Ranger RS-500DS Stainless Steel Spray Wash Cabinet

$12,995.00

Ranger RS-500DS Stainless Steel Spray Wash Cabinet

SKU: IRG0519 Categories: ,
Description

The Ranger RS-500DS is a stainless-steel spray wash cabinet that uses hot, high-pressure water and detergent to degrease automotive parts automatically. With a 30-inch turntable, a 500-lb. load capacity, a 50-gallon tank, and a 6 kW heater, the RS-500DS cleans dirty, bulky parts quickly while its stainless construction resists rust for long service life.

Ranger RS-500DS Stainless Steel Spray Wash Cabinet

 

Powerful, Safe and Rapid Hot Wash with a new Stainless-Steel Cabinet by Ranger

Spray wash cabinets have a new face with a completely stainless steel construction and top-of-the-line features! The RS-500DS has all of the key features and components that make the RS-500D a superior automotive parts washer, with an additional rust-free stainless steel construction. This high-quality stainless steel is entirely resistant to deterioration and the harmful effects of rust, which ensures that your parts washer was built to stand the test of time.

Like the RS-500D, the RS-500DS parts washer utilizes the latest in spray wash cabinet technology to degrease the dirtiest and bulkiest parts in your garage. With a wide cabinet space—and the removable parts tree for your smaller car parts—the RS-500DS provides a deep clean on automotive parts of every shape and size. The 30” diameter turntable ensures an evenly distributed wash, while the powerful multi-directional spray jets and detergent do all the heavy lifting.

Like every piece of Ranger equipment, this spray wash cabinet was designed with the features and quality that sets it a cut above the rest. With professional-grade features, including dual water heaters, adjustable thermostat, automatic low-water shut off and stainless steel oil skimmer, the RS-500DS demonstrates Ranger’s commitment to enhanced performance and productivity.

Some of these features like the oil skimmer and tank drain, as well as the stainless steel nozzles and contamination-proof cabinet welds, keep your parts washer looking and working its best no matter how dirty things may get. The quality can be seen in every facet, from the new rust-free stainless steel construction to the non-marring castors, the RS-500DS has a rugged and heavy-duty build that will easily outlast the competition.

Features

Heavy-duty stainless steel construction

Safe aqueous operation: No harsh chemicals

50 gallon tank

Dual water heaters for quick startup

Heated cabinet w/ adjustable thermostat

High-power spray jets clean parts fast

Automatic low water shutoff

Removable tank screen

Stainless oil skimmer

Removable parts tree

Powder coat finish

Stainless steel nozzles

Full opening octagonal door

Large drain pipe

Heavy-duty casters

Friction-drive turntable system

Neoprene-sealed wash cabinet

Contamination-proof interior welds

Gasket-free door

Small parts basket

Stainless steel handles

Free bucket and soap included

Overall height: 66″ (1,676 mm)
Inside height: 43″ (1,092 mm)
Inside width: 32″ (813 mm)
Turntable diameter: 30″ (762 mm)
Tank capacity: 50 gallons
Load capacity: 500 lbs. (227 kg)
Cycle timer: 0 – 60 min
Recommended floor space: 44″ x 43″ (1,118 mm x 1,092 mm)
Brass nozzles: 18
Steel construction: 12 Gauge / .109 thickness
Pump output: 75 psi @ 70 gpm
Motor: 1 HP / 208-230V / 60 Hz
Electric heater: 6 kW
Water temperature: 160° – 180° F (71° – 82° C)
Shipping weight: 750 lbs. (336 kg)
Shipping dimensions: 36″ x 44″ x 68″ (914 mm x 1,118 mm x 1,727 mm)

RS-500DS Specifications

  • Overall height: 66 inches
  • Inside height: 43 inches; inside width: 32 inches
  • Turntable diameter: 30 inches
  • Load capacity: 500 lbs.
  • Tank capacity: 50 gallons
  • Cycle timer: 0–60 minutes
  • Spray nozzles: 18
  • Pump output: 75 psi at 70 gpm
  • Motor: 1 HP, 208–230V, 60 Hz
  • Electric heater: 6 kW
  • Water temperature: 160°–180°F
  • Steel construction: 12 gauge (.109″)
  • Recommended floor space: 44″ x 43″
  • Shipping weight: 750 lbs.

RS-500DS Features

  • Stainless-steel cabinet construction for rust resistance
  • Adjustable thermostat and cycle timer
  • High-power spray jets with stainless steel nozzles
  • Friction-drive turntable for even cleaning
  • Automatic low water shutoff
  • Removable tank screen and stainless oil skimmer
  • Removable parts tree and small parts basket
  • Full-opening octagonal, gasket-free door
  • Neoprene-sealed wash cabinet with contamination-proof interior welds
  • Large drain pipe and heavy-duty casters
  • Free bucket and soap included

Stainless Steel That Lasts

Parts washers live in a harsh environment of hot water, detergent, and grime. Over time, ordinary steel cabinets can rust and deteriorate. The RS-500DS is built with stainless steel that resists rust and corrosion, so it’s designed to stand up to years of daily use. It includes the key features of Ranger’s RS-500D with the added durability of stainless construction.

