb. capacity per side
• Built-in wheel stops
• High-speed lifting
• Tall rise, extended length model – PL-12000DP
• Perfect for cars, light trucks, motorcycles, and ATVs
• Superstructure features durable powder-coat finish
• Full-width platforms to keep bottom vehicles protected
• Lightweight, extended aluminum approach ramps can be easily stowed

Style

Style: Multi-Platform Parking Lift
Model: PL-12000DP
Number of Platforms: 2
Load Capacity per Platform: 6,000 lbs. / 2,722 kg
Total Width: 221.25″ / 5,620 mm
Outside Length: 198″ / 5,029 mm
Total Length: 242.5” / 6,160 mm
Total Height: 130.5” / 3,313 mm
Min. Runway Height: 4.75” / 121 mm
Maximum Rise: 82” / 2,082 mm
Width Between Posts: 211” / 5,362 mm
Width Between Short & Double Posts: 100.25” / 2,546 mm
Width Between Platforms: 29” / 739 mm
Width Between Runways: 35” or 41” / 887 or 1,045 mm
Runway Length: 183” / 4,649 mm
Runway Width: 19” / 482 mm
Drive Thru Height: 80.5” / 2,047 mm
Drive Thru Width: 85” / 2,161 mm
Outside Edge of Runways: 76 or 82” / 1,930 or 2,083 mm
Safety Lock Positions: 6
Power Unit / Motor: 220 VAC, 50/60 Hz, 1 Ph -*Other voltages, including 110V option are available upon request. All specifications subject to revision.

Note: An air supply (minimum of 75 PSI). is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

BendPak PL-12000DP Key Dimensions

  • Total capacity: 12,000 lbs. (6,000 lbs. per platform)
  • Maximum rise: 82 inches; drive-thru height: 80.5 inches
  • Runway length: 183 inches; runway width: 19 inches
  • Width between posts: 211 inches; drive-thru width: 85 inches
  • Width between platforms: 29 inches
  • Width between runways: 35 or 41 inches; outside edge of runways: 76 or 82 inches
  • Total length: 242.5 inches; total height: 130.5 inches
  • Minimum runway height: 4.75 inches
  • Safety lock positions: 6
  • Power: 220 VAC, 50/60 Hz, single phase (other voltages, including 110V, available on request)
  • Air supply of at least 75 PSI required to release the safety locks

What These Numbers Mean for You

An 80.5-inch drive-thru height means many SUVs, pickups, and vans can park under a raised platform. Long 183-inch runways handle long-wheelbase vehicles on top. Two runway spacing options, 35 or 41 inches between runways, let you match the platforms to narrower cars or wider trucks. And with six lock positions, you can set each platform at the height that suits the vehicles above and below.

Tandem Independent Platforms

The two platforms on the BendPak PL-12000DP sit side by side and operate independently. Lower one side to retrieve a vehicle while the other side stays raised. There’s no need to shuffle cars on the half of the lift you aren’t using. For busy households and facilities, that saves time every day.

Planning Your Installation

Because the BendPak PL-12000DP is a large special-order lift, careful planning is essential:

  • Confirm your ceiling clears the 130.5-inch total height.
  • Check that your space fits the 242.5-inch total length and the full width of the posts.
  • Plan a 220V circuit, or request another voltage when ordering.
  • Provide an air supply of at least 75 PSI for the lock release; supplying and maintaining it is the owner’s responsibility.
  • Choose runway spacing based on the vehicles you’ll park on top.

Who Should Buy the BendPak PL-12000DP

  • Homeowners with large garages and four vehicles
  • Collectors needing independent access to each stored car
  • Residential and commercial developers
  • Dealerships storing inventory
  • Hotels and offices with limited parking

Explore more parking options in our car lifts catalog.

BendPak PL-12000DP

How to Use the BendPak PL-12000DP

  1. Lower the platform and set the approach ramp.
  2. Drive onto the runways and stop at the wheel stops.
  3. Set the parking brake and chock the wheels.
  4. Raise the platform and lower onto one of the six lock positions.
  5. Park the lower vehicle under that platform.
  6. To retrieve the upper vehicle, move the lower vehicle on that side, release the locks with the air-operated release, and lower.

Safety Guidelines

Never exceed 6,000 lbs. per platform. Always lower onto the locks before parking underneath. Keep the air supply in good working order so the locks release properly. Allow only trained users to operate the lift, keep people clear during movement, and follow BendPak’s manual.

Choosing Runway Spacing

The BendPak PL-12000DP offers two widths between runways: 35 inches or 41 inches, giving an outside edge of 76 or 82 inches. Narrower spacing suits many cars, while wider spacing helps with trucks and full-size SUVs. Measure the track width of the vehicles you’ll park on top before you order, and our team can help you choose the right configuration.

Setting Lock Heights

Six lock positions let you choose how high each platform sits. Measure the roof height of each vehicle you’ll park underneath and add a comfortable margin. Then confirm the vehicle on top still clears your ceiling. Because each platform is independent, the two sides can sit at different heights if your vehicles differ.

Air Supply Requirements

The safety locks on the BendPak PL-12000DP release with air pressure, so you’ll need an air supply of at least 75 PSI. Many garages already have a compressor; if yours doesn’t, plan for one before installation. Keep the air line in good condition and drain the compressor tank regularly so the lock release works smoothly every time.

BendPak PL-12000DP front view

Electrical Requirements

The standard power unit runs on 220 VAC, single phase. Other voltages, including a 110V option, are available on request. If you need a different voltage, mention it when you order so the lift arrives ready for your power supply.

Maintenance Tips

  • Inspect cables and hydraulic components on both platforms.
  • Check both power units for leaks and fluid level.
  • Test the air-operated lock release regularly.
  • Confirm locks engage at each of the six positions.
  • Keep runways, ramps, and wheel stops clean.

