HDS-27
$27,495.00
BendPak has designed the HDS-27 to be the four-post lift for you that can handle a 27,000 lb., Class 7 semi-truck. Sporting bigger sheaves and beefier components, this lift will deliver the dependability you’ll need to service commercial and/or municipal vehicles. If you already service those kinds
The HDS-27 Four Post Lift is a professional-grade four post lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the HDS-27 Four Post Lift, along with setup tips, maintenance advice and answers to common questions.
HDS-27 Four Post Lift Features and Specifications
Construction, Municipal and Commercial Vehicles Welcome
Despite being an entry-level lift in the medium-duty truck category, the HDS-27 is perfectly suited to take on your business well beyond the needs of most private drivers. This garage lift will bring you into the realm of construction equipment, commercial flatbed trucks, concrete mixers, garbage trucks, buses, and more.
Each BendPak four-post lift is made to exacting standards and will get the job done without undue strain or pain on the equipment. The lift is rated at 27,000 lbs. meaning everything at or under that weight limit is no problem at all. BendPak has over-engineered everything, so you can keep massive commercial and municipal vehicles up to code and ready for the next great haul.
Extended runways
By having longer runways, the HDS-27 is able to accommodate a wide variety of vehicle wheelbases, allowing you to steer massive trucks and buses onto their ramps without accidentally damaging your vehicle chassis.
Dual-hub cable sheaves
BendPak goes the extra mile to make sure you’re getting the best product possible. Each sheave contained within the runway and cross tubes is a massive 12” in diameter, and the cable sheave axles, at 4” in diameter, will greatly extend the lifespan of your lift by reducing the overall wear that is put onto these parts. Manufacturing sheave components are made big to ensure high-grade quality in the product. BendPak parts always meet or exceed ALI standards for load bearing and safety.
Heavy-duty aircraft cable
Each of the four, ½” diameter, 6 x 25 galvanized lifting cables has a 14,000 lb. breaking strength, so you can rest assured that HDS-27 will have the engineering to keep your vehicles safe at all times, especially during periods of heavy use. These won’t rust out or break apart due to bad weather, chemicals, or random garage particulate.
Built-in lubrication
The HDS-27 has grease nipples fitted into the sheaves and sheave axles. These will keep those components lubricated as they move. This feature also acts as a form of auto-maintenance, meaning that you’ll have little to do during your periodic service checks.
Flow restrictor
The HDS-27 provides top-of-the-line hydraulic technology. Integrated into the hydraulic cylinder is a flow restrictor which will provide a safe, slow descent. It will even do so in the extremely rare occurrence of a burst or ruptured hydraulic hose.
Large base plates
This high-quality lift includes substantial 12” x 12” base plates which support the massive columns.
Spring-loaded safety locks
As the HDS-27 rises, spring-loaded safety locks will engage the moving platforms. Safety ladders come standard and can be adjusted to make sure the runways stay level, which is especially useful for sloped floors.
Push-button pneumatic lock release
The steel and aluminum pneumatic cylinders are aircraft-quality and certified to last for years without sacrifice. One push against the pneumatic lock release is all you need to lower the lift release off the locks. BendPak continues to find more ways to give your technicians more control over lift operations.
Secondary lock system
Why have one lock when you can have two? A secondary slack-cable lock will engage in case of cable failure, which is extremely unlikely to ever occur. Better safe than sorry though. With this feature your lift will keep working at its best.
Integrated design
The cables, sheaves, axles, and other components are internally routed through the lift. The hydraulic cylinder itself is hidden underneath the lift. This design choice not only makes sure that the lift retains its sleek look, but it also makes sure that your lift is as safe as possible. The cables and sheaves will perform better when they’re not exposed to outside factors like dirt, grime, and anything else that could negatively affect performance.
Adjustable height locking positions
Four-post lifts are made to be able to accommodate many different vehicle types, so BendPak has made sure that it is easy to adjust the height to suit the needs of your technician and safely lock your vehicle into place.
Electric-hydraulic power system
BendPak has designed their car lifts to have their operator buttons within reach, giving you the option to raise, lower, or shut down the system at any time. The whole process will go much more smoothly with one-push controls.
Flexible protective conduit
BendPak has had their cables fitted with a protective casing which is flexible and non-conducive to electricity. Your hoses will remain intact and serviceable for many years without sacrifice, and the non-metallic tubing will ensure that you’re never shocked by the equipment.
Rolling bridge jacks
By utilizing bridge jacks you’ll be able to raise the wheels above the runways, which will let operators perform wheel and brake service on the car. The HDS-27 can support extremely heavy vehicles, making the truck and SUV adapter set a necessity for wheel/brake service. Commercial-grade hydraulic pumps come standard and require 125 PSI and 10-20 CFM.
Choose extended length
Some vehicles at the 27,000 lb. lift capacity can begin to develop monstrous proportions. For example, garage trucks are wide, tall, and feature wide wheelbases. You’ll need a car lift which will be able to handle all those dimensions, plus the weight, without giving out on you. In those scenarios, the HDS-27X might be the better option for your shop. If you ever have any questions about finding your ideal lift, feel free to reach out to a BendPak service representative to help you find the perfect four-post lift for you.
*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2011 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via sales@ironsidegarage.com
Features
- 27,000-lb. lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Supersized 12″ diameter cable sheaves
- Galvanized lifting cables
- Grease nipples
- Single hydraulic under-runway cylinder
- Integrated flow restrictor
- Durable powder coat
- Spring-loaded safety locks
- Second lock system on constant guard
- Fully enclosed lifting cables
- Multiple adjustable height locking positions
- Maintenance-free electric hydraulic power system
- Conveniently positioned operator controls
- 12″ x 12″ base plates
- Optional rolling jack
Specs

