Ranger RS-750D Truck Spray Wash Cabinet

$9,195.00

Ranger RS-750D Truck Spray Wash Cabinet

SKU: IRG0517 Categories: ,
Description

The Ranger RS-750D is an extra-tall truck spray wash cabinet with a 1,000-lb. load capacity, a 53-gallon tank, and a 54-inch inside height. Built for big car and truck components, the RS-750D uses hot water, detergent, and 22 nozzles to clean massive parts automatically, letting you wash more in fewer cycles.

Ranger RS-750D Truck Spray Wash Cabinet

Ranger’s Extra-Massive Hot Wash Spray Cabinet

Sometimes a product is designed so well, hardly anything needs to change. That’s how we felt about the RS-500D parts washer, but we also realized that some car and truck components are just too massive to fit in the cabinet. Plus, a larger enclosure means more parts can get washed in fewer cycles. That’s why we made the RS-750D, the 53-gallon, 1,000-lb. capacity parts washer to end all parts washers. This machine is truly massive.

It stands over 6’ tall and has that coveted look of power you want in your shop. It’s not just looks, of course. The RS-750D holds twice as much weight as the RS-500D and features a longer spray system to accommodate the increased size. That means a larger supply of bigger components gets just as clean as before. The only difference is that now you can save time by washing more stuff at a time.

Features

Heavy-duty steel construction

Safe aqueous operation: No harsh chemicals

53 gallon tank

Dual water heaters for quick startup

Heated cabinet w/ adjustable thermostat

High-power spray jets clean parts fast

Automatic low water shutoff

Removable tank screen

Stainless oil skimmer

Removable parts tree

Powder coat finish

Stainless steel nozzles

Full opening octagonal door

Large drain pipe

Heavy-duty casters

Friction-drive turntable system

Neoprene-sealed wash cabinet

Contamination-proof interior welds

Gasket-free door

Small parts basket

Stainless steel handles

Free bucket and soap included

Specifications

Overall height: 78″ (1,981 mm)
Inside height: 54″ (1,372 mm)
Inside width: 32″ (813 mm)
Turntable diameter: 30″ (762 mm)
Tank capacity: 53 gallons
Recommended floor space: 44″ x 43″ (1,118 mm x 1,092 mm)
Load capacity: 1,000 lbs. (454 kg)
Cycle timer: 0 – 60 minutes

Brass nozzles: 22
Steel construction: 12 Gauge / .109 thickness
Pump output: 70 psi @ 70 gpm
Motor: 1 HP / 220 VAC / 60 Hz / 1 Ph
Electric heater: 6 kW
Water temperature: 160° – 180° F (71° – 82° C)
Shipping weight: 746 lbs. (338 kg)
Shipping dimensions: 46” x 46” x 80” (1,168 mm x 1,168 mm x 2,032 mm)

RS-750D Specifications

  • Overall height: 78 inches
  • Inside height: 54 inches; inside width: 32 inches
  • Turntable diameter: 30 inches
  • Load capacity: 1,000 lbs.
  • Tank capacity: 53 gallons
  • Cycle timer: 0–60 minutes
  • Nozzles: 22
  • Pump output: 70 psi at 70 gpm
  • Motor: 1 HP, 220 VAC, 60 Hz, single phase
  • Electric heater: 6 kW
  • Water temperature: 160°–180°F
  • Steel construction: 12 gauge (.109″)
  • Recommended floor space: 44″ x 43″

RS-750D Features

  • Heavy-duty steel construction with powder coat finish
  • Safe aqueous operation with no harsh chemicals
  • Dual water heaters for quick startup
  • Heated cabinet with adjustable thermostat
  • Longer spray system for tall parts
  • Automatic low water shutoff
  • Removable tank screen and stainless oil skimmer
  • Removable parts tree and small parts basket
  • Full-opening octagonal, gasket-free door
  • Friction-drive turntable, neoprene-sealed cabinet, contamination-proof welds
  • Large drain pipe, heavy-duty casters, stainless steel handles
  • Free bucket and soap included

Built for Massive Parts

Ranger designed the RS-750D for components that are too big for standard cabinets. With a 54-inch inside height and a 1,000-lb. turntable capacity, it handles heavy truck transmissions, diesel engine blocks, large differentials, and more. Twice the weight capacity of the RS-500D means you can wash bigger parts or more parts in each cycle.

