Mahle CSJ-10A 10 Ton Service Jack Air Assist
$4,260.00
Mahle CSJ-10A 10 Ton Service Jack Air Assist A low start height combined with a high lift height accommodates a variety of vehicles. Heavy duty steel frame design stands up to the most vigorous shop use. Manual pump feature included. Large front wheels and long-life heavy duty rear swivel casters al
The Mahle CSJ-10A is a 10-ton air assist service jack built for heavy trucks, buses, RVs, and equipment. It lifts up to 20,000 lbs. from a 7-inch start height to a maximum height of 27 inches. The CSJ-10A runs on air, hydraulic, or manual power, using 90 to 175 psi shop air to make heavy lifts fast and easy. With a 93-inch overall reach, an 8-inch saddle, and heavy-duty casters, it rolls under large vehicles and puts the load where you need it. The CSJ-10A is 100% made in the USA.
This guide covers the CSJ-10A specifications, how it works, where to use it, safe lifting, maintenance, and common questions. If your shop handles heavy vehicles and needs serious shop equipment, the Mahle CSJ-10A is a strong choice.
Mahle CSJ-10A 10 Ton Service Jack Air Assist
Features and Benefits:
Min start height 7″
Max lift Height 27″
Air/Hydraulic powered (90-175PSI)
20,000 lb Capacity
100% USA Made
Product Specifications
Maximum Capacity 20,000 lb (9,072 kg)
Minimum Start Height 7 in (18 cm)
Maximum Lift Height 27 in (69 cm)
Power Air/Hydraulic/Manual
Required Air Pressure 90 to 175 psi (6.2 to 12.1 bar)
Chassis Dimensions (H x L) 10 in x 53.5 (25 cm x 136 cm)
Handle Length 47 in (119 cm)
Dimensions (W x L) 21.9 in x 101.8 in (56 cm x 259 cm)
Overall Reach 93 in (236 cm)
Front Caster Diameter 5 in (13 cm)
Rear Swivel Caster Diameter 4 in (10 cm)
Saddle Diameter 8 in (20 cm)
Front Width Caster to Caster 17.1 in (43 cm)
Rear Width Bracket to Bracket 20.1 in (51 cm)
Shipping Weight 410 lb (186 kg)
Mahle CSJ-10A Specifications
- Maximum capacity: 20,000 lbs. (9,072 kg), or 10 tons
- Minimum start height: 7 inches (18 cm)
- Maximum lift height: 27 inches (69 cm)
- Power: air/hydraulic/manual
- Required air pressure: 90 to 175 psi (6.2 to 12.1 bar)
- Chassis dimensions (H x L): 10 in. x 53.5 in. (25 cm x 136 cm)
- Handle length: 47 inches (119 cm)
- Overall dimensions (W x L): 21.9 in. x 101.8 in. (56 cm x 259 cm)
- Overall reach: 93 inches (236 cm)
- Front caster diameter: 5 inches (13 cm)
- Rear swivel caster diameter: 4 inches (10 cm)
- Saddle diameter: 8 inches (20 cm)
- Front width, caster to caster: 17.1 inches (43 cm)
- Rear width, bracket to bracket: 20.1 inches (51 cm)
- Shipping weight: 410 lbs. (186 kg)
- Made in: USA
What Is a 10-Ton Service Jack?
A service jack is a rolling floor jack built for professional shops. Unlike light-duty car jacks, a heavy-duty service jack like the CSJ-10A is made to lift medium- and heavy-duty vehicles. Its long chassis, big casters, and long reach let it roll under trucks and buses to reach lift points far under the vehicle.
The CSJ-10A is rated for 20,000 lbs. That capacity covers lifting one axle or one end of many medium-duty trucks, buses, motorhomes, and pieces of equipment. It gives shops a fast, flexible way to raise heavy vehicles for tire, brake, and suspension work.
Key Features of the CSJ-10A
20,000-lb. Capacity
With a 10-ton rating, the CSJ-10A handles loads far beyond a typical floor jack. Always know the weight at the lift point and stay within the rated capacity.
