QuickJack 6000ELX 6,000 Lb. Capacity Super-Long Portable Car Lift

$2,475.00

The ELX has the distinction of being our only car lift series to feature a single model. Its frames are super-long, even longer than our extended-length TLX series. This frame length is ideal for extremely long wheelbases, so this model fits virtually all contemporary EV cars, including top-end, lux

SKU: IRG0349 Categories: ,
Description

The QuickJack 6000ELX is a super-long portable car lift built for vehicles that other portable lifts can’t reach. With 86-inch frames, a maximum lift point spread of 76 inches, and a 6,000 lb. capacity, the 6000ELX is made for long-wheelbase EVs, luxury sedans, and other extra-long vehicles.

But seriously, why?

The TL car lift series fits 90% of our customers’ needs. The TLX series covers most other vehicles. That leaves 1 – 2% of long-wheelbase cars not covered by QuickJack. Strictly from a business perspective, we could probably get away with leaving our product offerings alone and just say, “Good luck,” to those we can’t service.

But that’s not us.

Everyone should have the ability to work on all their cars, professionally or otherwise. We know the future is here, and the future includes an incoming tide of fully electric (EV) vehicles with long wheelbases/lift point spreads. As the market stands today, there are no options for raising some of these vehicles without a full-size four-post. The 6000ELX is the only car lift, including scissor lifts and pit lifts, with a lift point spread that’s long enough to get the job done.

As luxury EV vehicles become more commonplace, we know auto shops and garages are going to need a portable/compact lift to work on these cars. Not every shop has a four-post or two-post, and smaller shops, such as many privately owned auto detailing shops, might not be able to fit one in their space. That’s why they get scissor lifts and low or mid-rise lifts. Unfortunately, super-long-wheelbase vehicles can’t be raised by these lifts.

That’s what makes the BL-6000ELX so unique. It also has a robust weight capacity to handle electric sedans, which tend to be heavier than comparably sized gas-powered cars. With a lift point spread that’s longer than the frame length of a TL model, we sincerely doubt you’ll find a vehicle that’s 6,000 lbs. or under with a wheelbase too long for this lift (outside of semi-trucks, commercial buses/mass transit vehicles, etc.).

ELX Car Lift Design

The 6000ELX portable car lift is a full 17″ longer than the TL model and about 10″ longer than the TLX model (comparison below). While the frames are longer and a little heavier than other models, they’re still convenient to roll around your garage or shop, thanks to the durable urethane construction of the wheels.

TL minimum lift point spread: 29.5″
TLX minimum lift point spread: 35.5″
ELX minimum lift point spread: 53″

TL maximum lift point spread: 60″
TLX maximum lift point spread: 66″
ELX maximum lift point spread: 76″

TL overall frame length: 69″
TLX overall frame length: 76″
ELX overall frame length: 86″

Features

Automatic safety locks

The 6,000-lb. capacity 6000ELX features the same automatic mechanical locks as our TL and TLX models. Your QuickJack is safe to lift anything (under the weight limit) that reaches the lift points.

Extended lift point spread

With a lift point range of 47.5″ – 76″, there isn’t much the ELX can’t handle. Its minimum range covers most sports cars, sedans, light-duty trucks, etc. Its maximum range makes it one of the only—if not the only—car lift that can lift vehicles with the longest wheelbases on the consumer market.

One-touch button control

The single touch of a button lifts the electric-hydraulic frames, getting your vehicle over 21″ in the air in about 30 seconds. One more push safely lowers vehicles onto the mechanical locks. Leave your precious cargo raised for minutes, hours, days, weeks or even months—however long it takes to finish your work.

Built-in hydraulic flow divider

The flow divider, built right into the power unit, ensures the frames lift evenly at all times. This is necessary because there is no crossbar(s) to act as a “brace” or mechanical leveler. Since the freedom of our open-center design is one of QuickJack’s most attractive features—and virtually no one else offers it—the promise of a level rise and descent is the most important one we can make.

Tech specs

Lifting capacity

Lifting capacity

6,000 lbs. (2,722 kg)

Lowered height

A – Frame only: 3.5″ (89 mm)
B – With 2″ block: 4″ (102 mm)

Lifting height

D – With 2″ block: 21.5″ (546 mm)
E – With 3″ block: 22.5″ (572 mm)
F – Max. height: 24.5″ (622 mm)
G – With adapters: 24.25″ (610 mm)
H – With adapters + pin: 7″ (686 mm)

Lift point spread

I – Maximum: 76″ (1,930 mm)
J – Minimum: 53″ (1,346 mm)

Frame dimensions (ea.)

K – Width: 12.5″ (318 mm)
L – Length: 86.75″ (2,203 mm)
A – Height: 3.5″ (89 mm)
Weight: 112 lbs. (51 kg)

Other specs

Power/Voltage: 110V, 60HZ, 1PH
Time to full rise: 30 seconds
Power unit weight: 30 lbs. (13 kg)
Shipping dimensions (ea. frame):
89.75″ (L) x 16.75″ (W) x 6″ (H)
(2,279 mm x 425 mm x 154 mm)
Shipping weight: 318 lbs. (144 kg)

What’s inside?

