Atlas SBC990 Large Sandblast Cabinet with Vacuum

$3,649.00

Atlas SBC990 Large Sandblast Cabinet with Vacuum The Atlas SBC990 sandblast cabinet has many of the same features of the entry level Atlas® SBC420 blasting cabinet with added interior space and an extra large front/top loading door. That extra work space and larger opening allow the user to blast ev

SKU: IRG0525 Categories: ,
Description

The Atlas SBC990 is a large media blast cabinet with an attached vacuum, built for bigger parts. With a 46 x 34 x 33.5-inch work area, an extra-large front/top load door, and a foot-pedal-controlled blast gun, the SBC990 handles wheels, larger brackets, and bulky components in a clean, contained space.

Atlas SBC990 Large Sandblast Cabinet with Vacuum

Features and Benefits

Large Media Blasting Cabinet

Work area: 46” x 34” x 33 1/2”

Foot operated control valve

Heavy Duty blasting gun with replaceable ceramic nozzles

Self-contained dust collection system with cartridge filter and convenient bottom gate clean-out

Extra Large Front/Top Load Door

Extra nozzles and plastic protectors included

110V Power

Recommended media – Glass Bead (NOT INCLUDED)

Replacement Parts & Wear Items Always in Stock

This part number FREIGHT PREPAID

The Atlas SBC990 uses a powerful vacuum system to keep the work area free of “floating” rust and used media. After the glass bead contacts the surface to be cleaned, a portion of the bead is “destroyed” becomes almost weightless. The vacuum system removes the “floating” rust particles and the “used up” glass beads.

The Atlas SBC990 has a foot pedal that controls the flow of abrasives from the air gun. The foot pedal allows the operator to concentrate on the work to be done inside the cabinet rather than hold the trigger of a gun. The heavy duty blasting gun uses ceramic nozzles (easily replaceable) with a variety of hole sizes to provide the most effective blasting area.

 

Atlas SBC990 Sandblast Cabinet Specifications

Work Area: 46″ W x 34″ D x 33 1/2″ H

Overall Dimensions: 52 3/8″ W x 49″ D x 69 3/5″ H

Window Dimensions: 12 3/4″ x 27 1/4″

Gloves: 24″ Gauntlet

Power gun: NE490 Foot Pedal w/ Gun

Vacuum: Attached

Electric Requirement: 110volt

Air Requirement: 24 cfm/125 PSI (External Air Supply Required)

Shipping Weight: 500 lbs

 

SBC990 Specifications

  • Work area: 46″ W x 34″ D x 33.5″ H
  • Overall dimensions: 52 3/8″ W x 49″ D x 69 3/5″ H
  • Viewing window: 12 3/4″ x 27 1/4″
  • Gloves: 24-inch gauntlet
  • Power gun: NE490 with foot pedal
  • Vacuum: attached
  • Electrical: 110V
  • Air requirement: 24 CFM at 125 PSI (external air supply required)
  • Shipping weight: 500 lbs.

SBC990 Features

  • Large work area for bulky parts
  • Extra-large front/top load door
  • Foot-operated control valve
  • Heavy-duty blast gun with replaceable ceramic nozzles in a variety of hole sizes
  • Self-contained dust collection with cartridge filter
  • Bottom gate clean-out
  • Extra nozzles and plastic window protectors included
  • Recommended media: glass bead (not included)

Room for Bigger Parts

Standard cabinets can feel cramped when you’re working on wheels, large brackets, or engine components. The SBC990 offers a deep, tall work area of 46 x 34 x 33.5 inches, giving you space to maneuver larger parts and reach every surface. The extra-large front/top load door makes it easy to get bulky items in and out.

Powerful Vacuum Keeps the View Clear

When glass bead strikes a surface, some of it breaks down into fine, nearly weightless particles that float in the cabinet along with loosened rust. The SBC990’s powerful vacuum system removes that floating dust and spent media, keeping the work area clear so you can see what you’re doing. Cleaner air inside the cabinet also means better results and less wasted time.

Foot Pedal Control

A foot pedal controls the flow of abrasive from the gun, so you can focus on the work inside the cabinet rather than holding a trigger. That gives better control and reduces hand fatigue during long sessions.

Interchangeable Nozzles

The heavy-duty gun uses replaceable ceramic nozzles available in a variety of hole sizes. Choose a nozzle that suits the job to balance blasting area and air use. Extra nozzles come with the cabinet.

Who Should Buy the SBC990

  • Restoration shops working on larger components
  • Powder coating businesses
  • Wheel refinishing shops
  • Fabrication and welding shops
  • Truck and equipment repair shops
  • Serious hobbyists with a capable compressor

Explore more tools in our shop equipment section.