Four Cars in Two Spaces

The biggest benefit of the BendPak PL-12000DP is simple: four vehicles in the space normally used for two. For a homeowner with a collection, that can mean keeping every car indoors. For a building owner or dealer, it can mean doubling parking without new construction.

A Collector’s Garage Transformed

Imagine a garage with two bays and four cars. Without a lift, two of those cars sit outside or in rented storage. With the BendPak PL-12000DP, all four fit indoors. The two cars you drive least go on the platforms; the two daily drivers park underneath. When the weekend comes and you want a particular car, only that side of the lift moves. The other car stays exactly where it is. That independent access is what makes the BendPak PL-12000DP so practical for real collections.

Commercial Uses

Hotels, office buildings, condos, and dealerships all face parking pressure. The BendPak PL-12000DP doubles the number of vehicles in a given area without new construction. Independent platforms reduce the time staff spend moving vehicles, which matters in valet operations and busy dealerships. The long runways and tall drive-thru clearance accommodate a wide range of guest and inventory vehicles.

BendPak PL-12000DP side view

Long-Term Storage Tips

If vehicles will stay on the platforms for long periods, keep batteries on maintainers, check tire pressures from time to time, and look for leaks. Good lighting under the platforms helps drivers park accurately below. Floor markings make it easy to center the lower vehicles.

Why Choose BendPak

BendPak has built parking lifts for decades, serving homeowners, developers, and businesses. The BendPak PL-12000DP reflects that experience with independent platforms, practical dimensions, multiple lock positions, and a straightforward design that’s easy to live with.

Delivery Planning

As a large special-order lift, the BendPak PL-12000DP needs extra lead time and careful delivery planning. Make sure there’s a clear path to the installation area, equipment or help to unload, and enough space to assemble the lift. Our team will help you coordinate the order and delivery.

Comparing to Two Separate Four-Post Lifts

You could install two separate four-post lifts side by side to get four parking spaces. The BendPak PL-12000DP achieves the same result in a combined structure with shared posts in the middle, which can save width and give a cleaner layout. Each platform still works independently, so you keep the convenience of separate lifts. For many owners, that makes the BendPak PL-12000DP a more efficient choice for two-bay garages.

Making Daily Use Easy

A few habits make stacked parking on the BendPak PL-12000DP effortless. Mark the floor so lower vehicles park in the same spot every time. Hang a parking aid to show where the top vehicle should stop on the runways. Keep the controls and air release easy to reach. Post the lock heights you use for each vehicle. With these simple steps, raising and lowering vehicles becomes as routine as opening the garage door.

BendPak PL-12000DP detail

Protecting the Vehicles Below

The full-width platforms help shield lower vehicles from drips and debris. For extra protection during long-term storage, check the upper vehicles for leaks periodically and keep the platforms clean. A tidy, well-lit space keeps all four vehicles looking their best.

Thinking About Ceiling Height

The BendPak PL-12000DP stands 130.5 inches tall overall. Before ordering, measure your ceiling at the exact installation spot, including any beams, lights, garage door tracks, and openers. Then consider the height of the vehicles you’ll park on top when the platforms are raised. If space is tight, choose lower lock positions and park shorter vehicles underneath.

A Long-Term Investment

Adding garage space through construction is slow and expensive. The BendPak PL-12000DP doubles your parking using vertical space you already have, and it can move with you if you relocate. With proper maintenance, it will provide years of dependable service.

What Owners Appreciate

Owners of the BendPak PL-12000DP often say the independent platforms are the feature they value most. Being able to lower just one side to reach a specific car means no more juggling vehicles in the driveway. They also appreciate the tall drive-thru clearance, which lets SUVs and pickups park underneath, and the long runways that handle long-wheelbase vehicles up top. For collectors and busy households, it brings order to a garage that used to feel crowded.

Businesses value the added capacity and the time saved on vehicle moves. In facilities where parking is at a premium, every extra space counts, and the BendPak PL-12000DP delivers two extra spaces in the footprint of two.

Getting Started

Begin by measuring your space: length, width, and ceiling height. List the vehicles you’ll park on top and underneath, along with their heights, lengths, and track widths. Check your electrical service and air supply. Then contact our team. We’ll help you confirm fit, choose the right runway spacing and voltage, and place your special order so your new parking space is ready as soon as possible.

Whether you need room for a growing collection or more parking for a busy property, the BendPak PL-12000DP offers a dependable, space-saving solution that keeps every vehicle protected and easy to reach, day after day and year after year.

Reach out today and our team will help you plan every detail of your BendPak PL-12000DP installation.

Frequently Asked Questions About the BendPak PL-12000DP

What is the total capacity?

12,000 lbs., with 6,000 lbs. per platform.

How high is the drive-thru clearance?

80.5 inches, with a maximum rise of 82 inches.

How long are the runways?

183 inches.

What power does it need?

220 VAC single phase as standard; other voltages, including 110V, on request.

Does it need compressed air?

Yes. A minimum 75 PSI air supply is required to release the safety locks.

How many lock positions are there?

Six.

Support From Ironside Garage

Our team can help you check dimensions, choose runway spacing and voltage, and coordinate the special order and freight delivery. Contact us with any questions about the BendPak PL-12000DP.

Order the BendPak PL-12000DP Today

The BendPak PL-12000DP is a proven, powerful tandem parking lift. Learn more on the official BendPak website.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Bendpak PL-12000DP 12,000 Lb. Cap. Parking Lift / Tandem Independent Platforms / Ext. Rise – Long Platforms / SPECIAL ORDER”

Your email address will not be published. Required fields are marked *

Shipping & Delivery