6000ELX Left Frame Assembly

6000ELX Right Frame Assembly

1x Hydraulic power unit with control

4x Medium rubber lift blocks (2″)

4x Tall rubber lift blocks (3″)

2x Short hydraulic hoses

2x Long hydraulic hoses

2x Frame-positioning handles

Fittings and thread tape for setup

Instruction manual

Requirements:

3 liters of Automatic Transmission Fluid

Air source to inflate air cylinders up to 50 PSI

Assembly tools

Note: QuickJack is shipped in three boxes

6000ELX Key Facts

  • Capacity: 6,000 lbs.
  • Overall frame length: 86 inches
  • Maximum lift point spread: 76 inches
  • Lifts a vehicle more than 21 inches in about 30 seconds
  • Automatic mechanical safety locks, like TL and TLX models
  • One-touch button control

How the 6000ELX Compares to TL and TLX

  • Overall frame length: 69 inches (TL), 76 inches (TLX), 86 inches (ELX)
  • Maximum lift point spread: 60 inches (TL), 66 inches (TLX), 76 inches (ELX)

The 6000ELX is about 17 inches longer than the TL and about 10 inches longer than the TLX. That extra length is what lets it reach the lift points on the longest vehicles in the consumer market under 6,000 lbs.

Made for Long-Wheelbase EVs

Electric vehicles are changing what shops and home garages need. Many EV sedans have long wheelbases and widely spaced lift points, and they tend to weigh more than gas cars of the same size because of their batteries. Low-rise, mid-rise, and scissor lifts often can’t reach their lift points. The 6000ELX was designed to solve exactly that problem, giving EV owners and shops a portable way to lift these vehicles without a full-size four-post lift.

Perfect for Detail Shops and Small Garages

Not every shop has room for a two-post or four-post lift. Many detail shops and small garages rely on low-rise or scissor lifts, which may not fit super-long vehicles. The 6000ELX fills that gap. It’s portable, needs no permanent installation, and handles vehicles that would otherwise require a full-size lift.

6000ELX

Same Trusted Safety Locks

The 6000ELX uses the same automatic mechanical locks found on QuickJack TL and TLX models. As the frames rise, the locks engage. Always rest the vehicle on the locks before working underneath, and never exceed the 6,000 lb. capacity.

One-Touch Lifting

A single touch of the button raises the electric-hydraulic frames, lifting the vehicle more than 21 inches in about 30 seconds. Another push lowers it safely. There’s no pumping or cranking, just fast, simple control.

Still Easy to Move

The 6000ELX frames are longer and a little heavier than other QuickJack models, but they’re still easy to roll around a garage or shop. When the job is done, the frames can be stored upright or hung on wall hangers to keep the floor clear.

Who Should Buy the 6000ELX

  • Owners of long-wheelbase electric sedans
  • Owners of extended luxury sedans and long vehicles
  • Detail shops that service EVs and luxury cars
  • Small shops without room for a four-post lift
  • Anyone whose vehicle’s lift points are too far apart for TL or TLX frames

For shorter vehicles, see our other portable car lifts.

6000ELX front view

How to Use the 6000ELX

  1. Park on a flat, level, hard surface and set the parking brake.
  2. Connect the hoses and power unit.
  3. Slide one frame under each side of the vehicle.
  4. Position the blocks under the manufacturer’s lift points.
  5. Raise a few inches and check every contact.
  6. Lift to full height and make sure the locks are engaged.

Safety Tips

Always lower the vehicle onto the 6000ELX’s mechanical locks before working underneath. Stay within the 6,000 lb. capacity, and remember that many EVs are heavier than they look. Check your vehicle’s curb weight first. Keep others clear while lifting, chock the wheels when working on one end, and inspect hoses and blocks before each use.

EV Lift Point Tips

EVs carry large battery packs under the floor. It’s important to lift only at the manufacturer’s designated lift points and never on the battery pack itself. Check your owner’s manual or service information for exact locations, and use appropriate blocks or pads. Taking a few extra minutes to confirm lift points helps protect the battery and the vehicle.

Jobs You Can Do With the 6000ELX

  • Tire rotations and seasonal wheel changes
  • Brake inspections and service
  • Suspension checks and repairs
  • Underbody inspections and cleaning
  • Detailing wheel wells, rocker panels, and lower bodywork
  • Paint protection film and coating on lower panels

6000ELX side view

Where to Use It

The 6000ELX needs a hard, flat, level surface. Because the frames are 86 inches long, make sure you have enough room to slide them in from the side of the vehicle. Avoid gravel, dirt, grass, and slopes, and keep the work area bright and clear.

