Mahle CAJ-35 35 Ton Commercial Vehicle Axle Jack

$3,275.00

Mahle CAJ-35 35 Ton Commercial Vehicle Axle Jack

SKU: IRG0501 Categories: ,
Description

The Mahle CAJ-35 is a 35-ton air-hydraulic axle jack built for commercial vehicles such as heavy trucks, buses, and trailers. With a 70,000-lb. capacity, the CAJ-35 lifts axles quickly and safely in the shop or on the road. Its QuickLift feature raises the ram to the load faster, and the patented air ram retract feature resets the ram to its minimum starting height without reconnecting the hose. A Black Armor Coating protects the ram from rust and corrosion, and a field-ready design makes it ideal for road service work.

This guide covers the CAJ-35 specifications, how it works, where to use it, safe lifting, maintenance, and common questions. If you service heavy vehicles and need dependable shop equipment, the Mahle CAJ-35 is built for the job.

Mahle CAJ-35 35 Ton Commercial Vehicle Axle Jack

FEATURES

Unique QuickLift feature, internal design raises the ram to the load at a quicker rate of speed

Patented air ram retract feature allows the user to reset the ram back to minimum starting height without reconnecting the hose

Field ready design makes it ideal for road service work

Black Armor Coating™ protects ram from rust and corrosion to extend longevity of product

Distinctive anti-corrosive design protects the hydraulic system and extends product life

Product Specifications

Capacity: 70,000 lb (31,751 kg)

Required Air Pressure: 110 to 200 psi (7.7 to 13.8 bar)

Stroke: 5.1 in (13 cm)

Lift Pad Start Height: 9.3 in (24 cm)

Lift Pad Start Height w/ Adapter: 11.9 in (30 cm)

Screw Adjustment: 5 in (13 cm)

Length (Handle Horizontal): 71 in (180 cm)

Width at Wheels: 14.3 in (36 cm)

Overall Height (Handle Vertical): 58.5 in (149 cm)

Shipping Weight: 146 lb (66 kg)

Mahle CAJ-35 Specifications

  • Capacity: 70,000 lbs. (31,751 kg), or 35 tons
  • Required air pressure: 110 to 200 psi (7.7 to 13.8 bar)
  • Stroke: 5.1 inches (13 cm)
  • Lift pad start height: 9.3 inches (24 cm)
  • Lift pad start height with adapter: 11.9 inches (30 cm)
  • Screw adjustment: 5 inches (13 cm)
  • Length (handle horizontal): 71 inches (180 cm)
  • Width at wheels: 14.3 inches (36 cm)
  • Overall height (handle vertical): 58.5 inches (149 cm)
  • Shipping weight: 146 lbs. (66 kg)

What Is an Axle Jack?

An axle jack is a heavy-duty jack designed to lift commercial vehicles at the axle. Heavy trucks, buses, and trailers weigh far more than passenger cars, and their axles carry huge loads. A standard floor jack cannot handle that weight. An axle jack like the CAJ-35 combines air power with hydraulics to lift tens of thousands of pounds with little effort from the technician.

Technicians use axle jacks to raise a wheel end for tire changes, brake work, hub and bearing service, and suspension repairs. Once the axle is raised, it is supported on rated stands before any work begins.

Key Features of the CAJ-35

70,000-lb. Capacity

The CAJ-35 is rated for 70,000 lbs., or 35 tons. That capacity covers lifting the axles of many heavy trucks, tractors, buses, and loaded trailers. Always know the weight on the axle and stay within the rated capacity.

QuickLift Feature

Mahle’s unique QuickLift feature uses an internal design that raises the ram to the load at a quicker rate of speed. Instead of slowly pumping the ram up through empty space before it touches the axle, QuickLift closes the gap faster. That saves time on every lift, which adds up in a busy fleet shop or on a roadside call.

Patented Air Ram Retract

The patented air ram retract feature lets the user reset the ram back to its minimum starting height without reconnecting the hose. After a lift, the jack is ready for the next job quickly, with no extra steps.

Black Armor Coating

The ram is protected by Black Armor Coating, which guards against rust and corrosion and extends the life of the jack. That matters for a tool that may be used outdoors, in wet bays, or on salted winter roads.

Anti-Corrosive Hydraulic Design

A distinctive anti-corrosive design protects the hydraulic system and extends product life. Keeping corrosion out of the hydraulics helps the CAJ-35 lift smoothly for years.

Field-Ready Design

The CAJ-35 has a field-ready design that makes it ideal for road service work. At 146 lbs. with wheels and a long handle, it can be rolled into position next to a disabled truck or bus on the side of the road.

