AFF 852ASD 30 Ton Super Duty Shop Press
$2,280.00
AFF 852ASD 30 Ton Super Duty Shop Press
The AFF 852ASD is a 30-ton Super Duty shop press with fully welded construction, a lateral head adjuster, a polycarbonate safety shield, and a double-pump air motor. With a 10-piece pin and bearing adapter set included, the AFF 852ASD is ready for bearing, bushing, and pin work right out of the crate.
AFF 852ASD 30 Ton Super Duty Shop Press
Fully welded construction for exceptional strength and durability
7 position bed height configuration for ultimate operator flexibility
Lateral head adjuster provides smooth side to side movement for a greater working range
10 pc pin and bearing press adapter set for a variety of press applications
Glycerin filled gauge accurately shows pressing force
Shatter resistant polycarbonate shield provides maximum protection against shrapnel and debris
Double pump air motor for faster speeds
Includes 2 pc press plate set
Comes equipped with overload protection
AFF 852ASD Features
- 30-ton pressing capacity
- Fully welded construction for strength and durability
- Seven-position bed height configuration
- Lateral head adjuster for smooth side-to-side movement
- 10-piece pin and bearing press adapter set
- Glycerin-filled gauge that shows pressing force
- Shatter-resistant polycarbonate shield against shrapnel and debris
- Double-pump air motor for faster speeds
- Two-piece press plate set included
- Overload protection
Super Duty Construction
The AFF 852ASD uses a fully welded frame instead of bolted joints. Welded construction adds rigidity and durability, helping the press handle repeated high-force jobs without loosening or flexing. For shops that use their press every day, that strength translates into reliable, consistent performance.
Built-In Safety Shield
Pressing parts can occasionally crack or shatter under load. The AFF 852ASD includes a shatter-resistant polycarbonate shield that helps protect operators from flying fragments and debris. It’s a valuable safety feature that many presses don’t include as standard.
Lateral Head Adjustment
The lateral head adjuster lets the ram move smoothly from side to side, expanding the working range. Instead of shifting heavy workpieces to line them up under the ram, you can move the head to the work. That saves time and reduces strain.
Fast Double-Pump Air Motor
A double-pump air motor drives the hydraulics for faster ram speeds. Technicians spend less time waiting for the ram to reach the work and more time completing jobs. Overload protection helps prevent exceeding the press’s rated capacity.
Accurate Force Readings
The glycerin-filled gauge dampens needle vibration and gives clear, accurate readings of pressing force. Watching the gauge helps operators apply just enough force and recognize when a part begins to move.
Ready to Work
The AFF 852ASD includes a 10-piece pin and bearing press adapter set and a two-piece press plate set. With these accessories, you can start pressing bearings, bushings, and pins immediately without buying extra tools.
Seven Bed Positions
A seven-position bed lets you set the right working height for each job, from small bushings to larger hubs. Keeping the ram travel short improves control and speeds up the work.

Who Should Buy the AFF 852ASD
- Automotive repair shops pressing bearings and bushings
- Light truck and fleet service departments
- Tire and wheel shops doing hub bearing work
- Small engine and equipment repair shops
- Fabrication shops needing controlled pressing force
Explore more tools in our shop equipment section.
How to Use the AFF 852ASD Safely
- Set the bed to the position that brings the workpiece close to the ram.
- Place the press plates and support the workpiece squarely.
- Choose the right adapter from the 10-piece set.
- Position the safety shield.
- Use the lateral head adjuster to align the ram with the pressing point.
- Apply pressure with the air motor while watching the gauge.
- Release pressure fully before removing or adjusting parts.

Safety Guidelines
Always wear eye protection and gloves, even with the shield in place. Support workpieces fully, use correctly sized adapters, and stand to the side rather than in line with the part. Never exceed the AFF 852ASD’s 30-ton capacity, and keep hands clear of the ram. Follow the manufacturer’s instructions and inspect the press before each use.
Common Jobs
- Wheel bearings in hubs and knuckles
- Suspension bushings
- Pins and kingpins
- U-joints
- Gears and pulleys on shafts
- Straightening small brackets
Maintenance Tips
- Check hydraulic fluid and inspect for leaks.
- Inspect the air motor fittings and hoses.
- Keep the ram, adapters, and plates clean.
- Check the shield for cracks and replace if damaged.
- Confirm the gauge reads correctly.
- Inspect bed pins and welds regularly.
Why 30 Tons Fits Many Shops
A 30-ton press covers most passenger car and light truck pressing jobs. It’s powerful enough for wheel bearings, bushings, and U-joints, while remaining compact. The AFF 852ASD adds Super Duty features like a welded frame, safety shield, lateral head, and fast air motor, making it a step up from basic 30-ton presses.
A Typical Hub Bearing Job
A technician removes a front knuckle with a worn pressed-in bearing. At the AFF 852ASD, they set the bed to a height that puts the knuckle near the ram and lay down the press plates. From the 10-piece adapter set, they choose a driver and receiving cup that match the bearing. With the shield in place, they use the lateral head adjuster to center the ram, then apply force with the air motor while watching the glycerin-filled gauge.
The old bearing presses out cleanly. After cleaning the bore, they press the new bearing in squarely using the same steps. The welded frame stays rigid throughout, and the technician has full control.
Bushing Replacement
Control arm and trailing arm bushings wear over time, affecting ride and handling. The AFF 852ASD makes replacement straightforward. Support the arm on the press plates, select the right adapters, and press the old bushing out. Then press the new one in slowly, checking alignment as you go. The lateral head adjuster helps when an arm has more than one bushing.

