Flo-Dynamics C-VAC3 Drain and Fill plus Inline Flush Coolant Service Machine
$4,377.00
Flo-Dynamics C-VAC3 Drain and Fill plus Inline Flush Coolant Service Machine
The Flo-Dynamics C-VAC3 is one machine for multiple coolant services. It rapidly drains and fills from the radiator mouth using the vacuum and fill process, quickly and thoroughly flushes and exchanges coolant inline, drains the system for component changes, and pressure tests both the cooling system and radiator cap. An easy control panel, a pressure/vacuum gauge, automatic tank shutoff with indicator, and quick seal connectors that keep fluid in the hoses make the C-VAC3 clean and simple to use.
This guide covers the C-VAC3 specifications, each service it performs, setup, maintenance, and common questions. If you want versatile shop equipment for coolant work, the C-VAC3 covers it all in one cart.
Flo-Dynamics C-VAC3 Drain and Fill plus Inline Flush Coolant Service Machine
One machine, multiple services
Rapidly DRAIN/FILL from radiator mouth using the vacuum and fill process
Quickly and thoroughly flush and exchange coolant
Easy to use control panel
Quick seal connectors keep fluid inside hoses rather than on the floor
Drain for component change
Features
Perform a pressure test on the system and radiator cap
Includes Step Adapters: 1-1/8”, 1-3/8”, 1-1/2”, 1-3/4” with matching hoses
Automatic new and waste fluid tank shutoff with indicator
Pressure/vacuum gauge
Includes accessory kit (40100072)
Optional Pressure Reducer (40100154) reduces to a working pressure compatible with EV cooling systems.
SPECIFICATIONS: C-VAC3
Dimensions: 52” H x 23” W x 27” D
Weight: 159 lb.
New Fluid Tank: (2) 7 gallons
Waste Fluid Tank: 8 gallons
Power: 12V DC and shop air
Flo-Dynamics C-VAC3 Specifications
- Dimensions: 52″ H x 23″ W x 27″ D
- Weight: 159 lbs.
- New fluid tanks: two 7-gallon tanks
- Waste fluid tank: 8 gallons
- Power: 12V DC and shop air
- Step adapters included: 1-1/8″, 1-3/8″, 1-1/2″, and 1-3/4″ with matching hoses
- Gauge: pressure/vacuum
- Accessory kit included: 40100072
- Optional: pressure reducer 40100154 for EV cooling systems
One Machine, Multiple Services
Most shops need to do more than one kind of coolant work. Some jobs call for a full exchange, some for a drain and fill after a repair, and some for diagnosing a leak. The C-VAC3 handles all of them:
- Vacuum drain and fill. Rapidly drain and fill from the radiator mouth using the vacuum and fill process.
- Inline flush and exchange. Quickly and thoroughly flush and exchange coolant.
- Drain for component change. Drain the system before replacing a radiator, water pump, hose, or thermostat.
- Pressure test. Test the cooling system and the radiator cap for leaks.
Having all four services on one cart saves floor space and lets technicians move from diagnosis to repair to refill without switching machines.
Key Features of the C-VAC3
Vacuum Drain and Fill
The C-VAC3 connects to the radiator mouth and pulls a vacuum on the cooling system. The vacuum removes old coolant and air. New coolant is then drawn into the system to fill the space, leaving fewer air pockets than a gravity fill.
Inline Flush and Exchange
Using the included step adapters and hoses, the C-VAC3 connects inline with the cooling system to flush and exchange coolant quickly and thoroughly.
Pressure Test
The C-VAC3 can pressure test the cooling system and the radiator cap. Finding leaks before refilling saves coolant and helps prevent comebacks.
Automatic Tank Shutoff With Indicator
Automatic shutoff on the new and waste fluid tanks, with an indicator, helps prevent overfilling the waste tank or running a new fluid tank dry.
Quick Seal Connectors
Quick seal connectors keep fluid inside the hoses rather than on the floor, so connecting and disconnecting stays clean.
Easy Control Panel and Gauge
An easy-to-use control panel and a pressure/vacuum gauge help technicians run each service and monitor the system.
Step Adapters and Accessory Kit
Step adapters in 1-1/8″, 1-3/8″, 1-1/2″, and 1-3/4″ sizes come with matching hoses, and an accessory kit (40100072) is included.
Optional EV Pressure Reducer
An optional pressure reducer (40100154) reduces pressure to a working level compatible with EV cooling systems, so the C-VAC3 can be used on electric vehicles that need lower pressure.
Why Coolant Service Matters
Engine coolant does more than keep an engine from overheating. It also protects against freezing and helps prevent corrosion inside the radiator, water pump, heater core, and engine passages. Over time, coolant breaks down and loses its protective additives. Old coolant can lead to corrosion, scale, and overheating.
Vehicle makers recommend replacing coolant at set intervals. A coolant exchanger like the C-VAC3 replaces old coolant more completely than a simple drain and fill, because it moves fluid through the whole system rather than only draining what is in the radiator.
Why Removing Air Matters
Air trapped in a cooling system can cause hot spots, erratic temperature readings, poor heater output, and overheating. Many modern vehicles have long hose runs and high points that make air hard to bleed out by hand. The C-VAC3’s vacuum fill removes air first, then draws coolant in, so the system fills more completely and with less bleeding time.