How the CAJ-35 Works

The CAJ-35 is an air-hydraulic jack. Compressed air at 110 to 200 psi powers an air motor that drives a hydraulic pump. The pump pushes fluid into the cylinder, which raises the ram and lift pad. Air does the hard work, so the technician does not need to pump a handle by hand to lift 35 tons.

Before the lift, the screw adjustment can be raised up to 5 inches to bring the lift pad closer to the axle. The QuickLift feature then raises the ram to the load quickly. Once the pad contacts the axle, the jack lifts the load through its 5.1-inch stroke.

The lift pad starts at 9.3 inches. With the adapter, the start height is 11.9 inches. Choose the setup that best fits the clearance under the axle.

When the job is done and the load is lowered, the air ram retract feature resets the ram to its minimum height without reconnecting the hose, so the jack is ready to roll out and use again.

Common Uses for the CAJ-35

  • Raising heavy truck axles for tire changes
  • Brake shoe, drum, and rotor service
  • Hub, seal, and wheel bearing work
  • Suspension and spring repairs
  • Bus and coach maintenance
  • Trailer axle service in yards and terminals
  • Roadside service for disabled trucks and buses

CAJ-35 key specifications

Choosing a Lift Point

Always lift at a point approved by the vehicle manufacturer. For axle jacks, this is usually directly under the axle near the wheel end, or at a point on the axle housing designed to carry the load. Do not lift on brake components, air lines, suspension parts not meant to carry the load, or thin sheet metal.

Center the lift pad under the lift point so the load sits evenly. A lift pad that is off center can let the load shift. If the pad does not sit squarely, lower the jack and reposition it before lifting.

Air Supply Requirements

The CAJ-35 needs 110 to 200 psi of compressed air. In the shop, connect it to an air drop with a hose and fitting sized to deliver full pressure. On the road, service trucks with onboard compressors can power the jack. Low pressure can slow lifting, so check pressure at the jack if it seems sluggish.

Keep moisture out of the air supply. Drain compressor tanks and use a water separator so water does not enter the air motor. Moisture in air tools can cause corrosion and poor performance.

Step-by-Step: Lifting an Axle With the CAJ-35

  1. Park the vehicle on a hard, level surface and set the parking brakes.
  2. Chock the wheels that will stay on the ground, on both sides.
  3. Connect the CAJ-35 to an air supply of 110 to 200 psi.
  4. Roll the jack under the axle at the approved lift point.
  5. Raise the screw adjustment, if needed, to bring the pad close to the axle.
  6. Use the controls to raise the ram. QuickLift brings the pad to the load quickly.
  7. Lift the axle slowly until the tire clears the ground or the needed height is reached.
  8. Place rated axle stands under the axle at a solid support point.
  9. Lower the axle onto the stands.
  10. Never work under a vehicle supported only by a jack.

When the work is complete, raise the axle off the stands, remove them, and lower the vehicle slowly. Use the air ram retract to reset the jack to its starting height.

Safety Tips for Heavy Vehicle Lifting

  • Never exceed the 70,000-lb. rated capacity.
  • Use the jack only on hard, level surfaces.
  • Always chock the wheels before lifting.
  • Support the vehicle on rated stands before working under it.
  • Keep hands and feet clear of the lift pad and load.
  • Lower loads slowly and in a controlled way.
  • Inspect the jack before each use for leaks or damage.
  • On the roadside, use warning triangles, cones, and reflective clothing.

Federal workplace rules cover safe use of jacks and lifting equipment. See OSHA’s hand and power tools resources for general guidance.

CAJ-35 Maintenance Tips

  • Check hydraulic oil. Keep oil at the level and type shown in the owner’s manual.
  • Inspect for leaks. Look at seals, fittings, and the ram before each use.
  • Protect the air motor. Use clean, dry air and follow the manual for air motor lubrication.
  • Clean the ram. Wipe off dirt and road grime to protect the Black Armor Coating.
  • Check wheels and handle. Make sure the jack rolls freely and the handle is secure.
  • Store properly. Store the jack with the ram retracted in a dry place.

CAJ-35

CAJ-35 key features

CAJ-35 for Road Service

Roadside truck and bus repairs call for tools that are tough, portable, and quick to set up. The CAJ-35’s field-ready design is made for this work. Wheels and a long handle let one technician roll the jack into position. The air-powered lift means the technician does not have to pump by hand on the shoulder of a busy road. QuickLift and the air ram retract feature cut the time spent on each lift, which helps get the vehicle back on the road and the technician out of traffic sooner.

The Black Armor Coating and anti-corrosive design protect the jack from rain, road spray, and salt. A tool that rides in a service truck year-round needs that kind of protection.

CAJ-35 in the Fleet Shop

In a fleet maintenance shop, the CAJ-35 speeds up routine work like tire rotations, brake jobs, and wheel-end service. Its 14.3-inch width at the wheels lets it fit between tires and suspension parts, and its 71-inch length with the handle horizontal gives the operator a safe distance from the load. When not in use, the handle can be raised to vertical, where the overall height is 58.5 inches, for compact storage.