How to Use the SBC990

  1. Connect an air supply capable of 24 CFM at 125 PSI.
  2. Plug the vacuum into a 110V outlet and switch it on.
  3. Add glass bead or other suitable media.
  4. Load the part through the front/top door and close it.
  5. Insert your hands into the gloves and pick up the gun.
  6. Press the foot pedal to blast, moving the gun in smooth, overlapping passes.
  7. Release the pedal, allow the vacuum to clear the air, then unload.

SBC990 key specifications

Air Supply Requirements

The SBC990 needs 24 CFM at 125 PSI, which is more than smaller cabinets. Confirm your compressor can deliver that volume continuously at the required pressure. A compressor that falls short will cause pressure drops and slow blasting. Install a water separator or dryer to keep moisture out of the media.

Safety Guidelines

Keep the door closed while blasting and use the gloves at all times. Run the vacuum whenever you blast. Wear eye protection when loading and unloading, and follow local regulations for disposing of spent media and dust.

Maintenance Tips

  • Replace window protectors when they become cloudy.
  • Check nozzles for wear and replace as needed.
  • Clean or replace the cartridge filter regularly.
  • Inspect gloves and replace when worn.
  • Use the bottom gate to remove spent media.
  • Drain moisture from your air system daily.

SBC990 vs. Standard Cabinets

Atlas’s standard SBC420 cabinet offers a wide but shallower work area and runs on lower air consumption. The SBC990 adds depth and height to its work area and an extra-large front/top door for bulky parts, with a higher air requirement to match. If you regularly blast larger parts, the SBC990 is the better fit. If your parts are mostly small and your compressor is modest, the standard cabinet may suit you.

SBC990

Blasting Wheels

Wheel refinishing is one of the most common uses for a large cabinet. The SBC990’s deep, tall work area and extra-large door make it practical to blast many wheels, depending on size. Remove tires, weights, and valve stems first, mask any areas you want to protect, and blast in smooth passes, rotating the wheel to reach the barrel and spokes. Clean blasted wheels are ready for paint or powder coat, giving them a fresh, durable finish.

Prepping for Powder Coating

Powder coat needs a clean, profiled surface for strong adhesion. Blasting removes old coatings, rust, and contaminants in one step. The SBC990’s larger capacity lets powder coating shops prep bigger parts and more parts per batch, keeping their ovens and spray booths busy.

Restoration Projects

Restorers can use the SBC990 to clean suspension arms, brackets, hood hinges, valve covers, and other larger components that won’t fit comfortably in smaller cabinets. The vacuum keeps the view clear, and the foot pedal lets you work precisely around detailed areas.

Blasting Technique Tips

Hold the nozzle a few inches from the surface and keep it moving. Overlap your passes for an even finish. On thin sheet metal, avoid lingering in one spot to prevent warping. Rotate parts to reach every side, and use a smaller nozzle for detailed areas if needed. Good technique gives consistent, professional results.

Keeping Media Dry

Moisture causes media to clump and clog the gun. Use a water separator or air dryer, drain your compressor tank daily, and store media in a dry place. Replace media that becomes damp.

Planning Your Space

The SBC990 measures about 52 3/8 inches wide, 49 inches deep, and just under 70 inches tall. Choose a level location with room to open the large door and stage parts. Make sure a 110V outlet and your compressed air line are nearby. Good lighting helps when loading and inspecting parts.

SBC990 key features

Why a Large Cabinet Pays Off

Trying to force big parts into a small cabinet wastes time and leads to uneven results, because you can’t reach every surface. A larger cabinet like the SBC990 lets you position parts properly, rotate them easily, and blast every area evenly. That means fewer passes, less rework, and better finishes. For shops that handle a mix of small and large parts, the extra capacity quickly proves its worth.

Better Visibility, Better Results

Seeing clearly is essential for good blasting. The SBC990’s viewing window, combined with its powerful vacuum, helps you watch exactly where the media is hitting and spot any areas that still need attention. Replaceable window protectors keep the window from becoming etched over time. Change them when they cloud up to maintain good visibility.

Managing Dust and Spent Media

As media breaks down, it becomes dust that can cloud the cabinet and reduce cleaning efficiency. The SBC990’s vacuum and cartridge filter remove that fine material, keeping usable media in circulation and the air inside the cabinet clear. Clean or replace the filter regularly, and use the bottom gate to remove media when it’s worn out. Dispose of dust and spent media according to local regulations.

Fabrication and Equipment Repair

Fabricators and equipment repair shops often clean larger brackets, mounts, and housings before welding or painting. The SBC990’s generous interior accommodates many of these parts, and blasting removes mill scale, rust, and old paint for strong welds and long-lasting coatings.

What Users Appreciate

Users often highlight the roomy interior and the extra-large door as the SBC990’s best features. Loading heavy or awkward parts is easier, and there’s room to work around them. The powerful vacuum and foot pedal control also earn praise for making long blasting sessions more comfortable and productive.