7-Inch to 27-Inch Lift Range
The CSJ-10A starts at 7 inches and lifts to 27 inches. The low start height lets it fit under many trucks and buses, and the tall maximum height raises axles high enough to remove large tires and to place stands.
Air, Hydraulic, or Manual Power
The CSJ-10A can be powered three ways. Connect shop air at 90 to 175 psi for fast air assist lifting, or operate the jack manually when air is not available. Air assist saves technicians time and effort, especially when lifting heavy loads many times a day.
93-Inch Overall Reach
The overall reach of 93 inches lets the jack reach lift points deep under a vehicle while the operator stands safely outside it. The 47-inch handle gives good leverage and control.
Heavy-Duty Casters
Five-inch front casters and four-inch rear swivel casters let the 410-lb. jack roll and steer across the shop floor. The rear swivel casters make it easier to line the saddle up under the lift point.
8-Inch Saddle
The 8-inch diameter saddle gives a broad contact area under axles and frame points, helping the load sit securely during the lift.
100% USA Made
The CSJ-10A is 100% made in the USA.
How the CSJ-10A Works
The CSJ-10A uses a hydraulic cylinder to raise its lift arm and saddle. When connected to shop air at 90 to 175 psi, an air-powered pump drives the hydraulics, so the operator can raise the load quickly without pumping by hand. When air is not available, the jack can be operated manually with the handle.
As the cylinder extends, the lift arm swings up and the saddle rises from 7 inches to as high as 27 inches. The long chassis and casters let the jack roll slightly as it lifts, which helps keep the saddle under the lift point. To lower the load, the operator uses the release control to let fluid return slowly and bring the saddle down in a controlled way.
Common Uses for the CSJ-10A
- Lifting medium- and heavy-duty truck axles for tire changes
- Brake and wheel-end service on trucks and buses
- Suspension and spring work
- RV and motorhome maintenance
- School bus and transit fleet service
- Lifting construction and agricultural equipment
- Supporting components during heavy repairs

Choosing a Lift Point
Always lift at a point approved by the vehicle manufacturer, such as under the axle near the wheel end or at a designated frame point. Do not lift on brake parts, air lines, fuel tanks, or suspension parts not designed to carry the load. Center the 8-inch saddle under the lift point so the load sits evenly. If the saddle does not sit squarely, lower the jack and reposition it.
Medium- and heavy-duty vehicles carry their weight unevenly. Know the weight on the axle or corner you plan to lift and make sure it stays within the 20,000-lb. capacity.
Step-by-Step: Lifting a Truck With the CSJ-10A
- Park the vehicle on a hard, level surface and set the parking brake.
- Chock the wheels that will stay on the ground.
- Connect the CSJ-10A to shop air at 90 to 175 psi, or prepare to lift manually.
- Roll the jack under the vehicle and center the saddle under the approved lift point.
- Raise the saddle until it contacts the lift point, then check the position.
- Lift slowly to the height needed, up to 27 inches.
- Place rated jack stands under a solid support point.
- Lower the vehicle onto the stands.
- Never work under a vehicle supported only by a jack.
When the job is done, raise the vehicle off the stands, remove them, and lower the load slowly.
Safety Tips for Heavy-Duty Service Jacks
- Never exceed the 20,000-lb. rated capacity.
- Use the jack only on hard, level floors.
- Always chock the wheels before lifting.
- Support the vehicle on rated stands before working under it.
- Keep hands and feet clear of the saddle, lift arm, and casters.
- Lower loads slowly and with control.
- Inspect the jack before each use for leaks or damage.
- Disconnect the air supply before servicing the jack.
For general workplace guidance on using tools and lifting equipment, see OSHA’s hand and power tools resources.
CSJ-10A Maintenance Tips
- Check hydraulic oil. Keep oil at the level and type listed in the owner’s manual.
