Ranger RS-500DS
$12,995.00
Ranger RS-500DS Get a deep clean with Ranger! This stainless steel 50-gallon capacity spray wash cabinet can rapidly degrease dirty parts, including larger trucks/SUV engine components. Have your parts shine like new with the RS-500DS.
Looking for a reliable parts washer? The Ranger RS-500DS delivers the durability, safety and ease of use that busy service bays demand. This page covers the Ranger RS-500DS features, specifications, installation planning and care so you can buy with confidence.
Ranger RS-500DS Features and Specifications
Ranger RS-500DS
Powerful, Safe and Rapid Hot Wash with a new Stainless-Steel Cabinet by Ranger
The RS-500DS is a new face with a completely stainless-steel construction, as well as top-of-the-line features! It also features all of the same components that made the RS-500D the amazing automotive parts washer it is, all with the additional rust-free stainless-steel construction. This high-quality steel is completely resistant to deterioration and the harmful effects of rust, so you can rest easy knowing this investment will stay with you for a very long time.
By utilizing an octagonal full-opening door, the RS-500DS will provide easier access to the turntable for loading and unloading parts. The RS-500DS sports simple operating controls, brass nozzles, a gasket-free door and a beefier, industrial-grade 70 gpm pump which demonstrates Ranger’s commitment to enhance performance and productivity. Ranger constructed the cabinet and door with heavy-duty 12-gauge steel and then coated it with an industrial two-step primer and powder coat finish. The automatic low-water shutoff includes audible and visual alarms.
Fast-acting dual water heaters ensure faster and safer cleaning. Plus, revised circuitry and a new electronics board ensure better all-around performance, durability, and improved operator convenience, which makes the RS-500DS a solid choice among professionals worldwide.
Fast-release door latch
The RS-500DS includes a swift-release door latch which comes built-in for technician convenience. The interlocking door helps make sure that the cleanser material remains free from contaminants and inside the tank, not your floor.
Neoprene door seal
The cabinet on the RS-500DS is sealed with a leak-proof neoprene door which creates an edge-to-edge seal. It also prevents water and steam from escaping. Keeping steam inside ends up creating an enhanced water retention which ends up improving cleaning efficiency.
Movable filter basket
The cabinet also includes a robust trap filter to secure large particles which are greater than 1/8”. The filter basket is removable for unfettered access to the cleansing solution tank and easy maintenance.
Multi-directional sprayers
This washer is equipped with industrial-strength multi-directional spray jets are located below, above and on the sides to wash away set-in grime.
Steel oil skimming system
Rangers Parts Washers include a stainless-steel oil skimmer which will miraculously separate oil and grime from the water to increase the viable longevity of the detergent solution cleanser. Oil and other contaminants are directed via downspout into holding containers.
Contamination-proof cabinet welds
The RS-500D features full perimeter welds on the inside shelf of the cabinet perfectly adjoin and seal the cabinet wash area from the detergent tank, which will keep unwanted debris from seeping directly into the recirculating tank below. Even microscopic debris that can clog the pump and spray nozzles will be redirected to the debris trap and filter, eliminating the chance of equipment downtime due to contamination.
Stainless steel nozzles
Rather than use pipe-tree and drilled holes, Ranger’s parts washers include replaceable spray nozzles which are made of stainless steel. These sprayer nozzles include a sharply articulated spray grid that gives users a high-quality cleaning experience and performance that doesn’t end up corroding your washer pieces.
Low water shutoff
To keep your parts washer in great condition for as long as possible, Ranger has developed them to include a low water cut-off switch which will eliminate equipment downtime due to heater and pump damage. An industrial-grade stainless steel float placed in the detergent tank will rise when the water tank is full, and it’ll gradually descend as water evaporates. Once the water levels are too low, the washer will shut off instantly. This will end up preventing irreversible pump-seal damage and heating coil burnout.
Dual heaters
This parts washer is equipped with two water heaters which will ensure your machine reaches optimal washing temperature within mere moments. A smaller, energy-efficient secondary heater acts as a detergent pre-warmer when it’s turned on in order to keep the water primed and ready for washing. During washing cycles, a larger primary heater will turn on immediately, which will quickly heat the cleaning solution for optimum cleaning efficiency.