Hot, High-Pressure Cleaning

A 6 kW heater brings water to 160–180°F, and a 1 HP pump delivers 75 psi at 70 gallons per minute through 18 nozzles. Hot water and detergent break down grease, oil, and grime, while high-volume spray carries it away. The result is clean parts without hours of hand scrubbing or solvent tanks.

Even Cleaning on a Turntable

Parts sit on a 30-inch turntable that rotates during the cycle, exposing every surface to the spray. The friction-drive turntable system supports up to 500 lbs., so you can wash heavy components like engine blocks, transmission cases, and differentials.

Who Should Buy the RS-500DS

  • Engine builders and machine shops
  • Transmission and drivetrain rebuilders
  • Fleet maintenance facilities
  • General automotive repair shops
  • Heavy equipment and agricultural shops
  • Industrial maintenance departments

Explore more equipment in our shop equipment section.

How to Use the RS-500DS

  1. Fill the 50-gallon tank with water and add the recommended detergent.
  2. Set the thermostat and allow the water to heat to 160–180°F.
  3. Load parts on the turntable, using the parts tree or basket for small items.
  4. Close the full-opening door.
  5. Set the cycle timer for up to 60 minutes and start the wash.
  6. When the cycle ends, open the door carefully and remove hot parts with gloves.
  7. Rinse and dry parts as needed before inspection or assembly.

RS-500DS key specifications

Safety Guidelines

Water and parts can be very hot. Wear heat-resistant gloves and eye protection when unloading. Keep the door closed during operation, follow the detergent manufacturer’s guidance, and use proper electrical connections for the 208–230V supply. Follow Ranger’s operating instructions and local rules for wastewater disposal.

Maintenance Tips

  • Skim oil regularly with the stainless oil skimmer.
  • Clean the removable tank screen to prevent clogs.
  • Drain and clean the tank periodically.
  • Check nozzles and clear any blockages.
  • Inspect the turntable drive for smooth rotation.
  • Keep the water level above the low-water shutoff point.

Why Spray Wash Cabinets Beat Solvent Tanks

Solvent parts washers require technicians to scrub parts by hand, which is slow and exposes them to chemicals. A spray wash cabinet like the RS-500DS uses hot water and detergent instead, cleaning parts automatically while technicians do other work. Many shops find spray cabinets faster, cleaner, and more pleasant to use than solvent tanks.

Save Labor Hours

Hand-cleaning a greasy engine block or transmission case can take an hour or more. With the RS-500DS, you load the part, set the timer, and walk away. That frees technicians for billable work and makes the whole shop more productive.

Engine and Transmission Rebuilding

Rebuilders need parts that are truly clean before inspection and machining. Oil, sludge, and carbon can hide cracks and wear. The RS-500DS’s hot, high-pressure spray removes grime from blocks, heads, cases, and housings, preparing them for inspection, measurement, and machine work. With a 43-inch inside height and 32-inch inside width, it fits many large components.

Fleet Maintenance

Fleet shops service many vehicles and clean a lot of parts. The RS-500DS helps keep up with that volume by automating the cleaning process. Technicians can load parts at the start of a job and return to clean components ready for reassembly, reducing downtime.

Heavy Equipment Parts

Agricultural and construction equipment parts are often caked with mud, grease, and oil. The RS-500DS’s 500-lb. capacity and powerful spray tackle these heavy, dirty components. Clean parts make inspection easier and help technicians spot problems that might otherwise be missed.

Gasket-Free Door and Sealed Cabinet

The full-opening octagonal door is gasket-free, so there’s no door gasket to wear out or replace. The neoprene-sealed wash cabinet and contamination-proof interior welds help keep water and detergent where they belong, inside the cabinet.

Oil Skimming and Screening

As parts are cleaned, oil and debris collect in the wash water. The stainless oil skimmer removes floating oil, and the removable tank screen catches debris. Keeping the water clean helps the RS-500DS clean parts more effectively and extends the life of the wash solution.

RS-500DS

RS-500DS cleaning features

Planning Your Installation

The RS-500DS requires about 44 x 43 inches of floor space and stands 66 inches tall. Plan for a 208–230V electrical supply sized for the 1 HP motor and 6 kW heater, ideally installed by a licensed electrician. Choose a location near a suitable drain or plan for proper wastewater collection. Leave room in front for the full-opening door and for loading heavy parts, ideally with access for a hoist or cart. Heavy-duty casters help with positioning during setup.

Choosing Detergent

Use a detergent formulated for spray wash cabinets. The right detergent breaks down grease and oil effectively while protecting the cabinet and parts. Follow the detergent manufacturer’s dilution recommendations and check the solution regularly. A free bucket and soap are included to get you started.

Loading Parts for Best Results

Place larger parts in the center of the turntable and position them so spray can reach all surfaces. Use the parts tree for items like brackets and covers, and the small parts basket for bolts and small components. Avoid stacking parts in a way that blocks spray. Proper loading helps every part come out clean in a single cycle.