- Inspect for leaks. Look at seals, hoses, and fittings before each use.
- Use clean, dry air. Drain compressor tanks and use a water separator to protect the air pump.
- Lubricate moving parts. Grease pivot points and casters as the manual recommends.
- Check the casters. Make sure the front and rear casters roll and swivel freely.
- Inspect the saddle. Check for wear or damage.
- Store properly. Store the jack fully lowered in a clean, dry spot.
CSJ-10A vs. Bottle Jacks and Axle Jacks
Bottle jacks are compact and strong, but they must sit directly under the lift point and often start too high for low-clearance vehicles. Axle jacks are great for very heavy loads but have short reach. The CSJ-10A combines a 20,000-lb. capacity with a 93-inch overall reach and a 7-inch start height. It can roll deep under a vehicle, lift high, and move from bay to bay on its casters. For shops that need flexibility, a heavy-duty service jack is often the most useful lifting tool on the floor.
Who Should Buy the Mahle CSJ-10A?
- Heavy and medium-duty truck repair shops
- Fleet maintenance garages
- Bus, transit, and school bus shops
- RV dealers and service centers
- Commercial tire shops
- Equipment dealers and rental companies
- Municipal and public works garages


Understanding the CSJ-10A Dimensions
A heavy-duty service jack needs room to work. The CSJ-10A measures 21.9 inches wide and 101.8 inches long overall with the handle, and the chassis is 10 inches high and 53.5 inches long. The front casters are 17.1 inches apart, and the rear brackets are 20.1 inches apart. Before you buy, check that your bays have space to roll the jack in and out and to swing the handle.
The 10-inch chassis height matters for clearance. Make sure the chassis can roll under the bumpers, steps, and fairings on your vehicles to reach the lift point. The 7-inch saddle start height lets it get under many axles and frames once the chassis is in position.
Air Supply Tips
For air assist operation, the CSJ-10A needs 90 to 175 psi. Use a hose and fittings that deliver full pressure, and keep moisture out of the line with a water separator. Drain your compressor tank regularly. Low pressure will slow lifting, so check the pressure at the jack if it seems sluggish. If air is not available, the manual mode lets you keep working.
Getting the Most From Your CSJ-10A
Train every technician on the CSJ-10A controls and safe lifting steps before use. Keep rated jack stands near the jack so they are always on hand. Post a simple checklist near your heavy vehicle bays: level floor, chocks, correct lift point, stands before working, and slow lowering. Inspect the jack on a schedule and keep a log of checks and service.
If your shop also services cars and light trucks, our car lifts can round out your bays and free up the CSJ-10A for heavy work.
Why Air Assist Saves Time
Lifting a 10-ton load by hand takes many strokes of the handle. On a busy day, that adds up to a lot of time and fatigue. Air assist lets the CSJ-10A do that work with shop air, so technicians can lift faster and save energy for the repair itself. Over a year, the time saved on every tire change, brake job, and suspension repair can be significant for a fleet or truck shop.
Using the CSJ-10A for Tire Service
Truck and bus tires are large and heavy, and changing them is one of the most common jobs in a fleet shop. The CSJ-10A’s 27-inch maximum lift height gives plenty of room to raise a heavy axle so the tires clear the floor. Its long reach lets technicians position the jack under the axle while standing outside the vehicle’s footprint.
Once the axle is up and supported on stands, a wheel dolly makes it easier to remove and install heavy wheels. After the new tire is mounted and torqued to spec, raise the axle slightly with the CSJ-10A to remove the stands, then lower it slowly to the floor.

Using the CSJ-10A for Brake and Suspension Work
Brake work on trucks and buses often requires lifting a wheel end off the ground so the drum, rotor, shoes, or pads can be serviced. Suspension work may call for raising the frame to take load off springs or air bags. The CSJ-10A handles both kinds of jobs. Lift at the approved point, support the vehicle on stands, and then complete the repair.