Why a Safety Shield Matters
Parts under high pressure can fail suddenly. Bearings can shatter, and brittle castings can crack. The AFF 852ASD’s polycarbonate shield adds a barrier between the operator and the workpiece, reducing the risk of injury from flying fragments. Combined with proper eye protection and safe positioning, it helps make pressing work much safer.
The Value of an Adapter Set
Using the right adapter is critical for safe, effective pressing. The wrong size can damage parts or slip under load. The AFF 852ASD’s included 10-piece pin and bearing adapter set covers many common sizes, so technicians are more likely to use the correct tool every time. Keep the set organized near the press so it’s always within reach.
Air-Powered Productivity
Manual pumping slows technicians down, especially on repetitive jobs. The AFF 852ASD’s double-pump air motor speeds up ram travel and reduces fatigue. Technicians can focus on watching the workpiece and gauge instead of working a handle, which improves both safety and productivity.
AFF 852ASD vs. Basic 30-Ton Presses
Many 30-ton presses offer the same basic capacity but leave out features that make daily work easier and safer. The AFF 852ASD adds a fully welded frame, a lateral head adjuster, a shatter-resistant shield, a glycerin-filled gauge, a fast double-pump air motor, overload protection, and a full adapter set. Those extras save time on every job and help protect both operators and parts. For shops that press often, the difference is noticeable.

AFF 852ASD vs. the 50-Ton 854ASD
AFF also offers a 50-ton Super Duty model. If your shop regularly works on heavier truck and equipment components, the higher capacity may be worth it. For most passenger car and light truck work, the 30-ton AFF 852ASD provides plenty of force in a more compact package. Our team can help you choose based on the jobs you see most.
Planning Your Pressing Station
Place the AFF 852ASD on a solid, level floor with room around it to load parts and operate safely. Run an air line to the press for the air motor. Store the adapter set, press plates, and other accessories on a nearby rack. Good lighting helps operators see clearly during pressing. An organized station makes every job faster.
Training Operators
Make sure every operator understands bed adjustment, the lateral head, the shield, the air motor controls, and how to read the gauge. Demonstrate safe positioning and the importance of releasing pressure before adjustments. Post the key safety rules near the press.
Bringing Pressing Work In-House
Many shops outsource bearing and bushing pressing because they lack a reliable press. That adds cost, delays, and coordination. With the AFF 852ASD, those jobs can be completed in-house the same day. Customers get their vehicles back sooner, and your shop keeps the labor revenue. Over time, the press can pay for itself through added work and fewer outsourced jobs.

U-Joint Service
Driveshaft U-joints require pressing caps in and out of yokes. With the right adapters from the included set and the yoke supported properly on the press plates, the AFF 852ASD gives you the controlled force needed to remove and install U-joints without damaging the yoke. The gauge helps you avoid excessive force that could distort the yoke ears.
Fabrication and Straightening
Fabrication shops use presses for bending, forming, and straightening steel parts. The AFF 852ASD’s welded frame and gauge give fabricators a stable, controllable platform for these tasks. With suitable dies and fixtures, it becomes a flexible tool for custom projects.
Durability You Can Rely On
A press is a long-term investment, and the AFF 852ASD’s fully welded frame is built for years of demanding use. Regular maintenance, such as checking fluid levels, inspecting air fittings, and keeping adapters clean, helps ensure reliable performance for the long haul.
Protecting Parts and Profits
Damaged parts cost money and time. Controlled force, correct adapters, and solid support help prevent cracked housings, distorted bores, and ruined bearings. The AFF 852ASD’s gauge and adapter set make it easier to press carefully and avoid costly mistakes.
Press Safety Checklist
- Wear safety glasses and gloves.
- Inspect the press, shield, and adapters before use.
- Lock the bed securely at the selected height.
- Support the workpiece fully on the press plates.
- Close the shield and stand to the side.
- Apply force gradually while watching the gauge.
- Release pressure before any adjustment.
What Technicians Appreciate
Technicians often single out the lateral head adjuster and the safety shield as their favorite features. Being able to move the ram instead of the part saves time and effort, and the shield adds peace of mind on every job. The fast air motor and clear gauge round out a press that feels capable and controlled.