Setting Up the C-VAC3
The C-VAC3 stands 52 inches tall, 23 inches wide, and 27 inches deep, and weighs 159 lbs. Place it near your service bays where shop air is available. Fill the two 7-gallon new fluid tanks with your most common coolant types and label each one. Make sure the 8-gallon waste tank is empty. Keep the step adapters, hoses, and accessory kit with the machine so they are easy to find.
Connect shop air and the 12V DC power source according to the Flo-Dynamics instructions. If you service EVs, install the optional pressure reducer as directed for those vehicles.

Step-by-Step: Vacuum Drain and Fill
- Let the engine cool before opening the cooling system.
- Confirm the correct coolant type and select the matching new fluid tank.
- Connect the C-VAC3 to the radiator mouth.
- Connect shop air and 12V DC power.
- Use the control panel to pull a vacuum and drain the old coolant into the waste tank.
- Watch the pressure/vacuum gauge to confirm the system holds vacuum.
- Fill the system with new coolant.
- Disconnect and follow the vehicle maker’s procedure for final checks.
Step-by-Step: Inline Flush and Exchange
- Choose the step adapter that fits the vehicle’s hose: 1-1/8″, 1-3/8″, 1-1/2″, or 1-3/4″.
- Connect the matching hoses inline with the cooling system.
- Use the control panel to run the flush and exchange.
- Monitor the gauge and tank indicators.
- Disconnect using the quick seal connectors and restore the hose connections.
- Check the coolant level and bleed as the vehicle maker requires.
Step-by-Step: Pressure Testing
- Connect the C-VAC3 to the cooling system as directed in the manual.
- Apply test pressure using the control panel.
- Watch the pressure/vacuum gauge for any drop that could mean a leak.
- Test the radiator cap to confirm it holds pressure.
- Release pressure before disconnecting.
Safety Tips
- Wear gloves and eye protection when working with coolant.
- Let a hot engine cool before opening the cooling system.
- Keep coolant away from children and pets. It can be toxic if swallowed.
- Clean up spills right away to prevent slips.
- Store new and used coolant in labeled containers.
- Train all technicians on the machine before use.
For chemical handling and labeling rules, see the OSHA hazard communication standard.

Handling Used Coolant
Used engine coolant can contain heavy metals and other contaminants picked up from the engine. It should never be poured down a drain or onto the ground. Store used coolant in labeled, closed containers and recycle it or dispose of it through an approved service. The EPA hazardous waste generator guidance and your local rules explain how shops should manage automotive fluids.
C-VAC3 Maintenance Tips
- Empty the waste tank before it fills.
- Rinse the new fluid tanks when changing coolant types.
- Inspect hoses, adapters, and quick seal connectors for wear or leaks.
- Check the tank shutoff indicator works correctly.
- Use clean, dry air to protect the machine.
- Keep the gauge clean and readable.
- Check the wheels and handle so the cart moves easily.
Signs a Vehicle Needs Coolant Service
Technicians and service advisors can look for several signs that a cooling system needs attention:
- The vehicle has reached the coolant service interval in its maintenance schedule.
- The coolant looks rusty, cloudy, or contains debris.
- Test strips or a refractometer show weak freeze protection.
- The engine runs hotter than normal.
- The heater is not producing enough heat.
- There are signs of leaks, such as residue around hoses or the radiator.