For suspension jobs, plan the lift carefully. Raising the frame changes how weight is carried, so place stands at points that will stay stable while parts are removed. Follow the vehicle manufacturer’s service procedures for each job.
Built for Daily Shop Use
A heavy-duty service jack in a busy shop may be used dozens of times a week. The CSJ-10A is built for that kind of daily work, with a long, sturdy chassis, large casters, and an 8-inch saddle. The 410-lb. shipping weight reflects its heavy construction. Routine inspections and good air supply habits help it deliver reliable lifting year after year.
Planning Your Heavy Vehicle Bay
A well-planned heavy vehicle bay makes every lift safer and faster. Keep a clear path for the CSJ-10A to roll in and out, store rated jack stands and wheel chocks nearby, and install an air drop close to where the jack is used. Good overhead lighting and a clean, level floor reduce the chance of slips and positioning mistakes.
Manual Backup When Air Is Not Available
Air assist is the fastest way to use the CSJ-10A, but shops do not always have air where they need it. A compressor may be down for service, or a vehicle may be parked away from the nearest air drop. Because the CSJ-10A can also be operated manually, work does not have to stop. Technicians can use the handle to raise the load, then switch back to air assist when it is available again. This flexibility is one reason air/hydraulic/manual jacks are popular in fleet and heavy truck shops.
Frequently Asked Questions About the CSJ-10A
What is the capacity of the CSJ-10A?
The CSJ-10A has a maximum capacity of 20,000 lbs. (9,072 kg), or 10 tons.
What is the lift range?
It starts at 7 inches (18 cm) and lifts to a maximum of 27 inches (69 cm).
How is it powered?
It is air/hydraulic/manual powered.
What air pressure does it need?
It requires 90 to 175 psi (6.2 to 12.1 bar).
What is the overall reach?
The overall reach is 93 inches (236 cm).
How long is the handle?
The handle is 47 inches (119 cm) long.
What size are the casters?
The front casters are 5 inches and the rear swivel casters are 4 inches in diameter.
How big is the saddle?
The saddle is 8 inches (20 cm) in diameter.
How much does it weigh?
The shipping weight is 410 lbs. (186 kg).
Where is the CSJ-10A made?
It is 100% made in the USA.
Order the Mahle CSJ-10A Service Jack Today
The Mahle CSJ-10A 10-ton air assist service jack gives your shop a 20,000-lb. capacity, a 7- to 27-inch lift range, and a 93-inch reach in a rugged, USA-made design. With air, hydraulic, or manual operation, it is ready for heavy truck, bus, RV, and equipment work. Contact Ironside Garage with questions, and browse our full range of shop equipment.
Related products
Atlas Automotive Equipment Spray Wash Cabinet
Atlas Automotive Equipment Spray Wash Cabinet The Atlas 500 Spray Wash Cabinet is the ideal parts washer for any automotive repair shop. The 1,000 lb. capacity turntable is strong enough for any size auto or light truck engine. The cut-away sides under the door allow you to wheel your engine crane r
Atlas SBC420 Standard Sandblast Cabinet with Vacuum
Atlas SBC420 Standard Sandblast Cabinet with Vacuum The Atlas® SBC420 sandblast cabinet features dual side doors and a large front door for easy loading and unloading. The lower hopper stores the abrasive material for reuse or easy removal. The SBC420 cabinet is always ready when you are. The cabine
Atlas SBC990 Large Sandblast Cabinet with Vacuum
Atlas SBC990 Large Sandblast Cabinet with Vacuum The Atlas SBC990 sandblast cabinet has many of the same features of the entry level Atlas® SBC420 blasting cabinet with added interior space and an extra large front/top loading door. That extra work space and larger opening allow the user to blast ev
BendPak Bender
BendPak Bender heavy-duty “Blue-Bullet” exhaust pipe bender. This high-quality bender takes off like a shot and helps you reach your production target every time. Your purchase of the BB-2 comes complete with a die package and a dual-function end-finishing unit for precision OE expansions and flares

Reviews
There are no reviews yet.