QuickJack Package (1) 5000TL-110V + (1) Wall Hangers Set + (1) Pinch Weld Blocks Set
$2,025.00
At QuickJack we are constantly improving and evolving our products to fit all of your automotive needs in the garage or on the track. 5000TL is the highly anticipated sequel to one of QuickJack’s most popular automotive tool to have ever hit the home garage or auto repair shop. This high-quality por
The QuickJack 5000TL Package bundles three essentials in one order: the 110V QuickJack 5000TL portable car lift, a wall hangers set, and a urethane pinch-weld blocks set. With the 5000TL Package, you can lift cars up to 5,000 lbs., protect unibody pinch welds, and hang the frames on the wall when the job is done.
Wall Hangers Set
The opportunities for easy and convenient storage are practically endless. Some people prefer to hang their frames on the wall, up and out of the way, and these hangers are the way to make that happen.
If you’d like to hang your portable car lift frames on the wall of your garage, QuickJack’s exclusive hangers will mount directly into a sturdy wall stud for safe, simple storage. It is recommended that the hangers are installed at the same height while also being high enough that the frames will rest on the floor. This will make it much easier to lift and hang the frames onto the hooks of the wall hangers.
Pinch Weld Blocks Set
Supporting cars on pinch-weld rails creates excessive pressure points which can end up gouging or tearing the standard rubber blocks. You could also end up inadvertently damaging delicate body rails on unibody vehicles. QuickJack’s urethane rubber pinch-weld blocks were engineered with a cross-cut slotted design, which allows you to position them lengthwise or crosswise. They’re the perfect body cradling tool to safely support rocker panels or sheet metal body rails, especially pinch-weld rails which have been degraded over time due to corrosion from grime and road salt.
You’ll be able to ensure a long lifespan for your lift blocks with QuickJack’s specially designed pinch-weld jack pads. You can place these taller-than-average blocks independently in the lift block trays. Not only that, but they can be stacked without placing a pinch-weld block on top of a small standard block. (The pinch-weld and tall standard blocks should not be stacked.) Ditch the wooden blocks, hockey pucks, and the towels which can slip or tear easily, resulting in vehicle damage, or worse, unstable lifting. The durable urethane rubber is impermeable to oil, grease, and gas. It will also be able to last for years and years of simple, maintenance-free lifting.
Features
5000TL
- Automatic Safety Locks
- Increased Lifting Height
- One-Handed Operation
- Accessories to Increase Versatility
Wall Hangers
- Sold in sets of two
- NEW! Now in powder-coated black!
- One size fits all QuickJack models
- Over-engineered to 150% rated capacity
- Solid-steel construction
- Sleek, laser-cut QuickJack logo design
- Designed and engineered by QuickJack
Pinch-Weld Blocks
- Specially formulated urethane rubber
- Bilateral deep slots accommodate virtually all pinch weld frames
- Position lengthwise or crosswise
- Water/Chemical resistant and 100% weatherproof
- Single-piece construction for superior hold
- Sold in sets of 4
Specifications
5000TL
Lifting Capacity
| Capacity | 5,000 lbs. (2,268 kg) |
|---|
Lowered Height
| A – Frame only: | 3″ (76 mm) |
|---|---|
| B – With 2″ block: | 3.5″ (89 mm) |
Lifting Height
| D – With 2″ block: | 21″ (521 mm) |
|---|---|
| E – With 3″ block: | 22″ (546 mm) |
| F – Max. height: | 24″ (616 mm) |
| G – With adapters: | 24″ (597 mm) |
| H – With adapters + pin: | 26.75″ (673 mm) |
Lift Point Spread
| I – Maximum: | 60″ (1,524 mm) |
|---|---|
| J – Minimum: | 37″ (940 mm) |
Frame dimensions (ea.)