A Smart Upgrade
If your shop is still using an older, basic press, the AFF 852ASD is a worthwhile upgrade. Its Super Duty features make everyday pressing safer and faster, and the included accessories mean you’re ready to work immediately. Many shops find the improved efficiency and safety quickly justify the investment.
Fleet Maintenance Applications
Fleet shops servicing cars, vans, and light trucks regularly replace bearings and bushings. The AFF 852ASD’s air motor reduces fatigue on repetitive jobs, and the adapter set covers many common sizes. Completing these repairs in-house helps keep fleet vehicles on the road and reduces downtime.

Getting Started
If you’re ready to add a dependable 30-ton press to your shop, the AFF 852ASD is a strong choice. Contact our team to confirm it fits your space and air supply, ask about additional accessories, and arrange delivery. We’ll help you get set up so you can start pressing right away.
Small Engine and Equipment Repair
Small engine shops and outdoor power equipment dealers work on mowers, tillers, generators, and other machines that use pressed bearings and bushings. The AFF 852ASD gives these shops a capable, controlled press for spindle bearings, axle bushings, and similar parts. Its compact capacity and included adapters are a good match for the smaller components common in this type of work, while the welded frame stands up to daily use.
Tire and Wheel Shops
Many tire and wheel shops also handle hub and wheel bearing replacement. With the AFF 852ASD, they can press bearings in-house instead of sending knuckles out or turning the job away. That adds a profitable service and keeps customers coming back for related work like alignments and suspension repairs.
Explaining Value to Customers
Customers appreciate fast turnaround. When you can tell them their bearing or bushing job will be done the same day because you press parts in-house, you build trust and loyalty. The AFF 852ASD makes that possible while helping your technicians work safely and accurately.
Keeping the Press Ready
At the end of each day, release pressure, lower the ram, wipe down the bed, plates, and adapters, and return accessories to their storage. Check the shield for damage and the air connections for leaks. A clean, ready press is safer and faster to set up for the next job.
Choosing the Right Adapter
Using the correct adapter is one of the most important parts of safe pressing. A driver that’s too small can mushroom a bearing race or damage the bore, while one that’s too large can bind against the housing. With the AFF 852ASD’s 10-piece adapter set, technicians can choose a driver that matches the outer race or bushing shell closely. Always press on the part of the bearing or bushing that is being moved, support the housing evenly, and apply force in a straight line. These habits protect both the part and the press, and they help every job go smoothly from start to finish.
When a job needs a size not included in the set, add the right adapter rather than improvising. The small cost of an extra adapter is far less than the cost of a damaged knuckle, hub, or housing, and it keeps your technicians working safely with the AFF 852ASD on every type of job.
From the first bearing to the thousandth bushing, the AFF 852ASD gives your team a strong, safe, and convenient way to handle everyday pressing jobs. Its Super Duty features save time, its shield and gauge add confidence, and its included accessories mean you are ready to work immediately. Reach out to our team with any questions about air requirements, accessories, or delivery.
It is a press built for shops that value safety, speed, and dependable results, and it is backed by our team whenever you need advice on setup, accessories, or maintenance for years to come.
Frequently Asked Questions About the AFF 852ASD
What is the capacity?
30 tons.
Does it include adapters?
Yes, a 10-piece pin and bearing press adapter set and a two-piece press plate set.
Does it have a safety shield?
Yes, a shatter-resistant polycarbonate shield.
Can the head move side to side?
Yes, with the lateral head adjuster.
How is it powered?
By a double-pump air motor, with overload protection.
How many bed positions are there?
Seven.
Support From Ironside Garage
Our team can help you choose the right press capacity and accessories. Contact us with any questions about the AFF 852ASD.
Order the AFF 852ASD Today
The AFF 852ASD is a proven, powerful 30-ton Super Duty shop press. For workplace safety guidance, visit OSHA, and explore our car lifts to complete your shop.
Related products
Atlas SBC420 Standard Sandblast Cabinet with Vacuum
Atlas SBC420 Standard Sandblast Cabinet with Vacuum The Atlas® SBC420 sandblast cabinet features dual side doors and a large front door for easy loading and unloading. The lower hopper stores the abrasive material for reuse or easy removal. The SBC420 cabinet is always ready when you are. The cabine
Flo Dynamics TSD650LCD ATF Inline and Dipstick Exchanger
Flo-Dynamics TS410 ATF Inline Exchanger
Ranger RP-30FCH oil filter crusher
Ranger RP-30FCH oil filter crusher can apply 30,000 lbs. of crushing force against used oil filters that need to be completely drained of residual oil. It features a manual stainless-steel handle which is ergonomically placed on the side of the crusher to safely manage its two-way stop-and-start ope

Reviews
There are no reviews yet.