Drying and Rust Prevention

After washing, parts are hot and will flash-dry quickly. For bare steel or cast iron parts that will sit before assembly, apply a rust preventive or light oil once they’re dry. This protects freshly cleaned surfaces from flash rust.

What Users Appreciate

Users often highlight the stainless steel construction and the hands-free cleaning as the RS-500DS’s biggest benefits. Loading a heavy part, closing the door, and returning to a clean component saves hours each week. The gasket-free door, oil skimmer, and generous capacity round out a washer built for busy shops.

A Typical Day in the Shop

At a busy engine shop, a technician pulls a greasy cylinder block and a set of heads from a customer’s engine. Instead of spending an hour scrubbing at a solvent tank, they hoist the block onto the RS-500DS’s turntable, place the heads beside it, and hang smaller brackets on the parts tree. They close the door, set the timer, and move on to disassembling another engine. When the cycle finishes, the parts come out clean and ready for inspection. Over the course of a day, that hands-free cleaning adds up to hours of saved labor.

Improving Shop Cleanliness

Solvent tanks and hand-scrubbing can leave a mess of grime and chemicals around a shop. The RS-500DS contains the cleaning process inside a sealed cabinet. Grease and oil are captured in the tank and skimmed off, keeping work areas cleaner and more pleasant. A cleaner shop is safer and makes a better impression on customers who visit.

Worker Comfort and Safety

Scrubbing parts by hand exposes technicians to harsh chemicals and repetitive strain. Automated spray washing reduces that exposure. Technicians simply load and unload parts, wearing gloves and eye protection, while the machine does the hard work. It’s a healthier, more comfortable way to clean parts.

RS-500DS built to last

Investing in Productivity

A spray wash cabinet pays off through saved labor, better quality inspections, and a cleaner shop. The RS-500DS’s stainless construction adds long-term value by resisting rust that can shorten the life of standard cabinets. For shops that clean parts every day, it’s a smart, durable investment.

RS-500DS vs. RS-500D

Ranger’s RS-500D and the RS-500DS share the same key cleaning features and capacities. The difference is construction: the RS-500DS uses stainless steel, which resists rust and deterioration from constant exposure to hot water and detergent. If you want maximum longevity and a cabinet that stays looking good for years, the stainless RS-500DS is the upgrade. Our team can help you compare the two based on your budget and usage.

Water Management

The automatic low water shutoff protects the heater and pump if water drops too low. Check the water level daily and top it up as needed, since evaporation from hot water is normal. Drain and refresh the solution when it becomes heavily contaminated, following local rules for wastewater and oily waste. Keeping the solution clean improves results and extends component life.

Small Parts Cleaning

Bolts, washers, brackets, and other small components can easily get lost or blown around in a spray cabinet. The included small parts basket and removable parts tree keep them organized and secure during the wash cycle. That makes it easy to clean everything from a single job together and keep parts sorted for reassembly.

Getting Started

If your shop is ready to stop scrubbing parts by hand, the RS-500DS is a great choice. Contact our team to confirm your electrical and drainage requirements, ask about detergents, and arrange freight delivery. We’ll help you get set up so you can start cleaning parts automatically right away.

Machine Shops and Rebuilders

Machine shops depend on clean parts for accurate measurements and quality work. Grease and carbon can throw off measurements and contaminate machining equipment. The RS-500DS delivers consistently clean parts, helping machinists inspect, measure, and machine components with confidence. Rebuilders appreciate how quickly it prepares cores for evaluation, helping them decide what can be reused and what needs replacement.

From engine blocks and transmission cases to brackets and small hardware, the RS-500DS makes parts cleaning fast, safe, and hands-free. Its stainless-steel construction, powerful hot-water spray, and generous capacity make it a dependable workhorse for any shop that cleans parts every day. Reach out to our team at Ironside Garage with questions about setup, detergents, or delivery, and we’ll help you get started.

Once you see how much time the RS-500DS saves on every engine, transmission, and differential job, it quickly becomes one of the most valued machines in the shop, helping your team deliver cleaner work, faster turnarounds, and better results.

With hot, high-pressure cleaning, a durable stainless cabinet, and simple controls, the RS-500DS helps shops of every size spend less time scrubbing and more time on the repair and rebuild work that keeps customers coming back again and again.

Frequently Asked Questions About the RS-500DS

What is the load capacity?

Up to 500 lbs. on a 30-inch turntable.

How hot does the water get?

160–180°F, heated by a 6 kW electric heater.

How big is the tank?

50 gallons.

What is the pump output?

75 psi at 70 gallons per minute.

What power does it need?

208–230V, 60 Hz, with a 1 HP motor.

Is it stainless steel?

Yes, the cabinet is stainless steel for rust resistance.

Support From Ironside Garage

Our team can help you plan electrical and drainage requirements and arrange freight delivery of the RS-500DS. Contact us with any questions.

Order the RS-500DS Today

The Ranger RS-500DS is a proven, powerful stainless-steel spray wash cabinet. For guidance on safe wastewater handling, see the U.S. EPA, and explore our car lifts to complete your shop.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Ranger RS-500DS Stainless Steel Spray Wash Cabinet”

Your email address will not be published. Required fields are marked *

Shipping & Delivery