| K – Width: | 11″ (278 mm) |
|---|---|
| L – Length: | 70″ (1,778 mm) |
| A – Height: | 3″ (76 mm) |
| Weight: | 78 lbs. (35 kg) |
Other Spec
| Power/Voltage | 110V, 60HZ, 1PH |
|---|---|
| Time to full rise: | 30 seconds |
| Power unit weight: | 30 lbs. (13 kg) |
| Shipping Dimensions (ea. Frame): | 73.5″ (L) x 15.25″ (W) x 5″ (H) (1,869 mm x 385 mm x 129 mm) |
| Shipping weight: | 318 lbs. (144 kg) |
Wall Hangers
| A – Width: | 4.75″ (121 mm) |
|---|---|
| B – Height: | 6.75″ (172 mm) |
| C – Depth: | 2.25″ (57 mm) |
| Weight (ea.): | 1 lbs. (0.5 kg) |
| Shipping weight: | 3 lbs. (1.4 kg) |
Pinch-Weld Blocks
| A – Length: | 4″ (102 mm) |
|---|---|
| B – Width: | 3″ (76 mm) |
| C – Height of puck: | 3″ (76 mm) |
| D – Pinch-weld width: | 0.4″ (10 mm) |
| E – Pinch-weld depth: | 0.5″ (13 mm) |
What’s in the 5000TL Package
- QuickJack 5000TL (110V) – 5,000 lb. capacity, up to 24 inches of lift, 70-inch frames, 3-inch lowered height, full rise in about 30 seconds
- Wall hangers set – hangers that mount into a sturdy wall stud to hold the frames upright
- Pinch-weld blocks set – urethane blocks with a cross-cut slot to cradle pinch-weld rails
Buying the 5000TL Package gets you the lift and the two most popular accessories together, so you’re fully equipped from the first day.
About the 5000TL Lift
The 5000TL is one of QuickJack’s most popular portable lifts. It raises cars up to 5,000 lbs. to as much as 24 inches, and up to 26.75 inches with adapters and pin. Its lift point spread of 37 to 60 inches suits a wide range of compact cars, sports cars, and sedans. Dual-position automatic safety locks engage at mid-rise and full-rise, and the handheld pendant gives you simple one-handed control. It runs on standard 110V household power.

Why Pinch-Weld Blocks Matter
Most modern cars are unibody vehicles that use pinch-weld rails as factory lift points. Supporting a car on those thin seams with standard flat blocks creates high pressure points. That can gouge or tear the rubber blocks and may bend or damage the body rail. The pinch-weld blocks in the 5000TL Package are made from urethane with a cross-cut slot. The slot lets you position each block lengthwise or crosswise so the seam sits inside the groove while the block carries the load.
The result is better support, less wear on your blocks, and more protection for your car’s body.
Why Wall Hangers Make Sense
Portable lifts are great because they don’t take up permanent space. Wall hangers take that one step further. They mount directly into a sturdy wall stud and hold the frames upright, off the floor and out of the way. QuickJack recommends installing both hangers at the same height, high enough to hold the frames but low enough that the frames can rest on the floor. That makes it easy to tip a frame up onto the hooks and lift it off again.

Who the 5000TL Package Is For
- Owners of unibody cars with pinch-weld lift points
- Home mechanics who want a tidy, organized garage
- First-time lift buyers who want a complete setup
- Track day drivers with compact or mid-size cars
- Detailers working on cars up to 5,000 lbs.
Looking for a different capacity? Browse all our portable car lifts.
Setting Up the 5000TL Package
- Choose a wall near your lifting spot and locate a sturdy stud.
- Mount both wall hangers at the same height.
- Assemble the 5000TL and prepare the power unit as the manual directs.
- Park on flat, level concrete and set the parking brake.
- Slide the frames under the car and fit the pinch-weld blocks.
- Line up each block’s slot with the pinch-weld seam.
- Lift a few inches, check contact, then raise fully so the locks engage.
Safety First
Never exceed the 5,000 lb. capacity of the lift in the 5000TL Package. Always rest the car on the automatic safety locks before working underneath. Keep people and pets clear while lifting, chock the wheels when working on one end, and check hoses and blocks before every use. Read and follow the QuickJack operating manual.