Longer Spray System

To match its taller cabinet, the RS-750D uses a longer spray system with 22 nozzles. That keeps cleaning even from the bottom to the top of tall parts, so big components come out just as clean as smaller ones.

Wash More in Fewer Cycles

A larger enclosure means you can load more parts at once. Instead of running several cycles to clean a full teardown, the RS-750D lets you clean more in a single load, saving time and energy.

Safe, Aqueous Cleaning

The RS-750D uses hot water and detergent rather than harsh solvents, reducing chemical exposure and odors for technicians and simplifying waste handling.

Who Should Buy the RS-750D

  • Heavy-duty truck and diesel repair shops
  • Fleet maintenance facilities
  • Engine and transmission rebuilders handling large units
  • Agricultural and construction equipment dealers
  • Bus and transit maintenance departments
  • Industrial maintenance teams

Explore more equipment in our shop equipment section.

RS-750D

RS-750D key specifications

How to Use the RS-750D

  1. Fill the 53-gallon tank and add spray-cabinet detergent.
  2. Turn on the dual heaters and set the thermostat to reach 160–180°F.
  3. Load heavy parts on the turntable with a hoist, keeping weight centered.
  4. Hang smaller parts on the parts tree or place them in the basket.
  5. Close the door, set the cycle timer, and start the wash.
  6. When finished, open carefully and unload hot parts with gloves.

Safety Guidelines

Use a hoist or crane to load heavy parts, and never exceed the RS-750D’s 1,000-lb. capacity. Water and parts are very hot, so wear heat-resistant gloves and eye protection. Keep the door closed during cycles, use a properly installed 220V supply, and follow Ranger’s instructions and local wastewater rules.

Maintenance Tips

  • Skim oil regularly with the stainless oil skimmer.
  • Clean the removable tank screen.
  • Drain and clean the tank periodically.
  • Check the 22 nozzles for clogs.
  • Inspect the turntable drive for smooth rotation.
  • Monitor the water level to avoid low-water shutoff.

RS-750D vs. RS-500D

The RS-500D is a proven parts washer with a 500-lb. capacity and 43-inch inside height. The RS-750D builds on that design with twice the weight capacity, a taller 54-inch interior, a slightly larger tank, and a longer spray system with more nozzles. If you regularly clean heavy truck components or want to wash more parts per cycle, the RS-750D is the better fit.

Saving Labor on Heavy Parts

Scrubbing a diesel block or heavy transmission case by hand can take hours. With the RS-750D, you hoist the part in, close the door, set the timer, and move on to other work. That hands-free cleaning frees technicians for billable tasks and helps heavy-duty shops keep work moving.

Diesel Engine Rebuilding

Diesel engines are big, heavy, and full of oil and soot. Cleaning blocks, heads, and housings before inspection is essential but time-consuming. The RS-750D’s tall interior and 1,000-lb. capacity make it practical to clean these large components in one cycle. Clean parts let rebuilders spot cracks, check wear, and measure accurately, leading to better rebuilds.

Heavy Truck Transmissions and Differentials

Heavy-duty transmission cases and differential housings are bulky and difficult to clean by hand. The RS-750D’s hot, high-volume spray removes grease and grime from every surface as the turntable rotates. Technicians get clean components ready for inspection and reassembly without hours of scrubbing.