For shops that also service light-duty vehicles, our car lifts can round out the service bays.

Who Should Buy the Mahle CAJ-35?

  • Heavy truck repair shops
  • Fleet maintenance departments
  • Bus and transit garages
  • Commercial tire dealers
  • Roadside and mobile service providers
  • Trailer repair and leasing companies
  • Municipal and public works garages

CAJ-35 vs. Manual Bottle Jacks

Some shops use large manual bottle jacks for trucks. Those jacks can be strong, but pumping one by hand to lift a heavy axle takes time and effort. They also lack features like QuickLift and air ram retract. The CAJ-35 lifts with air power, reaches the load faster, resets quickly, and rolls on wheels, making it the more efficient choice for shops and service trucks that lift heavy vehicles every day.

Getting the Most From Your CAJ-35

Train every technician on the CAJ-35 before use. Show them the controls, the screw adjustment, QuickLift, and the air ram retract feature. Review approved lift points for the trucks, buses, and trailers in your fleet. Keep rated axle stands next to the jack so they are always on hand.

Inspect the jack on a regular schedule and keep a simple log of checks and service. A well-maintained jack works smoothly and gives technicians confidence when lifting heavy loads.

CAJ-35 best uses

Understanding Start Height, Screw Adjustment, and Stroke

Three numbers decide how the CAJ-35 fits under a vehicle and how high it can lift. The start height is the height of the lift pad when the jack is fully lowered: 9.3 inches, or 11.9 inches with the adapter. The jack must fit under the axle at this height, so measure the clearance under your vehicles before you buy.

The screw adjustment lets you raise the lift pad up to 5 inches by hand before lifting. This closes the gap between the pad and the axle so more of the ram’s stroke is used for actual lifting. The stroke is how far the ram travels under power: 5.1 inches. Together, the screw adjustment and stroke give you the reach needed to raise most heavy truck and bus axles so the tires clear the ground.

Using the screw adjustment well makes each lift faster. Raise the screw until the pad is just below the axle, then let QuickLift and the hydraulic stroke do the rest.

Planning Heavy Vehicle Service

Heavy vehicle service goes more smoothly with the right equipment close at hand. Along with the CAJ-35, most shops keep rated axle stands, heavy-duty wheel chocks, wheel dollies for large tires, impact tools, and torque wrenches nearby. A clean, level floor with good lighting makes every lift safer. For road service, a well-organized truck with the jack strapped down securely saves time on every call.

Take time to write down a standard lifting procedure for your shop and post it near the jack. Clear steps help new technicians learn quickly and keep experienced technicians consistent.

Why Corrosion Protection Matters

Heavy-duty jacks often live in tough conditions. They sit in wet wash bays, ride in open service trucks, and work on roads covered in salt and slush. Rust on a ram can damage seals and lead to leaks, and corrosion inside the hydraulic system can cause rough or uneven lifting. The CAJ-35 addresses both problems with Black Armor Coating on the ram and an anti-corrosive design for the hydraulic system. That protection helps the jack keep working reliably season after season.

Frequently Asked Questions About the CAJ-35

What is the capacity of the CAJ-35?

The CAJ-35 is rated for 70,000 lbs. (31,751 kg), or 35 tons.

What air pressure does it need?

It requires 110 to 200 psi (7.7 to 13.8 bar).

What is the stroke?

The stroke is 5.1 inches (13 cm).

What is the starting height?

The lift pad starts at 9.3 inches (24 cm), or 11.9 inches (30 cm) with the adapter.

How much screw adjustment does it have?

The screw adjustment is 5 inches (13 cm).

What is QuickLift?

QuickLift is an internal design that raises the ram to the load at a quicker rate of speed.

What does the air ram retract do?

It resets the ram to its minimum starting height without reconnecting the hose.

How big is the CAJ-35?

It is 71 inches long with the handle horizontal, 14.3 inches wide at the wheels, and 58.5 inches tall with the handle vertical.

How much does it weigh?

The shipping weight is 146 lbs. (66 kg).

Is it good for road service?

Yes. Its field-ready design makes it ideal for road service work.

Order the Mahle CAJ-35 Axle Jack Today

The Mahle CAJ-35 35-ton commercial vehicle axle jack combines a 70,000-lb. capacity with QuickLift, air ram retract, and corrosion protection in a field-ready design. It is built for heavy truck shops, fleet garages, and road service crews. Contact Ironside Garage with questions, and browse our full range of shop equipment.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Mahle CAJ-35 35 Ton Commercial Vehicle Axle Jack”

Your email address will not be published. Required fields are marked *

Shipping & Delivery