Jobs Made Easy With the 5000TL Package
- Tire rotations and seasonal wheel swaps
- Brake pads, rotors, and calipers
- Oil and filter changes
- Suspension and coilover work
- Exhaust repairs and upgrades
- Detailing wheel wells and rocker panels
Where to Use It
Use the lift on a hard, flat, level surface such as a concrete garage floor. Avoid gravel, dirt, grass, and slopes. Leave room to open doors and move around, and keep the space well lit.
Caring for Your 5000TL Package
- Inspect hoses and fittings for leaks before each use.
- Keep couplers clean and capped when disconnected.
- Check the fluid level in the power unit as directed.
- Wipe oil and dirt off the urethane pinch-weld blocks.
- Hang the frames on the wall hangers after each use.
Package vs. Buying Separately
Many 5000TL owners end up buying wall hangers and pinch-weld blocks later, after realizing how useful they are. The 5000TL Package includes both from the start, so you avoid separate orders and have everything you need on day one. You also know every piece is designed to work together.
5000TL Package vs. Jack and Stands
Jack stands require lifting each corner separately, and a floor jack’s flat saddle can crush pinch welds. The 5000TL Package lifts a whole side of the car at once on blocks designed to cradle the seams, then holds the car on automatic locks. It’s faster, gentler on your car, and more comfortable to work with.
Keeping Your Garage Organized
A tidy garage is a safer and more enjoyable place to work. With the 5000TL Package, the frames hang on the wall, the pinch-weld blocks and power unit sit on a nearby shelf, and your floor stays clear. When it’s time to work, everything is in one place and ready to go. When you’re done, it all goes back in minutes.

Owner Tips
- Mount the hangers close to where you’ll park for lifting.
- Mark the frame positions on the floor with tape.
- Keep a photo of your car’s lift points from the owner’s manual.
- Store the pinch-weld blocks and pendant in a labeled bin.
- Raise slowly at first and check that each seam sits in its slot.

Getting the Pinch-Weld Blocks Right
The cross-cut slot in each urethane block is what makes the 5000TL Package so useful for unibody cars. Start by finding your car’s pinch-weld lift points in the owner’s manual. They’re usually marked by small notches or arrows on the seam under the rocker panels. Slide the frames under the car and position each block so the seam drops into the slot. You can turn the blocks lengthwise or crosswise depending on how the seam runs and how the frame lines up.
Raise the car a couple of inches, then stop and look at each block. The seam should sit inside the groove, with the flat surfaces of the block supporting the body on either side. If anything looks off, lower, adjust, and try again. A careful first lift sets you up for a quick routine every time after.
Choosing a Spot for the Wall Hangers
Pick a wall close to where you normally lift, so carrying the frames is short and easy. Use a stud finder to locate solid studs, and mount both hangers at the same height. The goal is for each frame to stand on the floor while resting against its hook, so you’re tipping the frame into place rather than lifting its full weight overhead. That makes storage safer and much less tiring.
A Complete Setup for First-Time Buyers
If this is your first lift, the 5000TL Package removes the guesswork. Instead of figuring out which accessories you’ll need later, you get the lift, storage, and unibody protection together. You can start using it right away with confidence that you have the right tools for most modern cars.
Saving Time and Money
Routine maintenance like tire rotations, brake pads, and oil changes can be done at home with the 5000TL Package. That saves on shop labor and lets you work on your own schedule. Many owners find that the time saved on setup makes it easier to stay on top of regular maintenance, which helps their cars last longer.
Built for Years of Use
The 5000TL’s steel frames, the sturdy wall hangers, and the weatherproof, oil-resistant urethane blocks are all built for regular use. With basic care, the 5000TL Package will be ready for every project for years.
