Bendpak TSP-5 Air Compressor 5 HP 80 Gallon Vertical Tank
$5,095.00
Bendpak TSP-5 Air Compressor 5 HP 80 Gallon Vertical Tank The TSP-5 Patriot Series Air Compressor, Made in USA The TSP-5 is one of BendPak’s most popular made in USA air compressor models. High-quality, slow running cast iron compressor pumps deliver proven longevity in the most demanding conditions
The BendPak TSP-5 is a 5 HP, 80-gallon vertical air compressor built for busy shops that need steady, dependable air. Its two-stage, twin-piston cast-iron pump delivers 17 CFM at 175 PSI with a continuous duty cycle, while running at a low 625 RPM for quieter operation at 72 dBA. The TSP-5 is made in the USA and is UL, CSA, and ASME certified, with dual drive belts, an inter-cooler and after-cooler for cooler, drier air, an electronic drain valve, and anti-vibration pads included.
This guide covers the TSP-5 specifications, how a two-stage compressor works, sizing, installation, maintenance, and common questions. If you are choosing an air supply for your shop equipment and car lifts, the BendPak TSP-5 is a strong option.
Bendpak TSP-5 Air Compressor 5 HP 80 Gallon Vertical Tank
Hydraulic pump
The two-stage, twin piston pump features splash lubrication for total reliability and a finned cylinder configuration that provides 360° cooling. Heavy‐duty, disc‐type valves are dependable and accessible without having to remove the cylinder head or perform other complicated valve maintenance procedures. A built‐in inter-cooler and air‐cooled after-cooler chill the air, resulting in reduced heat and condensation moisture.
Anti-vibration pads
This air compressor includes a set of four rugged, half-inch thick pads to ensure there’s virtually zero machine vibration during operation. The high-quality elastomer compound resists aging, compression set, water and oil.
Cooling fan
The TSP-5 Patriot air compressor operates at low temperatures and optimizes its efficiency for maximum air output. The pump runs at a lower speed, which also reduces noise in your shop or garage. When you finally decide which air compressor best fits your needs, take into account the overall lifetime maintenance costs. This is the “true cost” of owning anything.
Electric bills can accumulate quickly, and more horsepower means a higher bill. That’s exactly why the TSP-5 Elite is such a money-saver: it runs at a cool temperature and runs an efficient 5 HP motor that won’t cut deeply into your bottom line. Why get less when you can save more with the TSP-5 Elite by BendPak?
Features & Specs
Made in USA
UL, CSA, ASME certified
Extra-quiet, low-RPM pump
5 HP energy‐efficient motor
Pressure switch ensures efficient operation at all times with no wasted energy
Cast‐iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with pressed‐in sleeves
Cast‐iron Elite pump features simple splash lubrication for total reliability and a finned cylinder configuration that provides 360° cooling
Dual drive belts require less belt tension resulting in less load on pump bearings, longer belt life and low vibration
Fully‐enclosed belt guard
Anti-vibration pads included
Large surface area and cooling fins on cylinders and forced‐air after-cooler provides efficient heat dissipation for lower operating temperatures and dryer air. Compressor runs cooler, oil life is extended and maintenance is reduced
Precision honed cylinders increase efficiency and oil control
Oversized ductile iron crankshaft provides extra strength and longer wear
Tapered roller main bearings provide full contact and support of the crankshaft and needle‐type piston pin bearings properly distribute bearing loads
Precision balanced flywheel has forced‐air fan blades for optimum compressor cooling and life
Magnetic starter provides thermal overload protection and minimizes start loads providing long life and trouble‐free operation
ASME-rated safety valve protects the compressor from over pressure and safeguards the operator
Balanced flywheel and counterbalanced crankshaft provides vibration‐free operation
Readily accessible disc‐valves do not require disassembly of compressor piping for easy accessibility and reduced maintenance cost and downtime
Corrosion resistant tubing for coolers, separators and valves for longer life and reduced maintenance
High‐density, die‐cast aluminum alloy rods minimize reciprocating weight
Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap
Automatic pressure switch provides auto start and stop
Integrated pressure unloader valves are built into the intake valve assembly on the compressor head, reducing internal pump heat from initial start‐up compression
Pressure gauge with service valve
Oversize replaceable air filter
Motor
Pump
Tank
Dimensions
Shipping
BendPak TSP-5 Specifications
Motor
- Horsepower: 5 HP
- Motor RPM: 1,750
- Voltage: 208-230V AC, single phase, 60 Hz
- Amp draw: 24 amps
- Recommended breaker: 40 amp
- Noise: 72 dBA
Pump
- Style: 2-stage, 2-piston
- Pump RPM: 625
- Material: solid cast iron
- Duty cycle: continuous
- Air delivery: 17 CFM rated at 175 PSI
- Maximum pressure: 175 PSI
- Drive: belt drive, dual belts
- Lubrication: oil lubricated, with oil sight glass
Tank
- Orientation: vertical
- Size: 80 gallons
- Outlet: 3/4″ fitting
- Electronic drain valve: yes
- Certifications: UL, CSA, ASME
Shipping
- Shipping weight: 676 lbs. (306.6 kg)
- Shipping dimensions: 44″ x 40″ x 75″ (1,117 mm x 1,016 mm x 1,905 mm)
How a Two-Stage Compressor Works
A two-stage compressor squeezes air in two steps. In the first stage, a larger piston compresses outside air to a middle pressure. The air then passes through an inter-cooler, which removes some of the heat created by compression. In the second stage, a smaller piston compresses the cooled air to the final pressure, up to 175 PSI on the TSP-5.