RS-750D front view

Fleet Maintenance

Fleet shops service many vehicles and handle a constant stream of dirty parts. The RS-750D helps keep up by cleaning more parts per cycle and handling large components that smaller washers can’t. Less time spent cleaning means faster turnaround and less vehicle downtime.

Agricultural and Construction Equipment

Heavy equipment parts often come in coated with mud, grease, and debris. The RS-750D’s generous capacity and powerful spray tackle these tough jobs, helping dealers and repair shops inspect and repair parts quickly during busy seasons.

Planning Your Installation

The RS-750D stands 78 inches tall and needs about 44 x 43 inches of floor space. Plan for overhead clearance for loading, ideally with a hoist or crane nearby. Provide a 220V single-phase supply installed by a qualified electrician, and locate the washer near a suitable drain or plan for wastewater collection. Leave room in front for the full-opening door.

RS-750D cleaning features

A Typical Heavy-Duty Teardown

A diesel shop tears down a heavy truck engine. The block, heads, oil pan, timing cover, and brackets are covered in oil and soot. Using a shop crane, a technician lowers the block onto the RS-750D’s turntable and arranges the heads and covers around it. Smaller brackets go on the parts tree, and bolts go into the basket. With the door closed and the timer set, the washer runs while the technician inspects the crankshaft and camshaft. When the cycle ends, most of the teardown is clean in one load, ready for inspection and machining. That kind of efficiency can save hours on every rebuild.

Choosing Detergent

Use a detergent made for hot-water spray cabinets, following the manufacturer’s dilution guidance. Heavy-duty diesel grime may benefit from detergents formulated for tough soils. Check the solution regularly and refresh it as it becomes contaminated. A free bucket and soap are included to get you started.

Loading Tips for Big Parts

  • Use a hoist or crane for heavy components.
  • Center heavy parts on the turntable for balance.
  • Orient cavities so spray can reach inside.
  • Avoid blocking nozzles with stacked parts.
  • Stay within the 1,000-lb. capacity.

Preventing Flash Rust

Hot, freshly cleaned cast iron and steel can flash rust if left bare. Once parts are dry, apply a rust preventive or light oil to any parts that won’t be assembled right away.

RS-750D side view

What Users Appreciate

Users often say the RS-750D’s size is a game changer. Being able to wash heavy diesel and truck components that wouldn’t fit in a standard cabinet saves time and outsourcing costs. The dual heaters, gasket-free door, and oil skimmer make daily operation simple.

Why Aqueous Spray Cleaning

Solvent tanks require technicians to scrub parts by hand and expose them to harsh chemicals and fumes. Aqueous spray cabinets like the RS-750D use hot water and detergent instead. The cleaning happens automatically inside a sealed cabinet, keeping technicians away from the grime and chemicals. It’s a cleaner, safer, and more efficient approach, especially for shops dealing with large, heavily soiled parts every day.

Keeping the Shop Clean

Large parts carry a lot of grease and dirt. Cleaning them in open areas spreads mess around the shop. The RS-750D contains that mess within its neoprene-sealed cabinet, and the oil skimmer and tank screen capture oil and debris for proper disposal. A cleaner shop is safer and more pleasant to work in.

Water and Solution Management

Hot water evaporates, so check the level daily and top it up. The automatic low water shutoff protects the heaters and pump. Skim oil regularly, clean the tank screen, and change the solution when it becomes heavily contaminated, disposing of it according to local regulations. Clean solution means better results and longer component life.

Built to Last

Heavy-duty 12-gauge steel construction, a powder coat finish, contamination-proof interior welds, and heavy-duty casters make the RS-750D a long-term workhorse. Ranger designed it to handle the demands of heavy-duty shops day after day.

Training Technicians

Show technicians how to load heavy parts safely with a hoist, set the thermostat and timer, skim oil, and unload hot parts with proper protection. A short walkthrough is usually enough to get the whole team comfortable using the RS-750D.