Coolant Exchange vs. Drain and Fill
A basic drain and fill only removes the coolant that drains out of the radiator. A large share of the old coolant stays in the engine block, heater core, and hoses, where it mixes with the new fluid. The result is diluted coolant that may not give full protection.
An exchange machine like the C-VAC3 moves fluid through the whole cooling system. Old coolant is pulled out while new coolant goes in, so more of the old fluid is replaced. Customers get better protection, and the shop gets a faster, cleaner process with less mess on the floor.
Choosing the Right Coolant
Modern vehicles use several different coolant formulas, and mixing the wrong types can reduce protection. Always check the vehicle owner’s manual or service information for the correct coolant. When you change coolant types, rinse the new fluid tank, label it, and train technicians to confirm the match before every job.
If your shop is also expanding its service bays, our car lifts can help you add capacity.

Making Coolant Service Profitable
Coolant service is a routine maintenance item listed in most vehicle maintenance schedules. A fast, clean exchange makes it easy to offer during oil changes, inspections, and seasonal checkups. With fast, easy coolant changeover, the C-VAC3 lets you keep two coolant types on board in its two 7-gallon new fluid tanks. Train service advisors to check coolant condition and explain the benefits, and the machine can become a steady source of service revenue.
Keeping the Service Area Clean
Coolant spills are slippery and can be harmful to pets and wildlife. A closed exchange system like the C-VAC3, with quick seal connectors that keep fluid inside the hoses, helps keep fluid off the floor. Keep absorbent pads and a drip pan handy for hose connections, and clean up any drips right away. Store the machine with the hoses coiled and the tanks capped so it is ready for the next job.
Servicing EV Cooling Systems
Electric and hybrid vehicles use coolant to manage the temperature of batteries, motors, and power electronics. Some EV cooling systems are designed for lower working pressures than traditional engine cooling systems. The optional pressure reducer (40100154) lowers the C-VAC3’s working pressure to a level compatible with EV cooling systems. Always follow the vehicle maker’s service procedures and safety precautions for high-voltage vehicles.
Who Should Buy the Flo-Dynamics C-VAC3?
- General auto repair shops
- Dealership service departments
- Fleet maintenance garages
- Quick-lube centers that offer coolant service
- Shops that do cooling system repairs and diagnostics
- Shops servicing hybrid and electric vehicles
If your shop is adding bays, our car lifts can help increase capacity.
Planning Fluid Service in Your Shop
Many shops group fluid services in one area, with oil, coolant, transmission, and brake fluid equipment close together. Placing the C-VAC3 next to your other fluid machines makes it easy for technicians to offer several services on the same visit. Plan storage for new coolant and used coolant drums close to the machine.