Building an Efficient Blasting Workflow

Set up a simple flow around the SBC990. Stage dirty parts on a cart beside the cabinet, grouping them by size and the finish you want. Blast in batches, then move clean parts to a separate area where they can be blown off or washed to remove any remaining media. Keep spare nozzles, gloves, window protectors, and filters within reach. An organized workflow keeps the cabinet productive and helps your team turn around jobs faster.

SBC990 front view

Sizing Your Compressor Correctly

The most common reason a blast cabinet underperforms is an undersized compressor. The SBC990 requires 24 CFM at 125 PSI. Check the compressor’s delivered CFM at that pressure, not its peak or displacement rating. If your compressor can’t keep up, pressure will drop during blasting and media flow will suffer. Our team can help you confirm whether your compressor is a good match before you order.

Choosing Nozzle Sizes

Larger nozzles cover more area but use more air, while smaller nozzles use less air and give more precise control. With the SBC990’s interchangeable ceramic nozzles, you can choose the best size for each job and for your compressor’s capacity. Replace nozzles as they wear, since an enlarged opening increases air consumption and reduces blasting efficiency.

Investing in Quality Finishes

A paint or powder coat finish is only as good as the surface preparation beneath it. The SBC990 gives you a fast, consistent way to prepare larger parts, which leads to better adhesion and longer-lasting results. For restoration and coating businesses, that quality translates into happier customers and fewer comebacks.

SBC990 best uses

Truck and Equipment Parts

Truck and equipment repair shops often need to clean larger components such as brackets, mounts, brake parts, and housings. These parts don’t always fit in standard cabinets. The SBC990’s larger interior handles many of them, letting shops remove rust and grime before inspection, welding, or painting. Clean parts make it easier to spot cracks and wear, improving repair quality.

Motorcycle and Powersports Restoration

Motorcycle and powersports restorers can blast larger components like swingarms, triple clamps, and engine cases (with proper masking of machined areas). The SBC990’s extra-large door simplifies loading, and its roomy interior gives space to rotate and position parts for complete coverage.

Protecting Sensitive Surfaces

Not every surface should be blasted. Machined surfaces, bearing bores, threads, and sealing faces can be damaged by abrasive media. Mask these areas with tape, plugs, or caps before blasting, and clean parts thoroughly afterward to remove any media from passages and threads. Careful preparation protects parts and ensures they function correctly after refinishing.

Keeping the Cabinet in Top Shape

Regular care keeps the SBC990 performing well. Replace window protectors when they cloud, swap worn nozzles and gloves, clean or replace the filter, and keep media dry. Inspect the cabinet seals and door latches so dust stays inside. These simple steps help the cabinet deliver consistent results for years.

Getting Started

If you need a cabinet that handles larger parts, the SBC990 is a strong choice. Contact our team to confirm your air supply, choose media, and arrange delivery. We’ll help you get set up so you can start blasting larger parts right away.

A Typical Wheel Refinishing Job

A shop receives a set of corroded alloy wheels for refinishing. After removing the tires, weights, and valve stems, the technician masks the bead seats and center bore. One wheel at a time goes into the SBC990 through the extra-large door. With the vacuum running, the technician uses the foot pedal and gun to strip old paint and corrosion from the face, spokes, and barrel, rotating the wheel for full coverage. The vacuum keeps the cabinet clear so every area is visible. When all four wheels are clean, they’re blown off, inspected, and sent to the powder coating booth. The result is a like-new finish that customers love.

Home Garage Use

Serious hobbyists with a large garage and a capable compressor can also benefit from the SBC990. It runs on 110V power, and its sealed design with an attached vacuum helps keep dust contained. If your compressor can supply 24 CFM at 125 PSI, the SBC990 can turn weekend restoration projects into much faster, cleaner work. From brackets to wheels, it gives you professional-quality surface prep at home.

Whether you’re running a busy powder coating shop, restoring classic cars, or cleaning equipment parts, the SBC990 gives you the space, visibility, and control to do the job well. Its large interior, extra-large door, and powerful vacuum make blasting bigger parts practical and efficient. Reach out to our team at Ironside Garage with questions about compressors, media, or delivery, and we will help you get started.

Frequently Asked Questions About the SBC990

How big is the work area?

46 inches wide, 34 inches deep, and 33.5 inches high.

What air supply does it need?

24 CFM at 125 PSI from an external compressor.

Does it have a vacuum?

Yes, an attached vacuum with a cartridge filter.

What media is recommended?

Glass bead (not included).

How are parts loaded?

Through an extra-large front/top load door.

Support From Ironside Garage

Our team can help you confirm your compressor size, choose media, and arrange freight delivery of the SBC990. Contact us with any questions.

Order the SBC990 Today

The Atlas SBC990 is a proven, powerful large sandblast cabinet. Learn more on the official Atlas Automotive Equipment website, or explore our car lifts.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Atlas SBC990 Large Sandblast Cabinet with Vacuum”

Your email address will not be published. Required fields are marked *

Shipping & Delivery