RS-750D best uses

Bus and Transit Maintenance

Transit agencies maintain large fleets of buses with heavy engines, transmissions, and axles. Cleaning these components efficiently is key to fast, accurate repairs. The RS-750D’s large capacity and tall cabinet make it a strong fit for transit maintenance shops, helping technicians prepare parts for inspection quickly and keep buses in service.

RS-750D detail

Industrial Maintenance

Industrial facilities maintain gearboxes, pumps, motors, and housings that accumulate oil and grime. The RS-750D provides a safe, automated way to clean these components before inspection or rebuild, reducing manual labor and chemical exposure for maintenance teams.

Investing in Capacity

Outsourcing parts cleaning or spending hours scrubbing by hand costs money. A large spray wash cabinet like the RS-750D brings that work in-house and automates it. For heavy-duty shops, the savings in labor and turnaround time can make it one of the most valuable pieces of equipment on the floor.

Small Parts Organization

Even when washing big components, small parts matter. The removable parts tree and small parts basket keep brackets, covers, and hardware organized during the cycle, so everything from one job stays together for reassembly.

Getting Started

If your shop needs a parts washer that can handle massive components, the RS-750D is an excellent choice. Contact our team to confirm electrical, drainage, and loading requirements, ask about detergents, and arrange freight delivery. We’ll help you get set up so you can start cleaning big parts right away.

Comparing Cleaning Methods for Large Parts

Large components present a special challenge. Solvent tanks are often too small, and hand-scrubbing a diesel block can take an entire morning. Pressure washing outdoors can spread contaminated water and isn’t always allowed. Hot tanks require long soak times and careful chemical management. The RS-750D offers a practical alternative: an enclosed, automated system with enough room and capacity for big parts, using hot water and detergent to clean them thoroughly in a single cycle. For heavy-duty shops, that combination of capacity, convenience, and containment is hard to match.

Supporting Quality Repairs

Clean parts lead to better repairs. Technicians can see cracks, scoring, and wear that grime would hide. Machinists can measure accurately and avoid contaminating their equipment. Assemblers can work in a cleaner environment and reduce the risk of debris entering rebuilt components. By delivering consistently clean parts, the RS-750D supports higher-quality work from teardown to reassembly, and it helps shops stand behind every rebuild they deliver.

From diesel blocks and heavy transmissions to equipment housings and large brackets, the RS-750D gives heavy-duty shops the size, power, and convenience to clean big parts quickly and safely. Its tall cabinet, 1,000-lb. turntable, and longer spray system make it one of the most capable parts washers you can put on your shop floor. Reach out to our team at Ironside Garage with questions about setup, detergents, or delivery, and we’ll help you get started quickly.

Shops that add the RS-750D often find it quickly becomes the go-to machine for every heavy teardown, saving hours each week and keeping big repair jobs moving on schedule for their customers.

Contact us today to plan your RS-750D installation and delivery.

Built for the biggest jobs in the shop, this washer turns hours of hand scrubbing into a simple load, close, and walk-away routine that every technician on your team will appreciate from the very first heavy teardown.

Frequently Asked Questions About the RS-750D

What is the load capacity?

1,000 lbs. on a 30-inch turntable.

How tall is the inside?

54 inches, with a 32-inch inside width.

How big is the tank?

53 gallons.

How many nozzles does it have?

22.

What is the pump output?

70 psi at 70 gallons per minute.

What power does it need?

220 VAC, 60 Hz, single phase, with a 1 HP motor and 6 kW heater.

Support From Ironside Garage

Our team can help you plan electrical, drainage, and loading requirements and arrange freight delivery of the RS-750D. Contact us with any questions.

Order the RS-750D Today

The Ranger RS-750D is a proven, powerful truck spray wash cabinet. For guidance on wastewater handling, visit the U.S. EPA, and explore our car lifts for your heavy-duty bays.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Ranger RS-750D Truck Spray Wash Cabinet”

Your email address will not be published. Required fields are marked *

Shipping & Delivery