Why Pressure Testing Matters
Many cooling system problems start with a small leak. A loose clamp, a cracked hose, a weeping water pump, or a worn radiator cap can let coolant escape slowly. Over time, low coolant can lead to overheating and engine damage. Pressure testing the system and the cap helps technicians find these problems before they become major repairs.
Because the C-VAC3 can pressure test as well as drain, fill, and flush, technicians can confirm the system is sealed before adding new coolant. That saves fluid and helps make sure the customer leaves with a reliable repair.
Training Technicians on the C-VAC3
The easy-to-use control panel makes the C-VAC3 simple to learn, but each service has its own steps. Walk every technician through vacuum drain and fill, inline flush, draining for component change, and pressure testing before using the machine on customer vehicles. Keep the manual with the machine, and post a short checklist for each service nearby.
Getting the Most From Your C-VAC3
Keep both new fluid tanks filled and labeled, empty the waste tank daily, and store the adapters and accessory kit on the cart. Check hoses and connectors weekly. Track how many coolant services, repairs, and pressure tests you complete each month to see how much value one multi-service machine brings to your shop.
Draining for Component Changes
When a technician replaces a radiator, water pump, thermostat, heater core, or hose, the cooling system must be drained first. Draining by opening a petcock or pulling a hose can be slow and messy. The C-VAC3’s drain function pulls the coolant out into the waste tank, keeping the floor clean and speeding up the repair. After the new part is installed, the same machine can pressure test the system and vacuum fill it, so the whole job is done with one cart.
Built for Daily Shop Use
The C-VAC3 is built to be rolled from bay to bay every day. Its compact footprint fits between lifts and benches, and its quick seal connectors and automatic tank shutoff help keep each job clean. With all its services in one machine, technicians spend less time hunting for equipment and more time completing repairs.
Before you order, confirm that your shop air supply and a 12V source are available at the bays where the machine will be used, and plan where used coolant will be stored. A little planning makes the first job quick and easy.
Frequently Asked Questions About the C-VAC3
What services does the C-VAC3 perform?
It performs vacuum drain and fill, inline flush and exchange, drain for component change, and pressure testing of the system and radiator cap.
How is it powered?
It uses 12V DC and shop air.
How big are the tanks?
It has two 7-gallon new fluid tanks and an 8-gallon waste tank.
What step adapters are included?
Step adapters in 1-1/8″, 1-3/8″, 1-1/2″, and 1-3/4″ sizes with matching hoses are included.
Can it be used on electric vehicles?
An optional pressure reducer (40100154) reduces working pressure to a level compatible with EV cooling systems.
Does it have automatic shutoff?
Yes. The new and waste fluid tanks have automatic shutoff with an indicator.
How big is it?
It measures 52 inches high, 23 inches wide, and 27 inches deep.
How much does it weigh?
The C-VAC3 weighs 159 lbs.
Order the Flo-Dynamics C-VAC3 Today
The Flo-Dynamics C-VAC3 combines vacuum drain and fill, inline flush and exchange, and pressure testing in one easy-to-use machine. With quick seal connectors, automatic tank shutoff, step adapters, and an optional EV pressure reducer, it is ready for nearly any coolant job. Contact Ironside Garage with questions, and browse our full range of shop equipment.
Related products
Atlas Extra Large Pressurized Sandblast Cabinet
Atlas Extra Large Pressurized Sandblast Cabinet The Atlas PSBC990 pressurized sandblast cabinet features a higher velocity stream that allows work to be done up to 4 times faster than other sandblast cabinets on the market. The direct pressure system which pneumatically pushes the blast media throug
Atlas SBC1200 X-Large Sandblast Cabinet
Atlas SBC1200 X-Large Sandblast Cabinet with Dual Doors & Vacuum The Atlas SBC1200 sandblast cabinet takes many of the already great features of the Atlas® SBC990 blasting cabinet and doubles them. The SBC1200 sandblast cabinet has two, front and rear, extra large top open loading doors and features
Atlas SBC420 Standard Sandblast Cabinet with Vacuum
Atlas SBC420 Standard Sandblast Cabinet with Vacuum The Atlas® SBC420 sandblast cabinet features dual side doors and a large front door for easy loading and unloading. The lower hopper stores the abrasive material for reuse or easy removal. The SBC420 cabinet is always ready when you are. The cabine
Cool Boss CB-28L Portable Evaporative Air Cooler
Cool Boss CB-28L Portable Evaporative Air Cooler The CB-28 is a medium-duty commercial-grade cooler that is well-suited for large industrial space cooling. When temperatures rise and you’re looking for a cost-effective cooling solution, look no further than Cool Boss. The CB-28 evaporative cooler pu
Portacool Apex 1200 Wi-Fi Enabled High Velocity Portable Evaporative Cooler for 1200 sq ft
Portacool Apex 1200 Wi-Fi Enabled High Velocity Portable Evaporative Cooler for 1200 sq ft Meet the Portacool APEX™ 1200—a game-changer for mid-sized spaces demanding serious cooling. Delivering a powerful 4,000 CFMs of airflow that spans up to 40 ft., this unit ensures consistent comfort across 1,2
Ranger RP-30FCH oil filter crusher
Ranger RP-30FCH oil filter crusher can apply 30,000 lbs. of crushing force against used oil filters that need to be completely drained of residual oil. It features a manual stainless-steel handle which is ergonomically placed on the side of the crusher to safely manage its two-way stop-and-start ope

Reviews
There are no reviews yet.