Vehicles That Suit the 5000TL Package
The 5000TL in this package works well with compact cars, hatchbacks, coupes, sports cars, and many mid-size sedans that weigh 5,000 lbs. or less. Its lift point spread of 37 to 60 inches covers a large share of everyday passenger cars. Because so many of those vehicles are unibody designs with pinch-weld lift points, the included pinch-weld blocks make the 5000TL Package a natural fit for most modern cars. If you drive a heavier SUV or a long-wheelbase vehicle, ask our team about higher-capacity or extended QuickJack options.
Track Day and Travel Use
The 5000TL is light enough to bring to track days and car events, and the pinch-weld blocks travel easily in a small bag. At the track, you can lift the car between sessions, swap wheels, and check brakes in minutes. Back home, the frames go right back on the wall hangers. It’s a flexible setup that works wherever you do.
A Typical Tire Rotation
Here’s how a quick tire rotation goes with the 5000TL Package. Take the frames off the wall hangers and slide them under the car. Fit the pinch-weld blocks and line up the seams with the slots. Press the button and raise the car a few inches, check every block, then lift to full height so the locks engage. Loosen and remove all four wheels, rotate them, and torque them back on. Lower the car, slide the frames out, and hang them back up. The whole job takes a fraction of the time it would on jack stands.
That’s the real benefit of a complete package. Everything has a place, everything works together, and routine maintenance becomes simple enough that you’ll actually look forward to doing it yourself.
Why Customers Choose the 5000TL Package
Customers often tell us they chose the 5000TL Package because it felt like the complete answer. They wanted a safe lift for their car, a way to keep their garage tidy, and the confidence that their pinch welds would not be damaged. This package delivers all three in one order. It is simple to set up, easy to store, and ready for the jobs home mechanics do most, from tire rotations and brakes to oil changes, suspension upgrades, and detailing.
If you want a lift that is ready to use, easy to put away, and gentle on your car, the 5000TL Package is a smart, well-rounded choice for any home garage.
Frequently Asked Questions About the 5000TL Package
What’s included in the 5000TL Package?
One 110V QuickJack 5000TL lift, one wall hangers set, and one pinch-weld blocks set.
What is the lift’s capacity?
The 5000TL is rated for 5,000 lbs.
How high does it lift?
Up to 24 inches, or 26.75 inches with adapters and pin.
Do I need pinch-weld blocks?
They’re recommended for unibody cars that use pinch-weld rails as lift points.
How are the wall hangers installed?
They mount directly into a sturdy wall stud. Install both at the same height.
Support From Ironside Garage
Our team can help you confirm that the 5000TL Package fits your car, explain delivery, and suggest other accessories. Reach out any time before or after your order.
Order the 5000TL Package Today
The 5000TL Package is a proven, powerful, and complete lifting kit for home garages. Learn more on the official QuickJack website, or browse our full car lifts collection.
Related products
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable When it’s time to add some much needed versatility and productivity to your professional shop or home garage, your first stop should always be a BendPak car lift. Our 6,000-lb. capacity mid-rise scissor lift is designed to fit nicely into
BendPak MD-6XP Car Lift
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift We’re not just talking a big game; we’re offering the first open-center mid-rise lift ever made. Decades of experience have taught us a thing or two about vehicle lift points. A car lift with longer platforms means you get to lift more vehicle t
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift If you’re looking to flush-mount your lift in the floor for a smooth sub-surface installation, be sure to choose the MDS-6LPF. It shares all the same features of the MDS-6LP but is more ideal if you want your lift to collapse perfectly parallel
BendPak SP-7XE Car Lift
BendPak SP-7XE Car Lift The SP-7XE is a space-saving, frame engaging lift from BendPak. This high-quality lift features no cross members at all, meaning installation is easier than ever. This lift can easily accommodate most passenger vehicles as well as light trucks, and it comes loaded with pneuma
Challenger DX77 7700 lb ALI Certified Scissor Lift
Challenger DX77 7700 lb ALI Certified Scissor Lift Looking for a scissor lift that can easily handle many makes and models while ensuring maximum productivity and safety? Look no further than the DX77. With a robust 7,700 lbs. capacity and a synchronized hydraulic system, this lift can handle many v

Reviews
There are no reviews yet.