Compressing in two stages is more efficient than trying to reach high pressure in a single step. Cooling the air between stages means the pump runs cooler and works less hard. After the second stage, the TSP-5’s air-cooled after-cooler chills the air again before it enters the tank. Cooler air holds less moisture, so less water condenses in your air lines and tools.
Why 17 CFM at 175 PSI Matters
CFM, or cubic feet per minute, tells you how much air a compressor delivers. PSI tells you the pressure. The TSP-5 delivers 17 CFM rated at 175 PSI. Many air tools are rated at 90 PSI, and a compressor that delivers strong CFM at high pressure has plenty of reserve for tools running at lower pressure.
High maximum pressure also matters for the 80-gallon tank. At 175 PSI, the tank stores more air than it would at a lower pressure, so the compressor cycles less often and tools have a larger reserve to draw from during heavy use.

Key Features of the TSP-5
Solid Cast-Iron Pump
The TSP-5’s pump and heads are solid cast iron. Cast iron is more stable under heavy workloads and does not warp from heat like aluminum cylinders with pressed-in sleeves. Precision-honed cylinders improve efficiency and oil control.
Continuous Duty Cycle
The pump is rated for a continuous duty cycle, which means it is built to handle long run times in a busy shop.
Low-RPM, Extra-Quiet Pump
The pump turns at just 625 RPM. Low pump speed reduces wear and noise, and the TSP-5 runs at 72 dBA.
Dual Drive Belts
Two drive belts share the load, so each needs less tension. That means less load on the pump bearings, longer belt life, and less vibration. A fully enclosed belt guard covers the belts and pulleys.
Inter-Cooler and After-Cooler
A built-in inter-cooler and an air-cooled after-cooler chill the air, reducing heat and condensation moisture. Large cooling fins on the cylinders and a forced-air fan on the flywheel help the compressor run cooler, which extends oil life and reduces maintenance.
Accessible Disc-Type Valves
Heavy-duty disc-type valves are dependable and can be reached without removing the cylinder head or disassembling compressor piping. That reduces maintenance time and cost.
Strong Rotating Assembly
An oversized ductile iron crankshaft adds strength and wear life. Tapered roller main bearings support the crankshaft, needle-type piston pin bearings distribute loads, and high-density die-cast aluminum alloy rods reduce reciprocating weight. A balanced flywheel and counterbalanced crankshaft keep vibration low.
Pressure Switch and Unloader Valves
An automatic pressure switch starts and stops the compressor as needed, so no energy is wasted. Integrated unloader valves in the intake valve assembly reduce pump heat from start-up compression.
ASME Safety Valve
An ASME-rated safety valve protects the compressor from over-pressure and safeguards the operator.
Electronic Drain Valve
An electronic drain valve automatically drains condensation from the tank, helping prevent rust and keeping moisture out of your air lines.
Anti-Vibration Pads Included
Four rugged, half-inch-thick elastomer pads reduce vibration. The pads resist aging, compression set, water, and oil.
Cast-Iron Oil Reservoir
The rugged cast-iron oil reservoir has a sight glass, a large oil drain, and a convenient fill cap, making oil checks and changes simple.
Made in the USA
The TSP-5 is made in the USA and certified to UL, CSA, and ASME standards.
What Can the TSP-5 Power?
With 17 CFM at 175 PSI and an 80-gallon tank, the TSP-5 is built to run a busy automotive shop. Common uses include:
- Impact wrenches and air ratchets
- Tire changers and wheel balancers
- Air-over-hydraulic jacks and lift locks
- Air sanders, grinders, and cut-off tools
- Paint guns and blow guns
- Fluid exchangers and other air-powered shop equipment
Check the CFM rating of each tool and add up the tools you expect to run at the same time. Leave some extra capacity so the compressor is not running at its limit all day.
Sizing a Compressor for Your Shop
Choosing the right compressor comes down to how much air you use and how often. A small home garage may only need a little air for occasional tool use. A professional shop with several technicians running impact guns, tire machines, and sanders needs much more. The TSP-5’s two-stage pump, continuous duty rating, and 80-gallon tank make it suited for steady professional use.
Think about future growth too. If you plan to add bays, lifts, or tire equipment, choosing a compressor with extra capacity now can save you from upgrading later.
Installation and Power Requirements
The TSP-5 runs on 208-230V AC, single phase, 60 Hz power. It draws 24 amps, and BendPak recommends a 40-amp breaker. Have a licensed electrician install the circuit and make the connection to meet local electrical codes.