| SKU# | 5175162 |
|---|---|
| Lifting Capacity | 27,000 lbs. (12,247 kg) |
| *Max Capacity / Front Axle | 13,500 lbs. (6,123 kg) |
| *Max Capacity / Rear Axle | 13,500 lbs. (6,123 kg) |
| A – Min. Runway Height | 8.5″ (216 mm) |
| B – Max. Rise | 60″ (1,524 mm) |
| C – Max. Lifting Height | 68.5″ (1,740 mm) |
| D – Overall Width | 154″ (3,912 mm) |
| E – Outside Length | 257″ (6,528 mm) |
| F – Overall Length | 312.5″ (7,938 mm) |
| G – Height of Columns | 93″ (2,362 mm) |
| H – Width Between Columns | 134″ (3,404 mm) |
| I – Drive-Thru Clearance | 109″ (2,769 mm) |
| J – Runway Width | 22″ (559 mm) |
| K – Length of Runways | 249″ (6,325 mm) |
| L – Width Between Runways | 38″ (965 mm) or 56″ (1,422 mm) |
| M – Runway Centerline | 60″ (1,524 mm) or 78″ (1,981 mm) |
| N – Outside Edge of Runways | 82″ (2,083 mm) or 100″ (2,540 mm) |
| Rated Capacity | 185″ (4,699 mm) |
| 75% Capacity | 160″ (4,064 mm) |
| 50% Capacity | 135″ (3,429 mm) |
| 25% Capacity | 110″ (2,794 mm) |
| Locking Positions | 9 |
| Lock Spacing | Every 6″ (152 mm) |
| Motor | 220 VAC / 60 Hz / 1 Ph |
| Noise | 45 dB |
| Shipping Weight | 6,109-lbs. (2,770 kg) |
| Shipping Dimensions | 266” x 27” x 35” (6,756 mm x 685 mm x 889 mm) |
| Time to Full Rise | 75 seconds |
HDS-27 Four Post Lift Photos




HDS-27 Four Post Lift at a Glance
- The HDS-27 Four Post Lift is built for daily professional use.
- The HDS-27 Four Post Lift is backed by manufacturer support and documentation.
- Our team can confirm shipping options for the HDS-27 Four Post Lift to your location.
- The HDS-27 Four Post Lift is a smart fit for shops upgrading their equipment.
- Every HDS-27 Four Post Lift order includes help from our product specialists.
- The HDS-27 Four Post Lift combines solid construction with simple operation.
- Ask us about accessories that pair well with the HDS-27 Four Post Lift.
Key Highlights of the HDS-27 Four Post Lift
Here is a quick summary of what stands out on this four post lift:
- This high-quality lift includes substantial 12” x 12” base plates which support the massive columns.
- 27,000-lb. lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Supersized 12″ diameter cable sheaves
- Galvanized lifting cables
Why Shops Choose the HDS-27 Four Post Lift
c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`
Benefits of a Quality Four Post Lift
The best four post lift is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.
Common Uses for the HDS-27 Four Post Lift
c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`
Installation and Setup
c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`
Safety and Maintenance Tips for the HDS-27 Four Post Lift
c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`
Buy the HDS-27 Four Post Lift from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Four Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right four post lift for your shop.
For product manuals, technical documentation and manufacturer details, visit the Automotive Lift Institute (ALI).
HDS-27 Four Post Lift FAQs
Do I need special concrete for the HDS-27 Four Post Lift?
Most lifts require a minimum concrete thickness and strength. Check the installation manual for the HDS-27 Four Post Lift or contact us and we will confirm the requirements for your floor.
Is professional installation recommended?
Yes. A qualified installer will anchor, level and test the four post lift correctly, which protects your investment and your technicians.
How is the HDS-27 Four Post Lift shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the HDS-27 Four Post Lift come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Related products
Atlas FM9SL In Ground Full Rise 9000 lbs Capacity Scissor Lift
BendPak LR-60P Car Lift
BendPak MDS-6EXT Car Lift
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift If you’re looking to flush-mount your lift in the floor for a smooth sub-surface installation, be sure to choose the MDS-6LPF. It shares all the same features of the MDS-6LP but is more ideal if you want your lift to collapse perfectly parallel
BendPak SP-7XEF Car Lift
BendPak SP-7XEF Car Lift The SP-7XLF is the flush-mount version of BendPak’s full-rise scissor lift that can lift up to 7,000 lbs. This lift is perfect for a garage with a recessed area of concrete. The lift will practically be invisible. A collapsed SP-7XLF is extremely low-profile, but it can take
Forward Lift 6000MRL 6000 lbs Capacity Mid-Rise Lift
Tuxedo LR-10K-TLPAD 10,000 lbs Commercial Low Rise Pad Lift
The iDEAL LR-10K-TLPAD is a 10,000 lb. low rise, high-performance commercial, vehicle frame contact lift designed for Cars, SUVs, Vans & Trucks. The LR-10K-TLPAD Pad Lift includes the latest in design & safety features including, twin hydraulic cylinders, three locking height positions with dual lat

Reviews
There are no reviews yet.