NEMA-rated electrical panel
The RS-500D features a sealed, water-resistant, NEMA-rated electrical box which ends up playing a critical role in the electrical management of the parts washer. The well-organized electrical system includes easy to identify circuits for the breakers, a water tank thermostat, and timers for both oil skimmer and turntable operation. Smart circuitry will prevent nuisance breaker tripping and it’ll enhance overload/overheat detecting and protection. A proprietary audible and visual alarm will activate when the low-water sensor detects unsafe operating conditions. Once the water level becomes too low, the washer will remain inoperable until the water level is restored, and the button is reset by the operator.
Double-pole circuit breaker
The Eaton Cutler-Hammer 20/30-amp Quadplex Double-Pole Type BR Circuit Breaker boasts a 2-pole, 20-amp breaker for the heater. It also includes a separate 2-pole, 30-amp breaker for the motor and pump combination.
Non-marring casters
There are a few reasons to use urethane casters instead of steel. Urethane casters are hard, sturdy, and won’t damage your flooring. These casters are easy to lock and release, and weather and adverse shop conditions won’t impede the functionality and longevity of these casters.
Durable turntable
The system behind the parts washer turntable is friction-drive, which helps to eliminate potential motor damage by reducing the risk of component jamming within the cabinet.
Industrial casters and convenient tank drain
The heavy-duty rubber swivel casters also provide sensible maneuverability. Ranger parts washers include built-in pipe drains which eliminate sludge from the floor of the parts washer tank.
Safety switch and timer dial
A door switch will turn off the washing cycle while the door is opened, all while a variable 60-minute timer allows for different wash cycle times to be set manually.
Removable tree rack and components basket
The quick-mount parts tree rack and hanging component parts basket is perfect for the cleaning of smaller components. If you end up using the parts tree and basket in conjunction with parts on the turntable, you’ll end up being able to tackle more parts cleaning in less time. The center tree rack can easily be removed to allow for additional clearance.
Extra accessories come standard
When you purchase a Ranger parts washer, you’ll also receive a removable parts rack, a small parts basket, and also 25 lbs. of detergent.
Commercial-grade pump/motor combination
Each Ranger parts washer comes with a centrifugal pump which has been specially engineered for parts washing applications. The pump body is located at the rear of the cabinet and is comprised of 100% ductile cast iron, while silicon carbide seals protect all sensitive machinery within. Stainless steel impellers and screw nuts won’t even rust out on you, while Nitrile NBR O-rings and carbon steel brackets close out the incredibly efficient and sound design of the power unit.
Hot cleaning
Fast heating is accomplished via a nickel-based, alloy-sheathed heater element which has been specifically designed for heated parts washing applications.
Thermostat
An adjustable set point thermostat sports a heating range that can go up to 175°F.
Aluma-Klean soap removes oil, stains, and grease with ease
Aluma-Klean from Ranger is a mild parts cleaning soap which is designed to clean aluminum, stainless, and other delicate parts without whitening the surface. Aluma-Klean parts cleaning soap isn’t a solvent, but rather it’s a non-foaming, low pH, mild-alkali, water-soluble, powdered detergent which was specifically formulated for high pressure heated parts washing systems. Its incredible cleaning action removes grease, oil, baked on stains, carbon, protein, as well as some paints.
Features
- Heavy-duty stainless steel construction
- Safe aqueous operation: No harsh chemicals
- 50 gallon tank
- Dual water heaters for quick startup
- Heated cabinet w/ adjustable thermostat
- High-power spray jets clean parts fast
- Automatic low water shutoff
- Removable tank screen
- Stainless oil skimmer
- Removable parts tree
- Powder coat finish
- Stainless steel nozzles
- Full opening octagonal door
- Large drain pipe
- Heavy-duty casters
- Friction-drive turntable system
- Neoprene-sealed wash cabinet
- Contamination-proof interior welds
- Gasket-free door
- Small parts basket
- Stainless steel handles
- Free bucket and soap included
Specs
| Overall height: | 66″ (1,676 mm) |
|---|---|
| Inside height: | 43″ (1,092 mm) |
| Inside width: | 32″ (813 mm) |
| Turntable diameter: | 30″ (762 mm) |
| Tank capacity: | 50 gallons |
| Recommended floor space: | 44″ x 43″ (1,118 mm x 1,092 mm) |
| Load capacity: | 500 lbs. (227 kg) |
| Cycle timer: | 0 – 60 min |
| Brass nozzles: | 18 |
| Steel construction: | 12 Gauge / .109 thickness |
| Pump output: | 75 psi @ 70 gpm |
| Motor: | 1 HP / 220 VAC / 60 Hz / 1 Ph |
| Electric heater: | 6 kW |
| Water temperature: | 160° – 180° F (71° – 82° C) |
| Shipping weight: | 670 lbs. (304 kg) |
| Shipping dimensions: | 46″ x 46″ x 68″ (5155051 x 5155051 x 1,727 mm) |
Ranger RS-500DS Photos

Ranger RS-500DS at a Glance
- The Ranger RS-500DS is built for daily professional use.
- The Ranger RS-500DS is backed by manufacturer support and documentation.
- Our team can confirm shipping options for the Ranger RS-500DS to your location.
- The Ranger RS-500DS is a smart fit for shops upgrading their equipment.
- Every Ranger RS-500DS order includes help from our product specialists.
- The Ranger RS-500DS combines solid construction with simple operation.
- Ask us about accessories that pair well with the Ranger RS-500DS.
- The Ranger RS-500DS helps your team work faster and more safely.
Key Highlights of the Ranger RS-500DS
Here is a quick summary of what stands out on this parts washer:
- An adjustable set point thermostat sports a heating range that can go up to 175°F.
- Heavy-duty stainless steel construction
- Safe aqueous operation: No harsh chemicals
- Dual water heaters for quick startup
- Heated cabinet w/ adjustable thermostat
Why Shops Choose the Ranger RS-500DS
c => `Professional shops rely on purpose-built equipment, and the ${c.kw} fits that need. It handles a routine but important job with consistent results, freeing technicians to focus on billable repairs.`
Benefits of a Quality Parts Washer
The best parts washer is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.
Common Uses for the Ranger RS-500DS
c => `The ${c.kw} is a practical fit for auto repair shops, fleet maintenance facilities, quick lube centers and industrial workshops. It handles a routine task reliably so technicians can stay focused on higher-value work.`
Installation and Setup
c => `Set up the ${c.kw} on a stable, level surface with the clearance and utility connections listed in the manual. Review all operating instructions before first use and keep the area around the unit clear for safe operation.`
Safety and Maintenance Tips for the Ranger RS-500DS
c => `Follow the maintenance schedule in the manual for the ${c.kw}, keep it clean and inspect it regularly for wear. Always use proper personal protective equipment and keep untrained users away from the equipment.`
Buy the Ranger RS-500DS from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Part Washers to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right parts washer for your shop.
For product manuals, technical documentation and manufacturer details, visit the official Ranger website.
Ranger RS-500DS FAQs
Is the Ranger RS-500DS suitable for daily use?
Yes, it is designed for regular use in professional shop environments when maintained according to the manual.
Where can I find the full specifications?
The specifications are listed above. Contact our team for manuals or any details not shown on this page.
How is the Ranger RS-500DS shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the Ranger RS-500DS come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Related products
Atlas SBC1200 X-Large Sandblast Cabinet
Atlas SBC1200 X-Large Sandblast Cabinet with Dual Doors & Vacuum The Atlas SBC1200 sandblast cabinet takes many of the already great features of the Atlas® SBC990 blasting cabinet and doubles them. The SBC1200 sandblast cabinet has two, front and rear, extra large top open loading doors and features
Flo Dynamics TSD650LCD ATF Inline and Dipstick Exchanger
Flo-Dynamics PROMAX40 Heavy Duty ATF Inline Exchanger
Mahle CSP-75 75 Ton Shop Press
Mahle FluidPRO ATX-3 and Boost Transmission Fluid Exchange System
Mahle FluidPRO ATX-3 and Boost Transmission Fluid Exchange System FluidPRO equipment from MAHLE Service Solutions offers a range of choices in fluid exchange equipment. The ATX+Boost offers technicians fully-automatic operation with precise fluid measurement to maximize efficiency. The added feature
Portacool Apex 1200 Wi-Fi Enabled High Velocity Portable Evaporative Cooler for 1200 sq ft
Portacool Apex 1200 Wi-Fi Enabled High Velocity Portable Evaporative Cooler for 1200 sq ft Meet the Portacool APEX™ 1200—a game-changer for mid-sized spaces demanding serious cooling. Delivering a powerful 4,000 CFMs of airflow that spans up to 40 ft., this unit ensures consistent comfort across 1,2

Reviews
There are no reviews yet.