Place the compressor on a solid, level concrete floor in a clean, dry, well-ventilated area. Use the included anti-vibration pads. Leave space around the compressor for airflow and service access. Good airflow helps the pump stay cool, and cooler air coming in means drier air going out.
Connect the 3/4-inch tank outlet to your shop air system with properly rated piping. Install a shutoff valve, a filter, and a water separator or dryer for best results. Plan drops near each bay so technicians have easy access to air.
The shipping weight is 676 lbs., so plan for a forklift or pallet jack at delivery and an easy path to the final location.


Understanding the Lifetime Cost
The price on the tag is only part of what a compressor costs. Electricity, oil, belts, filters, and repairs all add up over the years. A compressor that runs cooler and more efficiently can cost less to own over its life. The TSP-5’s low-RPM cast-iron pump, inter-cooler, after-cooler, and efficient 5 HP motor are designed to keep operating costs and wear down.
TSP-5 Maintenance Tips
- Check the oil daily using the sight glass, and change it on the schedule in the owner’s manual.
- Inspect the air filter and replace the oversize filter when it gets dirty.
- Check the belts for wear and proper tension.
- Confirm the electronic drain valve is working so condensation leaves the tank.
- Test the safety valve as the manual recommends.
- Keep cooling fins clean so the pump can shed heat.
- Check for air leaks in fittings and lines.
Routine care keeps the TSP-5 running cool and efficient and helps it deliver many years of service.
Compressed Air Safety
- Never exceed the tool or hose pressure ratings.
- Wear eye protection when using air tools and blow guns.
- Do not point compressed air at people or use it to clean skin or clothing.
- Shut off and drain pressure before servicing the compressor or air lines.
- Keep the belt guard in place at all times.
- Have all electrical work done by a qualified electrician.
OSHA’s hand and power tools resources cover safe use of pneumatic tools and compressed air in the workplace.
Saving Energy With Compressed Air
Compressed air is one of the most expensive forms of energy in a shop. Leaks, oversized pressure settings, and running the compressor when no one is working all waste power. Fix leaks quickly, set pressure only as high as your tools need, and turn the compressor off at the end of the day. The U.S. Department of Energy’s compressed air resources offer more tips for efficient systems.

Who Should Buy the BendPak TSP-5?
- Automotive repair shops
- Tire and wheel service centers
- Collision and body shops
- Fleet maintenance garages
- Fabrication and welding shops
- Serious hobbyists with large home garages
Setting Up a Shop Air System
A good compressor works best with a well-planned air system. Run main lines sized for the flow you need, slope them slightly so water drains toward drop legs, and install drains at low points. Add a filter, regulator, and lubricator where tools need them. A refrigerated air dryer can remove even more moisture for paint work. With the TSP-5’s after-cooler and electronic drain valve doing their part, a clean, dry air system protects your tools and gives better results.
Before you order, confirm that your building has 208-230V single phase power and room for a 40-amp breaker, and choose a clean, ventilated spot for the compressor. A little planning makes installation quick.
Frequently Asked Questions About the TSP-5
How much air does the TSP-5 deliver?
It delivers 17 CFM rated at 175 PSI.
What is the maximum pressure?
The maximum pressure is 175 PSI.
How big is the tank?
The vertical tank holds 80 gallons.
What power does it need?
It runs on 208-230V AC, single phase, 60 Hz, draws 24 amps, and BendPak recommends a 40-amp breaker.
How loud is it?
The TSP-5 runs at 72 dBA.
Is it rated for continuous duty?
Yes. The pump has a continuous duty cycle.
What kind of pump does it have?
It has a 2-stage, 2-piston, solid cast-iron pump that runs at 625 RPM.
Does it have an automatic drain?
Yes. It has an electronic drain valve.
Where is it made?
It is made in the USA and is UL, CSA, and ASME certified.
What is the shipping weight?
The shipping weight is 676 lbs. (306.6 kg).
Order the BendPak TSP-5 Today
The BendPak TSP-5 5 HP, 80-gallon two-stage air compressor gives your shop 17 CFM at 175 PSI, a continuous-duty cast-iron pump, quiet 72 dBA operation, and a long list of features built for reliability. Contact Ironside Garage with questions about power or installation, and browse our full range of shop equipment.
Related products
Atlas Extra Large Pressurized Sandblast Cabinet
Atlas Extra Large Pressurized Sandblast Cabinet The Atlas PSBC990 pressurized sandblast cabinet features a higher velocity stream that allows work to be done up to 4 times faster than other sandblast cabinets on the market. The direct pressure system which pneumatically pushes the blast media throug
Flo-Dynamics TS410 ATF Inline Exchanger
Ranger RP-30FCH oil filter crusher
Ranger RP-30FCH oil filter crusher can apply 30,000 lbs. of crushing force against used oil filters that need to be completely drained of residual oil. It features a manual stainless-steel handle which is ergonomically placed on the side of the crusher to safely manage its two-way stop-and-start ope

Reviews
There are no reviews yet.