Maintenance Checklist

  • Inspect hoses and fittings for leaks or wear.
  • Keep couplers clean and capped.
  • Check the power unit’s fluid level as directed.
  • Replace worn rubber blocks.
  • Store frames upright and dry.

6000ELX vs. a Four-Post Lift

Before the 6000ELX, the main way to lift some long-wheelbase vehicles was a full-size four-post lift. Four-post lifts need a lot of floor space, high ceilings, and a big investment. The 6000ELX gives you a portable alternative that fits in smaller garages and shops, sets up in minutes, and stores away when you’re done. For routine service, its 21-plus inches of lift is often all you need.

6000ELX vs. Jack and Stands

Using a floor jack on a long EV can be tricky, since lift points are often specific and spaced far apart. The 6000ELX reaches both front and rear lift points on each side at once, lifts in about 30 seconds, and holds the vehicle on mechanical locks. It’s faster, more stable, and gives you more confidence under the car.

6000ELX detail

Planning Your Space

Measure your garage or bay before ordering. You’ll want room for the vehicle plus space on each side to slide the 86-inch frames into position. Plan for a nearby outlet for the power unit, and think about where you’ll store the frames, such as on wall hangers. A little planning makes every lift with the 6000ELX smooth and quick.

Why EV Owners Need a Different Kind of Lift

Electric vehicles have changed the shape of the underside of the car. Large, flat battery packs take up much of the floor area, and manufacturers set specific lift points around them. Many EV sedans also have long wheelbases to fit those batteries. That combination of long spacing and strict lift point locations is hard for compact lifts to handle. The 6000ELX was designed with that reality in mind, giving owners a way to lift at the right points without guesswork.

As EVs become more common, more home garages and independent shops will need a practical way to lift them. The 6000ELX offers that solution in a portable package.

A Smart Tool for Detailers

Luxury and EV owners often invest in high-end detailing, ceramic coatings, and paint protection film. Working on lower panels, rocker panels, and wheel wells is much easier with the vehicle raised. The 6000ELX gives detailers safe, even access to those areas, even on long vehicles that standard lifts can’t handle. It can help a detail shop take on more premium vehicles and deliver better results.

Care for Heavier Vehicles

EVs are often heavier than similar gas cars. Before you lift, check the actual curb weight on the door jamb sticker or in the owner’s manual, and remember to account for cargo and accessories. Staying well within the 6000ELX’s 6,000 lb. capacity gives you a comfortable safety margin. Remove heavy items from the trunk and frunk before lifting.

6000ELX in use

Storage Ideas for Long Frames

Long frames need a little planning for storage. Many owners stand them upright against a wall or use QuickJack wall hangers. Choose a spot near where you’ll lift so moving the frames is easy. Keep the power unit, hoses, and blocks together on a nearby shelf so everything is ready for the next lift.

Your First Lift

Start by finding your vehicle’s lift points in the manual and measuring the distance between them. Slide the 6000ELX frames into place, set the blocks, and raise the vehicle slowly while checking each contact. Once it’s resting on the locks, you’ll have safe, open access to the underside. After a few lifts, the routine will feel quick and familiar.

Who Benefits Most From the 6000ELX

The 6000ELX shines for owners and shops that have run out of options with standard portable lifts. If you’ve tried a TL or TLX model and found that your lift points are just out of reach, the 6000ELX is the natural next step. It’s also a smart purchase for shops that want to be ready for the growing number of long-wheelbase EVs coming in for tires, brakes, and detailing. Instead of turning those customers away or sending them elsewhere, you can lift their vehicles safely in your own bay.

Home owners of long luxury sedans and EVs benefit too. With the 6000ELX, you can handle tire rotations, brake checks, and inspections at home, saving time and money while keeping a close eye on your vehicle’s condition. It turns jobs that once required a shop visit into simple tasks you can do on your own schedule.

In short, the 6000ELX fills a real gap in the market. It brings portable, safe, and quick lifting to the longest vehicles under 6,000 lbs., and it does so in a package that fits ordinary garages and small shops.

Frequently Asked Questions About the 6000ELX

What is the capacity of the 6000ELX?

It is rated for 6,000 lbs.

How long are the frames?

The overall frame length is 86 inches.

What is the maximum lift point spread?

Up to 76 inches.

How fast does it lift?

It raises a vehicle more than 21 inches in about 30 seconds.

Is it good for EVs?

Yes. It was designed with long-wheelbase EVs in mind. Always use the manufacturer’s lift points and confirm vehicle weight first.

Support From Ironside Garage

Unsure whether you need the TL, TLX, or 6000ELX? Share your vehicle’s details and our team will help you compare lift point spacing and capacity. We’re here before and after your order.

Order the 6000ELX Today

The 6000ELX is a proven, powerful portable lift for the longest vehicles on the road. Learn more on the official QuickJack website, or explore our full car lifts collection.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “QuickJack 6000ELX 6,000 Lb. Capacity Super-Long Portable Car Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery